I bought a VGC 1000 last weekend. It has the same prob my 2000 was having, in-game moving to the 5:00 position by itself, example Lego Potter. I tested using the browser cursor, it doesn't move by itself, but is fast pushing down or right but slow up or left. Likewise, in the game Third Birthday, first two directions are running, latter two walking. And I tried the less invasive rotate stick to calibrate in System Settings, no help. So, stick, pad, or cleaning? And electronic cleaner vs alcohol?
@ICHIBANnerdy you can put it back,you know the two holes?get a needle then put it inside the two holes,then twist the spring so they will interchange and eventually theyll stick :D.
@AnarickTheDevil u should have been more careful, hes teaching you how to do it, he did not told you to make it worse. first memorize the whole thing and then do it ( im saying it in a good way : ) )
@austbro777onps3 If you want to change the color of the actual stick your thumb comes in contact with it's 15 seconds, this is the disassembly and reassembly of the entire analog stick. You fail, not only as a person, but as a person choosing a screenname.
Be sure the metal guide is aligned to the analog stick and flushed. Then just align the gray and the white. When you attach the small circuit board, be sure it is flushed cause it will tell you if everything is properly aligned. Keep at it. I was having the same problems till I finally figured it out. My problem was that i was installing everything backwards. I changed the direction of the meal and plastic guides and bingo!
Man thank you so very much, I disassembled my analog and I hadn't no idea about that son of b... spring inside the stick, so when I decided to put that together again, I just find no solution for the spring, but you saved my PSP with this video, once again thank's man !
This worked wonders for me. Really glad I found this video. Thanks to the creator of this video, and thanks to you AskJeeves for uploading it on youtube. Saved me alot of trouble and money!
do you have a psp 2000 slim tutorial? i coz i was wondering where that little white rubber go to? when i open my analog stick, there was a little white rubber inside with 4 yellow (something) in it.. i dunno where to place it.. pls help
I will tell you one damn thing...I took it apart, I did a fine and dandy job. I got to the part where I was replacing the spring. Yeah, thats a JOKE! I am just going to take the "shell casing, AND the spring" and nicely place it under the rear wheel of my vehicle and put it in reverse, then drive, then reverse, then I am going to return my vehicle into its rightful place in the garage. Maybe a bird can use it in their nest building. What a waste of 4 hrs.
OMG THE SPRING IS SO ANNOYING! I GIVE UP I'M BUYING A NEW ONE!!!! Thanks for this video. Oh btw my analog and stuff looks different. Look at my channel ... I need a analog if you guys want me to make more videos
I bought my PSP fat about 2 years ago and I just started cleaning the analog stick coz it's already starting to stick. After cleaning out the grey gunk on the circuit board and something fell I saw that it was the spring and the grey nub. It was hell to get back on but after checking this vid I got it back in less than 2 mins. Thanks a bunch.
to be honest i wouldnt trust myself to do this considering that im not the most delicate person in the world.lol. but i definitely need to fix my analog stick somehow
i put back together and it works before i put the circuit bord on. once i put the circuit bord back on and the clip the anolog stick wont even move any more..
PASS THIS ON TO OTHERS: Anyone fixing any psp analog stick problem, if you clean the prongs and it still feels sticky by feel, just add a small piece of paper behind the thumb pad all wadded up. The thumb piece just pops right off, the paper you add to the hole on the back will make it in fact longer so it wont rub against the PSP front it's self. Mine is awesome now and better then new.
great video bro help me a lot but my joystick sill gets stuck but i was able to take everythin aprt and put it back 2gether cuz u thx a 100000000000000000000000000000000000000000000000000000
Can anyone tell me where i can buy a official psp slim analog stick for cheap as possible?? I bought 2 generics and for the price they were okay. But on some games like gitaroo hero its just not smooth enough and will jam up at times.
i need help when i play a game my analog stick works fine until a few mins later when i press up or left it moves slow or doesnt move at all. how do i fix that?
If the metal guide doesn't hold the analog nub in place anymore, you need to buy a new replacement unit. A lot of the aftermarket 'oversized' analog nubs will cause the analog nub to rotate, which damages the internals. Basically, as you play your game, the nub spins and rubs against the metal guide, slowly shaving it down and making it round instead of rectangular (this is internally). The peg that moves the guides becomes rounded slowly and causes the analog nub to rotate.
Don't lose the clear silicon 'contact' piece that connects from the PSP motherboard to the analog stick unit. It is a clear piece about 1cm long with four wires running through it. They need to be facing upwards when placed on the motherboard so that the wires connect the analog stick unit to the motherboard. Make sure it isn't turned sideways.
