I know this was part of some kind of training vid. Is there any info on what the post mortem revealed ? Looks like the imbalance caused by the missing rod catastrophically grenaded the crank.
MY question is, why did they NOT stop the dyno run when the engine started to vent steam/water and make odd noises ~ 0:27 mark? If they would've immediately shut it down they might've been able to at least save the block and some of the rods. Unless this was an already bad engine.
@ShottaScarface in my case it was a 73 Nova with an orange (Pontiac?) 307cid, but nothing came back through the firewall thankfully except some unforgettable smells like mechanical death, and no one got hurt
ur going to need a little more then a rebuild that would be like a fresh start, new block to start with and pretty dam near every thing else to go with it lol
CATASTROPHIC FAILURE! I'd say a con rod went first, jammed the piston up into the head or it fell, went sideways and got stuck and then the crank hit it and blew everything to pieces! Its nice though cuz all while that was happening, it removed the oil pan for you so you can easily access everything and rebuild it. lol
Reminds me when i test run a Volvo engine in dyno at a Volvo workshop one time. The cross joint shaft between the engine and the dyno snap in the dyno end. The shaft then hit the explosion cover inside and the bolts holding the cover snap so the cover was hit open. By that time i was standing by the engine with a steel plate over the turbo charger to stop the engine when i see the shaft together with the plate to the flywheel up in the roof rotating like crazy before it land in front of my feets
Scratches head, I must have the tach on the dyno off by a few thousand RPMs. Whoops. I'm jealous, wish I could get one to blow that violently, mwahahahahahaha.
you can see the engine taking load on the mounts and twist when whatever inside the dyno failed, followed by the grinding soung ( dyno grinding ) but when it locked down the engine started blowing pistons probally sheared the crank at the flywheel and still tryed to run as it was never shut down. that was a dyno failure that killed the engine
@meattube4u33 Hi, do you really think it was a turbo failure? At the 25 sec mark you hear a howl as something inside the motor seizes, because you see the motor torque over.I think the grinding you hear is what's left of aconnecting rod chewing, it's way through the bottom end. And then it all hits the fan!!!! IMO.
@felson99 after watching it again it looks like it did fail under load, you see a little lever deal drop on the dyno then the engine mounts take rotational load and it throws 3 rods/pistons before it finally chugs to a stop still trying to run on whats left, so the crank must have survived, the fact it blew 3 pistons suggests pre-ignition from too much turbo , like someone didnt hook up the vacume line to the turbo wast gate and it over boosted to pre ignition under heavy load
@meattube4u33 diesel engines are compression ignition engines they do not mix fuel with the air coming into the engine so it cant pre-ignition. The engine failed due to rpm because the fluid coupling for the engine dyno failed and let the engine red line under full load
this is a truck engine, and becouse of 6 cilinders and alot of torque is stil rotate even if it is blown. one piston was fail and the other five is stil pushing it. that why was so violent explosion.
I know this was part of some kind of training vid. Is there any info on what the post mortem revealed ? Looks like the imbalance caused by the missing rod catastrophically grenaded the crank.
twostrokeornill1 1 week ago
I got the krazy glue give me like five min
maddogg3415 2 weeks ago
Kinda seemed like a run away diesel
thejackal003 3 weeks ago
VTEC just kicked in yo!
killahhhh 1 month ago
I don't know if u know but..... UR DOING IT WRONG!!!!
Brennonicolini 1 month ago
That's one quick way to drain your oil. It's a little more costly but works!
TheColts1027 2 months ago
FORD's new model
bravo0404 2 months ago
That had to be loud, it even made the cameras ears ring.
wsouth1988 2 months ago
engines good to go!
petarjuric 2 months ago
Someone must of hit V-Tech
scottyBoland 3 months ago
by the way,who are those quarts of oil for over there in the corner?
jajaid6 3 months ago
great footage
tienshenhan86 3 months ago
Anybody got jb kwik
sharksauto 4 months ago
My guess is they wanted that to happen. We did it to a rotary to see how hard it would rev before it went bang
smirl83 5 months ago
@smirl83 its a test of how much rpm it can m.ake before breaking apart
djjannies 4 months ago
My next door neighbor had the same reaction when i told him that i done his wife
fls360 5 months ago 4
Another possible title, "Why people get fired"
yes333yes 5 months ago
JB WELD that back together everything will be just fine!
foundwaldo22 6 months ago
@foundwaldo22 Don't forget the duct tape also.
2014cwajts71 3 months ago
MY question is, why did they NOT stop the dyno run when the engine started to vent steam/water and make odd noises ~ 0:27 mark? If they would've immediately shut it down they might've been able to at least save the block and some of the rods. Unless this was an already bad engine.
