Good work mate, same principle I used a couple of years ago but i used pvc pipe & heated it into a "U" shape & connect my terminals under water so water leaks could be detected easily rather than gas leaks. Next steps which i never got around to is 2 LPG tanks for gas collection with a pressure switch & a large enough water reservoir or a float switch included.
thank you this is it is awesome I have a underground bunker and this will make oxygen for the unit just separate the the gas and use the Oxygen in the bunker and exhaust the oHydrogen and this will work fine.
how can you separate hydrogen and oxygen via electrolysis without producing both gases? if your producing hydrogen what happens to the oxygen atoms left over in the cylinder? do they form some kind of solution where they happily float around, and if they do wouldn't they release upon killing the current to the system? if the system doesn't produce both isn't there an electrical imbalance with it only producing either?
i´m having some problems at the separation you need that the electrodes share the electrolyte right?if a use ClNa as electrolyte i´ll produce H2,O2, NaOH, Cl2 yeah? i found (wikipedia) that if you mix Cl and H2 they will explote any idea to how avoid it?
what if you took 3 4" tubes in a triad linked them at the bottom and had 1 pos and 2 neg cells with 13 stainless washers on threaded rod each how would that arrangement do at 12 volts and about 20 amps
well done ...ive watched dozens of these vidos...and yours makes more sence than all . my electro/maths knowledge is nill but otyers talk about 2 amps a cell for best results....so....if you coupled 5 or 6 of these up would you get optimum efficiency. PS.pure hydrogen appears to me to be the safest option than HHO..thanks for sharing...good luck
Thanks Bob. Funny, years ago I pursued a BS in Fine Arts yet as it turned out I'm involved in engineering and architecture as a professional career.
;)
d3adp001, I haven't forgot your request but I thought I'd skip measurements for this design because of a larger one I have in the works as I type this message. I will take all the measurements you asked for with the new design in the next video or two. Please, be a bit more patient with me.
for a baseline of information is there any possibility that you could measure the volts amps, and total volume output per minute? I would really appreciate the information if you have the time.
wait so thats not brown's gas anymore but pure hydrogen coming out of that right side?
ZebbMassiv 6 months ago
Good work mate, same principle I used a couple of years ago but i used pvc pipe & heated it into a "U" shape & connect my terminals under water so water leaks could be detected easily rather than gas leaks. Next steps which i never got around to is 2 LPG tanks for gas collection with a pressure switch & a large enough water reservoir or a float switch included.
godj007 8 months ago
how do you vent the separated gases.
Tonyzzz7 11 months ago
thank you this is it is awesome I have a underground bunker and this will make oxygen for the unit just separate the the gas and use the Oxygen in the bunker and exhaust the oHydrogen and this will work fine.
serger2010 1 year ago
@myhydrogencar i think i have one put hho in a container by itself and it will do the rest, hydrogen is less dense than oxygen
njsusmc1 1 year ago
how can you separate hydrogen and oxygen via electrolysis without producing both gases? if your producing hydrogen what happens to the oxygen atoms left over in the cylinder? do they form some kind of solution where they happily float around, and if they do wouldn't they release upon killing the current to the system? if the system doesn't produce both isn't there an electrical imbalance with it only producing either?
mrcollins100 2 years ago
i´m having some problems at the separation you need that the electrodes share the electrolyte right?if a use ClNa as electrolyte i´ll produce H2,O2, NaOH, Cl2 yeah? i found (wikipedia) that if you mix Cl and H2 they will explote any idea to how avoid it?
RaOpNa777 3 years ago
Speak, Lassie!!! SPEAK!!! lol, j/k ;)
PimpXXXGuitarist 3 years ago
what if you took 3 4" tubes in a triad linked them at the bottom and had 1 pos and 2 neg cells with 13 stainless washers on threaded rod each how would that arrangement do at 12 volts and about 20 amps
lprulez 3 years ago
well done ...ive watched dozens of these vidos...and yours makes more sence than all . my electro/maths knowledge is nill but otyers talk about 2 amps a cell for best results....so....if you coupled 5 or 6 of these up would you get optimum efficiency. PS.pure hydrogen appears to me to be the safest option than HHO..thanks for sharing...good luck
limestick 3 years ago
Thanks Bob. Funny, years ago I pursued a BS in Fine Arts yet as it turned out I'm involved in engineering and architecture as a professional career.
;)
d3adp001, I haven't forgot your request but I thought I'd skip measurements for this design because of a larger one I have in the works as I type this message. I will take all the measurements you asked for with the new design in the next video or two. Please, be a bit more patient with me.
Thanks guys!
cjpeaceful1 3 years ago
You make beautiful art of your experiments.
Bob Campbell
HHO4gas 3 years ago
I'll take those measurements as soon as the glue dries around the hosing fittings I attached to the cell ;)
cjpeaceful1 3 years ago
for a baseline of information is there any possibility that you could measure the volts amps, and total volume output per minute? I would really appreciate the information if you have the time.
d3adp001 3 years ago