If the analog stick still drifts after you've installed it, you need to tighten up the faceplate screws (on the side that it is drifting to)
Here's a few tips from the guy who actually made the video (me):
If the spring came apart, that's OK, you can 'connect' the two ends back together and try again. However, if the spring is deformed, it will never work again and you'll just need to buy a new replacement unit.
DON'T MASH THE THING TOGETHER. Apply a nice, steady force, but don't MAKE it go. If you apply a nice, steady force while rotating the analog nub, it will seat the spring into place.
Great Great great great. i just fixed my analog stick, For me it was a lot more than just 10 bucks, because where I live analog sticks where way more expensive. thanks a lot (and excuse the bad english)
Thank you so much! You explained what i needed to know to the "t". The spring was what was giving me the most trouble. You saved me from buying a guide. Great video! Thanks again.
I just did it with psp slim analog, but method for spring in this vid was just deforming it but I found another way. First I took the bottom plastic part put "the thing that you place nub on" and put spring on top of everything then I gently put top plastic part and used small and thick screwdriver to make spring fit there (I was gently pushing top part so it would immediately close when spring got to it's place). Inventing this idea took me a while but performing took ~2 mins :)
hey dude, u know the silver component that goes under the guides? mine won't keep my analog stick stable, and it spins around when i play. help please?
the spring iz a bitch
godinez623 6 days ago
I bought a VGC 1000 last weekend. It has the same prob my 2000 was having, in-game moving to the 5:00 position by itself, example Lego Potter. I tested using the browser cursor, it doesn't move by itself, but is fast pushing down or right but slow up or left. Likewise, in the game Third Birthday, first two directions are running, latter two walking. And I tried the less invasive rotate stick to calibrate in System Settings, no help. So, stick, pad, or cleaning? And electronic cleaner vs alcohol?
SyzygyD 1 week ago
My spring went undo I tried putting it back together and ended up stretching it as long as it could
other155 1 month ago
You are awesome....!!!
Kankonas 1 month ago
THANKS OBRIGADOOOOO
EleTTronBR 3 months ago
@ICHIBANnerdy you can put it back,you know the two holes?get a needle then put it inside the two holes,then twist the spring so they will interchange and eventually theyll stick :D.
Haengbokhae123 4 months ago
ummm, my spring is no longer connected to itself. do i have to get a new spring or can i put it back to together?
ICHIBANnerdy 4 months ago
where does the black washer go
RamiroRaZ13 4 months ago
great help
JamiasSs 4 months ago
thanx buddy =]
Stanley10scorpion 5 months ago
help i cant put the spring back!
QuamtumXGamers 5 months ago
Can you help me assemble it? is the metal prongs supposed to stick up?? When they do, the chip wont go back onto my PSP :(
theowlsofouterheaven 6 months ago
Thank god. I thought i was doomed.
mro8623 6 months ago
I took my analog apart AND THE STRING BROKE the two circle things somehow got seperated and idk how to put them back together PLEASE HELP!
alinktomyfist 6 months ago
does that work for psp 2000 analog?
ZeroVersusXIII 7 months ago
thanks man, i really needed this
ZeroVersusXIII 7 months ago
thanks for uploading buddy
alvadrive42 7 months ago
thank very much
MrBanam06 7 months ago
Dude next time have a better Camera it makes it alot easier so people could see wut u did ok Thx( i said tis in a nice Way!!) And Nice Video!
kratos241revenge 7 months ago
gracias viejo me ayudo mucho tu tuto
wiliato 7 months ago
Thanks friend, excellent video, helped me a lot
Gracias amigo, excelente video, me ayudo mucho
jrojasquiara 7 months ago
gracias mi gringazoo!!!
mexiqO86 8 months ago
Thanks
TheDetoned 8 months ago
Thaaanks brooot' :DD (YYY'
sSziicko0op 9 months ago
thank you lol, i turned mine upside down and al teh shit came out~~~~
ThreeDaysOfDan 9 months ago
Thanks MAN!
TheUsMan91 9 months ago
thnx you very much dude i was so nervouse when i opend my analog stick thnx a lot
crysisinwar 9 months ago
thanks...this video helped me a lot!
