Holy shit bro. I also have a Type X but it looks like yours is 50 times louder than mine. I know part of the reason why is because I have a really shitty sealed box, but I also have pdx1.1000 pushing it and it doesn't seem very loud. Im thinking about buying a new box that 3.0 cubes at 35hz but I'm not sure if it would make much difference. I have a vid of my sub on my page if you wanna see. Can someone help me?
One of the best recorded audio i've seen so far here on youtube. most of the "sub" videos i've seen sound like crap. too-too- much bass!! either ur camera is very good or ur system is a BEAST. Doubt its the camera. :)I feel like i'm actually sitting in your car watching this vid. nice
@doua86 Thank you very much and I know exactly what you mean on the crappy audio videos. I tried to make mine a little more "high quality" instead of just a shaky camera making camera noise and filming how hard the mirror shakes. Oh, and it's just your "middle of the road" Sony Handycam or whatever (not even HD). I appreciate the compliment though!
@doua86 My system probably has one of the cleanest bass sounds that I've ever heard inside a car, and it sounds like shit on video... the more power, the less the mic will cooperate simple as that. I got 2 alpine type Xs powered by a 4,000 watt amp... Forget the mirrors, my windshield shakes... He doesn't push that much power, thus he is able to preserve the sound quality
It's your alternator bro, I have a ranger too,, I have two kicker L5 2ohm subs in a ported box hooked up to a performance teknique 3000 watt amp,, and my truck dies a little too, replace your alternator to a 250watt n everything will be all good bruh
I also have the pro60se. is there much difference between placing them as coaxials or components? I currently have them as components but I want to place them like yours in a kick panel too. What do you recommend?
@SteveFrench306 No that's the correct idle RPM. Either you were reading the gauge wrong, or something was wrong with your truck. All 4.3L in the S10's and Blazers idled at 550-600 RPM when warm.
@iast8er k well i dunno its was a 96 so it was a little bit older and mine had CAI and straight piped and i think the guy before me chipped it but nice system man
hey man nice pick for the type x top of the line for alpine i like the custom bostons in the kickpannel best spot for equal sound to the ears just curious what kind of amp you running i just got a type x single 10 and put it in a home built bandpass that i vented on both ends of the box in the trunk like total 2.8 cubes on a rf1500.1 at 2 ohms getting around 1000 -1100 rms it
@fredtflail Well I had it like that for about a year, and then I now have 8" Ranbow midbass in the same location, except it's recessed in toward the fender more. I appreciate your concern though.
hey bro i gotta say that shit is nice i love your set up. but how many watts is your amp. but i got a question do you think my jl audio w6 will hit good ass you type x? let me kno what you think..... good video
@iast8er lol who cares bout fuckin image dynamics those subs are fuckin gay too! especially if u have them in the same enclosure that u had these in! you gay and cheap u fuckin ghetto cheap skate!
@iast8er wat a dumbass the whole point is that ur subs are fuckin gay! and it doesnt matter what enclosure u put them in! they are still guna be weak. UR A DUMB IDIOT and a fuckin cheap asshole, fuck ur cheap subs and fuck u too u fag
@TylernolXtraStrength brand new i can get em for 320... not used.. still packaged and everything... from an authorized retailer shop... you just must be lookin in all the wrong places for em.. or going by the retail on their site...
@MW2VideosCenter Type X in so many ways... if you want straight SPL get the Fi, but the sound quality of the Type X is so much better (in the right box), and it still gives plenty of SPL
@MW2VideosCenter SPL means Sound Pressure Level... in simplest terms, loudness... SPL subs lack the quality that a specifically built SQ driver (sound quality) offers (think type X, JL w3 or w6), but is able to deliver higher DBs and generally, more output... that isn't always true, but the Type X was built for SQ, yet people see the 1000rms and think its an SPL competition sub... most people don't know what quality is..thats why you see these 5 cubic foot boxes (vomit)...
@CoupeDeville23 Thx alot man that helped alot :). But if you take a Fi BL its gonna be lounder than the type X but the SQ will be better on type X? and does the Fi BL have a good SQ though?
@MW2VideosCenter Fi is for people who want the loudest bass possible, and are willing to sacrifice sound quality all together... I'm not knocking the brand, I'm just saying that if your goal is to be like Steve Meade, or you want to enter comps, go for Fi... but the sound quality on a type x or any JL sub will be FAR better, and still will deliver plenty of SPL.....
@donbehatin mines got a throttle body spacer, flomaster 40s an a air rade cold air intake and a superchip and mine idles at 900-1100 and thats in a 04 zr2(s10)
@imupabove I couldn't tell ya. I don't see them for sale used very often, in fact I've only seen 2 other MD3D's used ever, and they were the newer versions.
Yeah I already know this, I'm just curious as to why someone would be stupid enough to say something like that...... just to let you guys know, I've upgraded to a 10" IDMAX now, this Type X has been sold for a couple months now.
