Seb Art Mig 29 High Alpha maneuvers and formation flying

[speedy409]

in the mean time upload some more vids of your tallent.. subscribed

[speedy409]

thrust vectoring is wicked. i love it on my sim but no way would i do hovers, flat spins and tumbles with a $600 plane lol. ill wait till vectoring gets cheaper and comes on all the ducted jets :D

[koss375]

Is it harder to fly that a similar parkjet? slowdown at 38 sec. ?

[warderseeker]

@koss375 yes, anything with TV is going to be harder to fly than a regular thrust plane. Yes 1/2 speed for the pass after 0:38.

[koss375]

@warderseeker but doesnt moving nozzles behind the propp count? like on the most foam figter jet models, is this one more sensitive?

[warderseeker]

@koss375 this is nozzles behind an impeller, in an EDF, are you talking about a mid plane prop plane with surfaces or what? All thrust vectored stuff is pretty sensitive, because of what you want it to do, takes a lot of travel. Most jet models aren't thrust vectored, ...yet lol

[koss375]

@warderseeker yes, I use to fly midpropp su 37 ( /watch?v=COasPN_lKRw ) and now I have a midpropp mig-29, where I have added and shaped out some styrofoam to make the nose and cookpit look real. It actually looks like yours and flies well) Nice skills you got, btw! I dont really dare getting and edf yet, since I crash too often.

[Kkhlam29]

any gyro used? what batteries? how long flight time?

nice video!

[warderseeker]

@Kkhlam29 I think one or two of the hovers I might've used it, but mostly now I don't bother. Too low I don't like to use it, as you have to fly it out of trouble LOL Using 4000mah nanotech 35-70C get about 4-5 minutes. 4 minutes if you're doing all 3D stuff, for sure thanks for watching, couple more videos of this up, and more to come

[TheBenWahBalls]

Great flying! this has to be one of the best videos ive seen. i noticed in one of the comments you mentioned a gyro. i have always wanted to know more about gyros on edf jets. is this something worth doing? also i have an f5e 70mm and want to know what the best mods to make to this would be while on a budget.

[RoninsRCRacing]

@TheBenWahBalls thanks a lot, I have a few videos of this jet up now. The gyro is only on there for the rudder, and for hovering. A few guys use gyros on their jets, but it's mostly for the nose gear steering I think, or on a 3D plane for cheating at hovering, with a gyro on the rudder. Basically once you are hovering, it takes care of that axis and all you have to do is control the elevator, throttle and ailerons instead.  I wouldn't worry about a gyro on any regular jet

[jauchiu]

Tom Cruise's worst nightmare. Top Gun gone wild.

[kenrom]

So Frickin Awesome!

[warderseeker]

@kenrom thanks dude, new video just uploaded of it

[kaw1997]

That is some good flyin' my friend!

[warderseeker]

@kaw1997 thanks a lot, new video just up with onboard cam on this

[flyboycub]

your title is high alpha maneuvers, and formation flying. how about high alpha formation flying...? just a thought!

[warderseeker]

@flyboycub haha...title says AND formation We do have two of them, but one is having some problems with electrical and one of the fans now. Hopefully we'll get two up at some point

[chiosex]

Wonderful video and flying, superb!

[warderseeker]

@chiosex thanks a lot, this one is a blast to fly

[PatBALEX]

Ronin you make flying the Mig look easy...What are you using for power?

[warderseeker]

@PatBALEX thanks a lot, but just looks easy. jet does fly very well, but doing this stuff is more like flying a heli, little more stressfull lol Right now I'm using some 4cell nanotechs from HK, 3300mah 35-70C Also one 25C Hyperion 3300 that does OK too, but both need to be more MAH. More like 4000. They suggest a $130 Thunder Power 4000mah LOL Dont' think I'll be doing that. Also trying a new "Gravity" 3300 30C, supposed to be a new label for Gens Ace or something

[pencon61]

well I am starting on my Mig 21 too so one of these days ..

[warderseeker]

@pencon61 awesome, can't wait to see it

[pencon61]

Great Flying Guys !

[warderseeker]

@pencon61 thanks man, some Russian formation action soon

[ptstptwi]

outstanding! nice flying. great plane!

[warderseeker]

@ptstptwi thanks for watching. Awesome flying jet

[roastedghost]

WOW.

[warderseeker]

@roastedghost thanks a lot for watching, more great clips of this one coming up

[phishintodd]

You guys have one the coolest and most active flying fields I've seen. Jealous!!! Keep up the vids... :o)

[warderseeker]

@phishintodd thanks a lot, we have a really great group of guys out there, that fly everything from big 50cc gassers or bigger, right down to Ultra Micro that are upgraded and almost go as fast LOL thanks for watching

[stevecraignet]

Ronin-- Mikoyan-Gurevich called, they want you to do their flight testing...

Love that "table-top launch" @ 2:50! Looked like a ski-jump cat shot!

You are THE MAN (but everybody tells you that...)!