Dyeriko86 10 months ago
great now its worse thanks allot jerk
AnarickTheDevil 10 months ago
@AnarickTheDevil u should have been more careful, hes teaching you how to do it, he did not told you to make it worse. first memorize the whole thing and then do it ( im saying it in a good way : ) )
ZeroVersusXIII 7 months ago
thanks ure my real help
MegaDragonWhite 10 months ago
thanks man...
thewildestmanever 10 months ago
O my gosh bro thnx I've been tryin to fix it thnx I subscribed bro thnx!!!¡!!!!!!!!
ITouchCjZaVe12 10 months ago
hey thanks this really helped but i have a question.... can you replace that spring with the one you get in a psp slim??
mazda5298 11 months ago
OMG
THANK YOU SO MUCH
MinicraTony 11 months ago
This has been flagged as spam show
tnkz from Colombia!!! xD
Yermak81 11 months ago
thnk vm from Colombia xD
Yermak81 11 months ago
nice video...
satanictribe 1 year ago
/watch?v=_9eQc5BaBuc
This Really Helps
spudsrob 1 year ago
@austbro777onps3 If you want to change the color of the actual stick your thumb comes in contact with it's 15 seconds, this is the disassembly and reassembly of the entire analog stick. You fail, not only as a person, but as a person choosing a screenname.
DuctTapedGoat 1 year ago
very very helpful, thanks a lot!!!
djbosk 1 year ago
nice thanks so much man
gothixxx12 1 year ago
Thanks dude that was tons of help :)
ThePaco7495 1 year ago
wow all this just to change your analog stick... this fails
austbro777onps3 1 year ago
i havea psp 3004 and the manuals arent in english
elitepspgamer 1 year ago
deafeat by ... spring. that at 1:25 ;(
jj12345678999 1 year ago
NO FUCKING WAY!!! .THIS FUCKING SPRING DON'T WANT BE TRACTABLE. ARGHHHHHHHHHHHHHHH
jj12345678999 1 year ago
Really appreciate the help here bud. Very helpful indeed. Damn thing works now. Thanks!
doublejay74 1 year ago
man thank u very much i was able to fix a faulty analog stick that tended to go in one direction....
i opened the analog and it was all dirty with a kind of rubber and when i cleaned now it feels very smooth and great...
thank you
DIGAUbrawl 1 year ago
thank u
DIGAUbrawl 1 year ago
Thank you very much! :D
aladaris 1 year ago
Thanks thanks thanks.
gdrack 1 year ago
sir help me my analog cant move up and down? even replacing analog and the analog moving in games but in browser its ok whats the problem?
technoboi15 1 year ago
Thanks ThanksSS :) you helped me
ThEADCKiLLeR 1 year ago
Thanks a lot it's really helpful
MPS4U 1 year ago
Hmm it stopped working. For some reason the white guide wont move when the analogue does. Does anyone know how to fix this?
phadinglove 1 year ago
@phadinglove
Be sure the metal guide is aligned to the analog stick and flushed. Then just align the gray and the white. When you attach the small circuit board, be sure it is flushed cause it will tell you if everything is properly aligned. Keep at it. I was having the same problems till I finally figured it out. My problem was that i was installing everything backwards. I changed the direction of the meal and plastic guides and bingo!
doublejay74 1 year ago
@doublejay74
I ended up putting it in backwards also haha...oops.
phadinglove 1 year ago
Ah! This was perfect, thank you so much!
phadinglove 1 year ago
Man thank you so very much, I disassembled my analog and I hadn't no idea about that son of b... spring inside the stick, so when I decided to put that together again, I just find no solution for the spring, but you saved my PSP with this video, once again thank's man !
JPJHDD 1 year ago
Is this for psp 1000?
and does this fix an analog that moves on its own (not physically)?
my analog is like that, might try this
mattkd100 1 year ago
This worked wonders for me. Really glad I found this video. Thanks to the creator of this video, and thanks to you AskJeeves for uploading it on youtube. Saved me alot of trouble and money!
ArchideasX 1 year ago
thanks a lot! this guide saved my life.
setoman1 1 year ago
do you have a psp 2000 slim tutorial? i coz i was wondering where that little white rubber go to? when i open my analog stick, there was a little white rubber inside with 4 yellow (something) in it.. i dunno where to place it.. pls help
hawkerrose99 1 year ago
thanks you helped me but the spring dosn't do its job-->when i push the analog in any direction it stays there any help???
micmoi55 1 year ago
finaly one useful video.
jakiesnumerki 1 year ago
Excellent, that tricky little spring jumped out at me before I had a chance to see its placement. Thank you VERY much.