VPR5703 6 months ago
The crank didn't seem that balanced when the first rod went through the side of the block
tappys15 6 months ago
and that is how you change the oil lol
1992steffan 6 months ago
Domestic junk
hm008vaj 6 months ago
now imagine if you were driving down the street and that happened...
ShottaScarface 6 months ago
@ShottaScarface in my case it was a 73 Nova with an orange (Pontiac?) 307cid, but nothing came back through the firewall thankfully except some unforgettable smells like mechanical death, and no one got hurt
SmileyGarrish 4 months ago
now thats wat u call self destruction :)
christoflamipie 6 months ago
lol big time fail you engine just took a big dump
danny112344 6 months ago
FAIL!!!!!!!
TheHell666yeah 7 months ago
Just show me the CARFAX?
DEATHMONKEY2167 7 months ago
Lucas makes something for that.
goodinsrt8 7 months ago
duck tape can fix that
shawnwade159 7 months ago
MADE IN CHINA
machfromcacolina 7 months ago
umm i think someone might want to fix that LOL
MrLolmaster1234 7 months ago
HOLY SHIT
vancamp4566 7 months ago
I love "flatline" sound after it blows.
audiodog2000 7 months ago
made in china
spiderchimp 7 months ago
That sucks really bad but funny at the same time lmao!!!
Anthonycunha100 7 months ago
its like ..... a robot had some explosive diarrhea then started to cry
sundayian1992 8 months ago
'Tis but a scratch.
mgrinshpon 8 months ago
The engine was alive till 0:37 - Beeeeeeeeeeeeeeeeeeeeeeeeeeeeeeep
MrDkTurtle 8 months ago
If that ain't a catastrophic failure, then I don't know what is!
dshmechanic 8 months ago
Didn't you see the oil light LOVE??
vinnie181 8 months ago 2
Comment removed
vinnie181 8 months ago
This has been flagged as spam show
that was funny as hell ... still laughing
pelong69 8 months ago
That was funny as hell ... still laughing
pelong69 8 months ago
HAHHAHahaha ! xd
hebreeuwers 8 months ago
did you blow the lower end im just learnin bout stuff ik a lot but im still young i can tare a motor down but can't diinoce a prob. by hearin
teca112233 8 months ago
wow that was cool
thepaul302 9 months ago
the engine flat lined lol
MrCstricklin 9 months ago
v tec kicked in!!!
GTRoberson1 9 months ago
ahh those pesky con rods getting in the way again
MrFlyboy400 9 months ago
wo dats awsome!!
nosjet1 9 months ago
looks like someone wanted to kill another guy. :D
herbierocks1 9 months ago
Looks like a Detroit??
icewater75074 9 months ago
well there's ur problem
poopalarge 9 months ago
looks like a cat engine
111hamish111 9 months ago
A little JB-weld will have it running in no time!
geonerd 9 months ago
This has been flagged as spam show
....back to the drawing board.....
deathbydirtmotocross 9 months ago
Chuck Norris wanted out..
kazzyk12 9 months ago 8
When the guy comes back for it put it all in a box and hand it to him.
NathansBackwoods 9 months ago 8
its ok people! that was just vtec that kicked in.
91cannibal 10 months ago
Looks like ALOT more parts came out of it,than went into it to me?
boruff68 10 months ago
It wont take it anymore captain....
mr1000rx 10 months ago
puts a whole new meaning to "throwing a rod" lol
theparrots15 10 months ago 2
@theparrots15 ...THROWING up Rods...makes a great boat anchor now.
blueflamealley 10 months ago
SHIT'S ON FIRE, YO
TheGeek1028 10 months ago
Have you driven a Ford lately?
BSnyd84 10 months ago
Holy shit it just fucking fell apart lol
bgump89 10 months ago
hahah it had a seizure
thedriver97 10 months ago
thats what happens when chuck norris is involved. lol
nejdriny 10 months ago
ouch charlie!
timwashere 10 months ago
Hey Pedro bring the mop!
yumyumsashimi 10 months ago
Mother fuuuuuuuuck
khankimaghi 10 months ago
I thought that was normal....
Well better take my car in now
mattyp2109 10 months ago
never ignore the check engine light
Jessmo90 11 months ago
probly a duramax
Fuckrap2 11 months ago
@Fuckrap2 jealousy is a bitch aint it? it was prolly a turd hemi or turd triton
02lb72500HD 11 months ago
@02lb72500HD whos tha bitch now?????????
Sickassfords 11 months ago
@Sickassfords it looks like u :)
02lb72500HD 11 months ago
WE GOT A FIRE ON AISLE 16. WE NEED TO GIVE IT A SNICKERS.