Thanks. I used wood putty to fill in the screw holes, and body filler to fill in the seams where the pieces of wood come together. After that my arm fell off from the amount of sanding I had to do, then I used a product called Slick Sand, it's a polyester primer that covers up all imperfections and also acts as a primer. Then I just threw on the red top coat.
thank ya i might try to do it to my box it would be worse than yours plus its a truck box i went and checked out ur build thread and damnnnn dude u have had a shit load of mids it that thing i might be doin the kick panles in my truck is it worth the work?
Yeah I've been pretty picky with my mids lately, but I think I've finally come to a stopping point (for now).
The kicks are definitely worth while. Getting the speaker out of the door is the best thing you can do IMO. Once you do that there aren't 50 rattles coming from your cheap door panel anymore.
im the same way i got a 90 gmc c1500 so there in the dash but i got 2000 watts on 2 12s 700 watts rms and even with all 4 4x6s and 2 sets of tweeters aint loud enuff
I realize, I just hate it when people are like "dude come check out my system! plz rate and comment!" it's so annoying and it makes you sound like some little kid who didn't get enough attention as a kid.
Sorry to sound harsh but I hope you know where I'm coming from.
nice i got a 2002 chevy zr2 with one RE AUDIO SE series subs 2 channel with a us amps 200 watt amp with a xplod head unit its a beast for one 12. it rocks my seat pretty well
get a none ported box it will have better punch , bass,and better spring effect and ur less likely to burn or mess up a sub and get a capasitior to help get better bass response i got 2 10's in 700watt amp and a capasitior and damn it hits hard !!!!!
u do know the capacitors are proven to barely work, they hold less juice then your battery does. and it does nothing to help bass response. All it does is so it helps your battery whenever your sub needs more power
@xm8563 Very true but would like to add it doesnt even help your battery as its another thing added to the list that your battery has to give juice to. Alts are there to hold a charge for when the sub needs it on big lows and it takes that charge from where??? :)
I've since upgraded to an Alpine CDA-9887, 4" Alpine Type X comps in the dash, Peerless SLS 6.5" midbass for the new kicks and a PDX 2.150 for the Type X comps.
No worries. It's actually a little bit less than 1.6 cubes. During the last minute of the box build I decided to add 4 rods of dowel to the inside for bracing, so it's 1.6 cubes minus the volume of those 4 dowel rods.
Yeah it's 1.6 cubes alright. It's got an "accordion" style port, so it isn't an "L". The depth of the sub and my restricted height dimension didn't allow me to have the port go across the bottom side of the box because it would hit the magnet due to the width of the port.
Well first, amazing build thread. Thats a lot A LOT OF MONEY!!!!!!!!!
Anyways, my system is a puppy with yours next to it. I might become a member and see what the people in that forum say about it. Im happy with it though, I just wish it was louder.
Not at all. If you have too big of a box, you'll loose the "spring effect" that a box has on a subwoofer. You'll need to find that "perfect medium" that will appeal most to you.
Well my port is 14 5/8 height and 1 3/4 width. I dont know the depth.
I dont even know what the box is tuned to lol I just replaced my CVR to this and Im not dissapointed, but the box is giving my sub somewhat a hard time
Heh, I dunno I'm just good? lol I'm jp. I dunno what to say, just take your time, save up your money and don't buy crappy equipment. Build yourself a good install to go along with the good equipment and you'll end up with a smile on your face 9 times out of 10.
I'll post up a link of my build thread in the description so you can see step-by-step how it was built.
This has been flagged as spam show
@iast8er dude im about to pick up 2 type x 10s for my zr2 with a alpine 2000w amp shitts crazyyyyyy
zacmandune 3 weeks ago
@iast8er dude im about to pick up 2 type x 10s for my zr2 with a alpine 2000w amp shitts crazyyyyyy
zacmandune 3 weeks ago
This has been flagged as spam show
would a rockford forsgate R500-1 amp with 511 rms watt power up this amp????
x5sTaR1 1 month ago
whatd you finish the box with? looks way better than carpet
stricken212 2 months ago
very nice system! :D
levi50000 2 months ago
Holy shit bro. I also have a Type X but it looks like yours is 50 times louder than mine. I know part of the reason why is because I have a really shitty sealed box, but I also have pdx1.1000 pushing it and it doesn't seem very loud. Im thinking about buying a new box that 3.0 cubes at 35hz but I'm not sure if it would make much difference. I have a vid of my sub on my page if you wanna see. Can someone help me?