SirRoachtokeMacPuff 1 year ago
thanks a lot
(:
ihgsdf 1 year ago
Thaaanks a lot buddy!
I've had a hard time placing the spring back on place but now it is working!
Great video and help! :)
Pichustrikesback 1 year ago
psp 1000 analog?
analizious 1 year ago
my analog stick came off any idea?
gary22566 1 year ago
will this help analog sticks that drift?
93abm 1 year ago
good help
ticote81 1 year ago
thanks man idk how to put the spring back on thanks alot man i searched al over the place but i finally found this vid thanks again
fredhead41 1 year ago
ok idk anything bout that psring,but what does thet little rubber part do on the other circuits(on psp mother board)
xandirful 1 year ago
thanks for posting..
Neztle 1 year ago
I will tell you one damn thing...I took it apart, I did a fine and dandy job. I got to the part where I was replacing the spring. Yeah, thats a JOKE! I am just going to take the "shell casing, AND the spring" and nicely place it under the rear wheel of my vehicle and put it in reverse, then drive, then reverse, then I am going to return my vehicle into its rightful place in the garage. Maybe a bird can use it in their nest building. What a waste of 4 hrs.
adiktidtome 1 year ago
thanks for the vid! i just fixed mine and my god i was so annoyed with the spring but i finally got it after a couple of minutes
zeipherx1 1 year ago
OMG THE SPRING IS SO ANNOYING! I GIVE UP I'M BUYING A NEW ONE!!!! Thanks for this video. Oh btw my analog and stuff looks different. Look at my channel ... I need a analog if you guys want me to make more videos
SwayzeDre 1 year ago
FUCK THE SPRING
kostas2419 1 year ago
thanks a lot!!!
isaaccuddles 1 year ago
Can someone make a vid that you can fix a luse joy stick please
richdude9handipoits 1 year ago
i just lost the spring
chlodnia 1 year ago
nice tut xD
beelee100 1 year ago
how the fuck do i get the spring back on
xHAxFatherSky 1 year ago
I bought my PSP fat about 2 years ago and I just started cleaning the analog stick coz it's already starting to stick. After cleaning out the grey gunk on the circuit board and something fell I saw that it was the spring and the grey nub. It was hell to get back on but after checking this vid I got it back in less than 2 mins. Thanks a bunch.
God Bless
grailph 1 year ago
how do i put the springer back on it uncliped
956ratattouie 1 year ago
956ratattouie i have the same problem
multinarutorasengan 1 year ago
im trying to fix mines rite now
how does the metal guide go??
with the all flat plart down or up
u kno how on one side is all flat and on the other side it has to things
which way does it go??
i cant really tell how u put it
ImDatYungBrotha 2 years ago
hi AskJeeves17
god work * * * * *
reality work
wilder9777 2 years ago
to be honest i wouldnt trust myself to do this considering that im not the most delicate person in the world.lol. but i definitely need to fix my analog stick somehow
jtyrone 2 years ago
thx brother ^^ i was about to buy a new analog but your tutorial helped me out =)
robcorpses 2 years ago
i put back together and it works before i put the circuit bord on. once i put the circuit bord back on and the clip the anolog stick wont even move any more..
mellowkidXok 2 years ago
OMg thank you
FalloFTrOy069 2 years ago
THANKS
MY
BROTHER
deNiacK117 2 years ago
This spring is a pain in the ass.
flavbr 2 years ago
a really cool trick you can d is take off a ps2 or ps1 stick and melt it to the top of your stick i did it and its perfect
Dominator1212 2 years ago
@Dominator1212 can you make a video how you do it PLEASE???=(
TheMrInferno 2 years ago
This has been flagged as spam show
PASS THIS ON TO OTHERS: Anyone fixing any psp analog stick problem, if you clean the prongs and it still feels sticky by feel, just add a small piece of paper behind the thumb pad all wadded up. The thumb piece just pops right off, the paper you add to the hole on the back will make it in fact longer so it wont rub against the PSP front it's self. Mine is awesome now and better then new.
It's EZ.
EZSEEK 2 years ago
the srping wont go bck in place it would expand and mess up the analog more
kengyaj 2 years ago
thank
S41454r 2 years ago
Thankz man i would b left with a broken joystick if it wasn't for this video Thankz Again
angientony14 2 years ago
This has been flagged as spam show
OK I'm gonna revisit this. Dude you seriously need to be sadistically murdered and raped!!! Eat shit and die!!!