BOOMHEADSHOT214 11 months ago
IT GOT ON FIRE!!!!!!!!!!!!!!!!!!!!!
BOOMHEADSHOT214 11 months ago
wreszcie widziałem na żywo jak korba bokiem wychodzi fajnie
cebulcebula 11 months ago
Boom! Out go the lights!
jffrocks 11 months ago
a taki był ładny, amerykanski :)
TyBydlakuTy 1 year ago
HOLLY SHIT!
forde350 1 year ago
Must have been a ford. I have never seen a chevy or a mopar of all things do anything remotely close to that!
gtxkid08 1 year ago
Ooops i forgot to torgue the rod bolts,LOLOL
JardineRT1 1 year ago 21
@JardineRT1 Omg! Never let a teacher who thinks he knows everything tourqueyour lawnmower engine's carb, mine fell right off when it was running :(
MrTpengineer 8 months ago
OMG! It killed Kenny!
DistortedMannequin 1 year ago
@DistortedMannequin You bastards!
justduck1313 1 year ago
test past!!!
wouaga12 1 year ago
THATS EPIC!
bspurlock74 1 year ago
i think it broke
MYcareLEVELis1 1 year ago 3
keep clicking at 30 secs...looks like the engine is taking a shit lol
FPVXR8ED 1 year ago
nuthing that j@b weld and ducktape could not fic
ggknight18 1 year ago 2
Polish people can fix it!
trubin06 1 year ago 2
shit some one go get some duct tape we can fix this
badassouthernboy 1 year ago 7
@badassouthernboy lol u shit headed twit this is a great comment... i love youtubers u get a thumbs up
SilenttHilll 1 year ago
So THAT'S what a blown motor looks like!
YusakuJon3 1 year ago
its still good some 100mile an hour tape and alot of super glu will fix that
tobybrown75 1 year ago
Damn... somethin got hung... and with all that momentum.... POW!
KiroTheGreat 1 year ago
holy shit did that ever explode!
mamoochu 1 year ago
made in china ^^
jimmybal10 1 year ago
ur going to need a little more then a rebuild that would be like a fresh start, new block to start with and pretty dam near every thing else to go with it lol
Avalanche1530 1 year ago
CATASTROPHIC FAILURE! I'd say a con rod went first, jammed the piston up into the head or it fell, went sideways and got stuck and then the crank hit it and blew everything to pieces! Its nice though cuz all while that was happening, it removed the oil pan for you so you can easily access everything and rebuild it. lol
Free2Maim 1 year ago 2
omg they killed engine, you basterds !!!
sniegaviirs24 1 year ago 2
holy fuck
hamiltonodell1 1 year ago
Tha was scary!
kotsarikos13 1 year ago
Blew out the bottom of the block. Holy shit.
GrimReaperTheXIII 1 year ago
This is what happens when you play with a dodge/chrysler engine.
adb140275 1 year ago
oops.
scorpionsrt8 1 year ago
that motor was not made for nos they should have shut it down when it started making noise
12345678975738 1 year ago
Damn gm! what happend there?
chink311 1 year ago
Comment removed
mad4diesel 1 year ago
This has been flagged as spam show
@chink311 Mercedes OM 441A / II
mad4diesel 1 year ago
clean up aisle 4!
pivotboy63 1 year ago 20
that fell apart, probably a ford
chink311 1 year ago
@chink311
Whahahahaha yea probably it was a ford xD
opelcalibrarules 1 year ago
@chink311 it was a Gm vortech...
USFCARTWRIGHT 1 year ago
This has been flagged as spam show
the engine blew, the parts flew and we're through.
mustangjohhny 1 year ago
the engine blew, the parts flew and we're through
mustangjohhny 1 year ago
When it started sounding like a coffee grinder on N2O, that was probably the cue to shut it down and limit the damage, but no ... all the way, dude!
stereoroid 1 year ago
i think its a gm 8v71 deisel
turner593 1 year ago
Comment removed
mad4diesel 1 year ago
self destruct in 5.....
shawingz369 1 year ago
and thats just starting the engine
falcon96kickass 1 year ago
eehhhhhhh.....you just need some nitrous
faded2blak 1 year ago
what kind of motor is that?
unknown9515 1 year ago
@unknown9515 Mercedes OM 441A / II
poll123456 1 year ago
silnik sie zesral.............
salieri7005 1 year ago
well theres your problem
SuPrAmAd101 1 year ago
hey dad, my car made a funny sound!
billblue58 1 year ago 2
Reminds me when i test run a Volvo engine in dyno at a Volvo workshop one time. The cross joint shaft between the engine and the dyno snap in the dyno end. The shaft then hit the explosion cover inside and the bolts holding the cover snap so the cover was hit open. By that time i was standing by the engine with a steel plate over the turbo charger to stop the engine when i see the shaft together with the plate to the flywheel up in the roof rotating like crazy before it land in front of my feets
Volvoperkele 1 year ago
well thats not good
predator12XL 1 year ago
I think this is a shit american engine...