[warderseeker]

@stevecraignet thanks a lot, hahaha...table top launch looks hilarious and works great. Love doing flight testing too, hahah I test more planes at the field than I probably have myself

[poppopscarvinshop]

Wow! We Need an Hour Long Version!

Fantastic!

Thank Y'all!

[warderseeker]

@poppopscarvinshop thanks a lot, these are so much fun to fly and watch. Soon there will be enough videos of this to make a playlist LOL

[Skydive4ever]

Me want, me wanna get one ;-) Awesome Idea for the launch, great use of a table :-)

[warderseeker]

@Skydive4ever go for it, you'll enjoy it for sure. thanks a lot, table worked great. needs afterburner leds on the nozzles now

[startazz]

Nice one Ronin what a sweet looking EDF man and i just knew you would get one of them bad boys ;-) top flying as always mate = thumbs up.

[warderseeker]

@startazz thanks Ian. Had to get one, and I hope to have the two of them up at once, soon. Best thrust vectoring EDF yet

[Trituri1337]

Awesome Video!

Now try to land the Habu on the Mig in a formation.

[warderseeker]

@Trituri1337 actually we had an uprigth Habu, land on an inverted one already, nice little touch and go off the belly side of my Habu. thanks for watching

[jose3945]

nice fliying, and impresionant looping at 3:16

[warderseeker]

@jose3945 thanks, flips around great, more to come

[spektrum33]

I always like watching the videos that you do as i find them intertaning and fun to watch ...

I also like the fact that you have an ironing board at the field so the wimen dont feel left out {0_o}

brave of what ?

[warderseeker]

@spektrum33 hahah...it's a table, but we do get the women to do some womens work at the field, just no clothes

Brave of what? what?? lol

[ograymare]

What's your flight time and what battery set up do you use

[warderseeker]

@ograymare 3-5 minutes depends on hovering or regular flight, 3300 35C batteries, but could go as high as 4200mah 4cell room for one battery only, supplying power to two 70mm fans

[pistonpoweruk]

amazing. great flights

[warderseeker]

@pistonpoweruk thanks for watching, more of this one soon

[beverke7]

amazing thrust vectoring performance, great flying skills man, this jet must be one of your favs already, look forward to more for sure AC/DC music is perfect for this baby

[warderseeker]

@beverke7 much appreciated, this thing is a riot for sure.  Loved the ac/dc, worked awesome at a few key points in the vid LOL

[vfrvtec]

fantastic flying as always guys. that was a good show.

[warderseeker]

@vfrvtec thanks a lot, awesome aircraft, really having fun with it

[randyneighbour]

great flying and very fun to watch.

[warderseeker]

@randyneighbour thanks man, I was hoping to catch some of the other one we have at the field as well, there will be two up at once soon, doing formation

[Don9aleh]

awesome flying, any website sells these jets?



[warderseeker]

@Don9aleh yes, hobby lobby is selling them, and a few more. Atlanta hobby maybe, also thunder power is the one doing them through Seb Art so they may sell them also.

[nishbrown]

I'll be impressed when you can land on the ramp/table.

.

.

X^D

[warderseeker]

@nishbrown haha...it was already talked about durin that flight. Don't tempt me.. from a really high alpha harrier, timed just right, could even keep the throttle on just a touch, to stop it from sliding down the table LMAO

[hotblume]

this looks like one nice jet! i saw the prototype model and was blown away by its performance. its thrust to weight ratio is amazing. I might end up buying one in the future

[warderseeker]

@hotblume thanks a lot, this thing is great, and the twin 70mm engines worked pretty well.  guys are still upgrading them though, for even more of a pull away from vertical, like in the hovers

[BryansFlyin]

That Mig is awesome. I think I have a new favorite EDF. Your flying was superb. Does it have retracts? Your vids get better and better bro. Thanks for making them. 10/10

[warderseeker]

@BryansFlyin Hey man, thanks a lot. No retracts on this one, saving weight for the 3D stunts. The table launch was hilarious, glad it worked so well. Some of the guys worry about throwing them for us, worries about screwing up the launch and dropping the jet, but the table worked great. Hand launches are really a breeze too, jumps out of the guys hands

[fraggem]

Great flying. Watching your videos of the mig 29 has changed the way i think about edfs!

[warderseeker]

@fraggem thanks a lot, this thing is amazing, if you want an EDF though, get a Habu. More to come of this, and the Habu formation team

[sheldonholy]

@fraggem If it was RCPowers you got any bad views of EDFs from, that man knows nothing.

[777muzzy]

I've heard a lot about this jet as of late. Looks great and seems to fly well, (you do a great job with it!). Are you happy with it?

[warderseeker]

@777muzzy thanks a lot, it does fly really well, but i've heard of some of the problems guys have had. I'm happy with it and it's performing as expected. We do know the esc's are marginal, so those will probably change out. Might even see about a 5cell in the future. soldering on one of the ones we got was not great though, cold solder connection had to be redone. The gyro does work well though, long as the gain and set points are right