StabbedlnTheKunt6I6 2 years ago
This has been flagged as spam show
Die! I wish you death!!!! If i ever saw you i would kill you and rape your sister!!!! Fuck you!!!! Now excuse me i have to take a piss!
StabbedlnTheKunt6I6 2 years ago
thank you, but the analog stick does not stay in this.
It goes out after a few seconds :(
I have to buy a new one.
fenixthedagoner 2 years ago
I though I was boned when the spring popped out.
Thanks you saved my analog nub.
silentcell88 2 years ago
I'm having trouble getting the spring back in and sugestions?
CURLY16111 2 years ago
watch?v=NaLiRH8LiUU
gek232 2 years ago
dus any1 knw how to fix a jammed anolog coz a used 2 spin it a lot n it is fukd up n onli moves left and right properly lmao
AD4M9 2 years ago
Comment removed
camonjjjjr 2 years ago
thank men
adrianus77 2 years ago
thank yout I thought I was screwed you got my sub
Mrig12000 2 years ago
you are a GENIUS
americanfanatic333 2 years ago
thank you very much i open and did not know how to put it back in lol
thepimpnig 2 years ago
lol
i was drinking milk then i read ur comment my keyboard is white know lol
abujp1993 2 years ago
FINALLY HOW TO PUT THE SPRING ON IT EASY !!!
watch?v=NaLiRH8LiUU
gek232 2 years ago
omfg man thanks so much, u helped so fucken much i could not figure how to fix a problem with it
italianplaya454 2 years ago
will this fix it from cracking?
RatatatatatBang 2 years ago
Thanks man!!!!!! You rule!!!!!!!!!!
piosik83 2 years ago
You rule! Thanks for the video man. =)
demonx406 2 years ago
Dude, you saved me countless hours of game time !!!
HERO OF THE HOUR!! [ 'cause you know some douche is gonna come outta know where and decide this sucks]
Thanks man, your awesome.
WolvesDarkAngel0 2 years ago
i smashed my fat psp got a slim
123454d 2 years ago
Thanks for the spring thing really helped me there =]
majinkidbuu2 2 years ago
i broke my spring dammit and i cant really see how u put the squre things back in order plz help
samking12 2 years ago
I Could NOT work out how to get that spring back in...
Have now fixed my son's psp :-)
Thank you!
Celtic1433 2 years ago
nice video. thank you... it helps me a lot...
keep it up! ;-D
r0r0n0a 2 years ago
Maldito's Gringos (D*P*L)
CasumaMc 2 years ago
it cant hold together. now it broken.
edwintawinner123 2 years ago
my analog moves without moving it!!
jhongventeuno21 2 years ago
omg my spring has problems but then i saw this hahaha thanks a lot and i mean it :D
LXTTLXKXLLXR 2 years ago
thanks alot for the vid it really helped
SPANISH1000 2 years ago
great video bro help me a lot but my joystick sill gets stuck but i was able to take everythin aprt and put it back 2gether cuz u thx a 100000000000000000000000000000000000000000000000000000
skarface760 2 years ago
back in "theeeeeuuree"
hahah llmfao..
dude i tried this then i fucked up my spring i broke that shit
darthopa 2 years ago
apperntly if u go 2 system info on the home menu and rotate it round and round it gets thixed?
wafertastic 2 years ago
Yeah, but I think I have dust in my analog stick, so that can't fix it
RuskyPeon 2 years ago
paste this to 2 other videos
go to your channel and see your comments
JUST DO IT IT SCARY
availguy 2 years ago
dammit.. im afraid to do this and F my psp up.. Im pretty good with fixing shit too.. Ughhhhhhh
staind420 2 years ago
Can anyone tell me where i can buy a official psp slim analog stick for cheap as possible?? I bought 2 generics and for the price they were okay. But on some games like gitaroo hero its just not smooth enough and will jam up at times.
eaw700 2 years ago
in the philippines u can buy it for only 20pesos,men less than 1dollar!!^.^
jhongventeuno21 2 years ago
dude i cant get the spring in i don't know what you mean by the "sides"
jekorpwns 3 years ago
dude thank you so much my psp was broken for 4 months now i can fix it! THANK YOU!
scottydog3138 3 years ago
i need help when i play a game my analog stick works fine until a few mins later when i press up or left it moves slow or doesnt move at all. how do i fix that?
3merge 3 years ago
thanks dude your great
SqarLett 3 years ago
mine keeps going to the left.. what should i do?
Name2012 3 years ago
Mine keeps going left as well. It drives me nuts because on my racing games all of a sudden I will do hard left turns.