MrCosmin94 1 year ago
@MrCosmin94 what do you own?
sraldiris 1 year ago
@sraldiris European Ford Escort mk7 :)
MrCosmin94 1 year ago
@MrCosmin94 so your escort's engine is superior to a "shit american engine"?
sraldiris 1 year ago
@sraldiris hahaha its an escort...it isnt even superior to weed eater
faded2blak 1 year ago
@MrCosmin94 ts european....smart guy
hootieti 1 year ago
@hootieti 50 years maybe you'll engines similar to of our smart car
microaggancio 1 year ago
JB Weld .
arizonaboy77 1 year ago
a lil oil and it be fine lol
thedewpardo 1 year ago
wait... there supposed to do that rite? lol
derfboy15 1 year ago
Threw a rod
gwerner09 1 year ago
Scratches head, I must have the tach on the dyno off by a few thousand RPMs. Whoops. I'm jealous, wish I could get one to blow that violently, mwahahahahahaha.
9b8 1 year ago 2
This has been flagged as spam show
self destruct in 5
LtSplatter 1 year ago
0:30 LMAOOOOOO!!!!!!
xXxDANMANxXx 1 year ago
give it a kit kat
select899 1 year ago 40
holy shit you can just see the oil gush out everywhere.
NissanTy 1 year ago
Slick 50 will fix that.
magster65 1 year ago 2
you can see the engine taking load on the mounts and twist when whatever inside the dyno failed, followed by the grinding soung ( dyno grinding ) but when it locked down the engine started blowing pistons probally sheared the crank at the flywheel and still tryed to run as it was never shut down. that was a dyno failure that killed the engine
meattube4u33 1 year ago
@meattube4u33 Hi, do you really think it was a turbo failure? At the 25 sec mark you hear a howl as something inside the motor seizes, because you see the motor torque over.I think the grinding you hear is what's left of aconnecting rod chewing, it's way through the bottom end. And then it all hits the fan!!!! IMO.
felson99 1 year ago
@felson99 after watching it again it looks like it did fail under load, you see a little lever deal drop on the dyno then the engine mounts take rotational load and it throws 3 rods/pistons before it finally chugs to a stop still trying to run on whats left, so the crank must have survived, the fact it blew 3 pistons suggests pre-ignition from too much turbo , like someone didnt hook up the vacume line to the turbo wast gate and it over boosted to pre ignition under heavy load
meattube4u33 1 year ago
@meattube4u33 diesel engines are compression ignition engines they do not mix fuel with the air coming into the engine so it cant pre-ignition. The engine failed due to rpm because the fluid coupling for the engine dyno failed and let the engine red line under full load
kpshc707 1 year ago
um.. hyundai?
Fubu 1 year ago
out comes the piston haha
jesusaranda123 1 year ago
yeah, it's a dodge
IloveTUNERS 1 year ago
something out of a scary movie. shit looks nuts
mattdaman666 1 year ago
The guys testing this slowly turned their head mouth open, awe shocked, wtfg gentleman...
gasflame62 1 year ago
They didn't make engine mounts for nothing!!!
GGuerraFanSite 1 year ago
Super glue works ! You will have it running again in no time....
ylism 1 year ago 2
this is a truck engine, and becouse of 6 cilinders and alot of torque is stil rotate even if it is blown. one piston was fail and the other five is stil pushing it. that why was so violent explosion.
bernymonty22 1 year ago
I think this was a FIAT engine ;)
SyncMaster190T 1 year ago
That was awsome!
pfcrobinson 1 year ago 2
That was violent.
mgrande11 1 year ago
If that engine was just repaired, I would ask for your money back.
senorkaboom 1 year ago
Helvete!
500streamliner 1 year ago
Sounded like a jet engine landing @ 24 seconds... bearing siezing up or what?
dudeyourlame666 1 year ago
Box of Band-Aids...
rednecksumpthin 1 year ago
it will buff out....:)
MiKeDaStONeD 1 year ago
I've never seen an engine let go like that . "?"
thewelford 1 year ago
class A engine u has ther
ownd1000souls 1 year ago
just wick in a little CA
moter3d 1 year ago
just walk it off... ull b ok!
REBELsst 1 year ago
THAT is a perfect example of catastrophic failure. yeah
docstruthers 1 year ago
now, this is a real well documented engine explosion!
vochitoken 1 year ago