DPUMA8 3 years ago
That is the best description of this problem
THANX!!!!!
tfighter94 3 years ago
DUDE! thank you very much! i've just cleaned my psp analog and your video helped a lot! thanks! ;D
greetings from brazil!
lantisearth 3 years ago
what about if dont have the spring , can still do it
b4dboi22071993 3 years ago
dude i caant get da spring baq in
alian483 3 years ago
thanx
guitarplayer2724 3 years ago
my analog button is broken shud i just pull it out i already have a replacement button
Gurchain1984 3 years ago
do you mean the cap has come off?
like is the actual analog stick broken apart? or is it just the small cap that goes ontop?
also is it PSP1000 PSP2000 or PSP3000?
1000/2000 just buy a replacement
but 3000 i dunno where there sold but just go on google and search around a bit
tinymouse2 3 years ago
If the metal guide doesn't hold the analog nub in place anymore, you need to buy a new replacement unit. A lot of the aftermarket 'oversized' analog nubs will cause the analog nub to rotate, which damages the internals. Basically, as you play your game, the nub spins and rubs against the metal guide, slowly shaving it down and making it round instead of rectangular (this is internally). The peg that moves the guides becomes rounded slowly and causes the analog nub to rotate.
ogcalifrag 3 years ago
Don't lose the clear silicon 'contact' piece that connects from the PSP motherboard to the analog stick unit. It is a clear piece about 1cm long with four wires running through it. They need to be facing upwards when placed on the motherboard so that the wires connect the analog stick unit to the motherboard. Make sure it isn't turned sideways.
If the analog stick still drifts after you've installed it, you need to tighten up the faceplate screws (on the side that it is drifting to)
ogcalifrag 3 years ago
Here's a few tips from the guy who actually made the video (me):
If the spring came apart, that's OK, you can 'connect' the two ends back together and try again. However, if the spring is deformed, it will never work again and you'll just need to buy a new replacement unit.
DON'T MASH THE THING TOGETHER. Apply a nice, steady force, but don't MAKE it go. If you apply a nice, steady force while rotating the analog nub, it will seat the spring into place.
ogcalifrag 3 years ago
what if the spring broke?
dhruvb38 3 years ago
thx u save my life and my psp
aludem 3 years ago 2
what should i do if my little spring came apart
lilgreatster 3 years ago
Great Great great great. i just fixed my analog stick, For me it was a lot more than just 10 bucks, because where I live analog sticks where way more expensive. thanks a lot (and excuse the bad english)
camilo862 3 years ago
bad demonstration..if your gonna make a helping video...make it high quality..
bloodstainedlineage 3 years ago
my analog is loss and it can move by it self.....WHAT SHOULD I DO!!!!please tell me how to repair it....???pls....???
zeekross94 3 years ago
I did it how its shown in the video but i cant get the little spring inside !"! HELP PLEASE!!!
yoint123 3 years ago
thanks you really help me
oglynx 3 years ago
THANK GOD UR ALIVE!!!hahaha ive searched like 10000000 videos and urs is the only like discriptive one..thanks again!
F34rl3ss608 3 years ago
That's right! I only live to HELP YOU! haha!
AskJeeves17 3 years ago
my spring from my analog isnt attached like yours. what should i do?
Carl7119 3 years ago
thank you sooo much!
Naruto14494 3 years ago
my spring is streched please help or tell me ohwo or where to replace the whole thing
Trace666666 3 years ago
thank you a lot i thought i would never find a video like this
Trace666666 3 years ago
can you please make a vid about how to take the anolog thing out of your psp and how to get it back on??
goldmembers22 3 years ago
Thank you so much! You explained what i needed to know to the "t". The spring was what was giving me the most trouble. You saved me from buying a guide. Great video! Thanks again.
bertrios 3 years ago
lets go mets
sycosnot 3 years ago
I just did it with psp slim analog, but method for spring in this vid was just deforming it but I found another way. First I took the bottom plastic part put "the thing that you place nub on" and put spring on top of everything then I gently put top plastic part and used small and thick screwdriver to make spring fit there (I was gently pushing top part so it would immediately close when spring got to it's place). Inventing this idea took me a while but performing took ~2 mins :)
krzym1 3 years ago
hey dude, u know the silver component that goes under the guides? mine won't keep my analog stick stable, and it spins around when i play. help please?
baosing 3 years ago
thanx man, worked for me; dugg for Biohazard
drticool 3 years ago
HII Kevins FRiend
XoSiLlyBubbLes0x 3 years ago