DaBeSToFIRaWnESS 3 months ago
One of the best recorded audio i've seen so far here on youtube. most of the "sub" videos i've seen sound like crap. too-too- much bass!! either ur camera is very good or ur system is a BEAST. Doubt its the camera. :)I feel like i'm actually sitting in your car watching this vid. nice
doua86 3 months ago
@doua86 Thank you very much and I know exactly what you mean on the crappy audio videos. I tried to make mine a little more "high quality" instead of just a shaky camera making camera noise and filming how hard the mirror shakes. Oh, and it's just your "middle of the road" Sony Handycam or whatever (not even HD). I appreciate the compliment though!
iast8er 3 months ago
@doua86 My system probably has one of the cleanest bass sounds that I've ever heard inside a car, and it sounds like shit on video... the more power, the less the mic will cooperate simple as that. I got 2 alpine type Xs powered by a 4,000 watt amp... Forget the mirrors, my windshield shakes... He doesn't push that much power, thus he is able to preserve the sound quality
ironbull2003 1 month ago
u know when the shits hardcore when u cant even hear the lyrics -_- lmfao.
timah663 4 months ago
nicee job and box sounds so fuckin clear...and thats off the camera nice!
MrNielsen13 5 months ago
type x ftw!
mc808100 7 months ago
i have a 12" jbl in a probox and im lookin to get an alpine. how many watts does it drawl
9DTS9 8 months ago
It's your alternator bro, I have a ranger too,, I have two kicker L5 2ohm subs in a ported box hooked up to a performance teknique 3000 watt amp,, and my truck dies a little too, replace your alternator to a 250watt n everything will be all good bruh
gallga35 8 months ago
@SteveFrench306 just curious why would the sub make the truck idle lower, cause my ranger does that sometimes when i have a large current draw goin?
blazepurple0420 9 months ago
dude that box is nice
lpngcf420 10 months ago
I also have the pro60se. is there much difference between placing them as coaxials or components? I currently have them as components but I want to place them like yours in a kick panel too. What do you recommend?
Blackdog747 11 months ago
is your truck reving low cause the sub cause i use to have a zr2 with the 4.3 H.O. and it was always at 1100rpm
SteveFrench306 1 year ago
@SteveFrench306 No that's the correct idle RPM. Either you were reading the gauge wrong, or something was wrong with your truck. All 4.3L in the S10's and Blazers idled at 550-600 RPM when warm.
iast8er 1 year ago
@iast8er k well i dunno its was a 96 so it was a little bit older and mine had CAI and straight piped and i think the guy before me chipped it but nice system man
SteveFrench306 1 year ago
@iast8er ya, i think a lot of chevys do that... just a guess based on my old equinox
mikebingham34 4 months ago
wow that is a NICE box. did you make it?
VirginiasLoudest 1 year ago
@VirginiasLoudest Thank you, and yes I did.
iast8er 1 year ago
@iast8er ah i see you have a thread to your build, great system bro
VirginiasLoudest 1 year ago
lol usually subwoofers sound nicer inside the car, not outside :)
topheryoyo911 1 year ago
hey man nice pick for the type x top of the line for alpine i like the custom bostons in the kickpannel best spot for equal sound to the ears just curious what kind of amp you running i just got a type x single 10 and put it in a home built bandpass that i vented on both ends of the box in the trunk like total 2.8 cubes on a rf1500.1 at 2 ohms getting around 1000 -1100 rms it
cinderbella3 1 year ago
next time choose a proper tune dude :)
edvinastox 1 year ago
Thats a horrible spot for a 6 1/2, not sound wise, just not very safe for the speaker.
fredtflail 1 year ago 6
@fredtflail Well I had it like that for about a year, and then I now have 8" Ranbow midbass in the same location, except it's recessed in toward the fender more. I appreciate your concern though.
iast8er 1 year ago
@fredtflail in the kick panel? it's fine the truck has a slushbox not a manual
type X - the only alpine worth talking about
miniimoto95 5 months ago
nice sub and car paint
27429 1 year ago
@27429 Thanks.
iast8er 1 year ago
nice box
pbspencer 1 year ago
where on earth did you get those kick panels????
blazinloud 1 year ago
@blazinloud I made them out of fiberglass.
iast8er 1 year ago
@iast8er nice work bro..
RJKkrzy33 1 year ago
Its Low Not Get Low
alonehihi 1 year ago
@alonehihi Oh ok, thanks for the correction.
iast8er 1 year ago
@iast8er Just Doin My Job , Oh , And If You Want Some Bass Song Ask Me Too
alonehihi 1 year ago
Beautiful box. Did u make it youself?
trinigangsta2592 1 year ago
@trinigangsta2592 Thanks. Yeah I did. Every last detail.
iast8er 1 year ago
@iast8er you did a dreat job on the kick panels
jmecrg 1 year ago
@jmecrg Thank you.
iast8er 1 year ago
@iast8er louder than 2 12 type s do you think
FIcaraudioBTL 1 year ago
@FIcaraudioBTL In the right box, yeah.
iast8er 1 year ago
Nice... I really like the kick panel components... I've been looking at those Q logic kick panel forms
CoupeDeville23 1 year ago
I hit like 13.2v on heavy songs... :)
USMCfosho 1 year ago
LOLOLOLOL at voltage :)
sobe3yourself 1 year ago
@sobe3yourself Uh, what? It stays at 14.4v throughout the entire video.
iast8er 1 year ago
@iast8er uhhhh haha take that back, for some reason i thought i saw a 3 instead of a 9 as the first number. good video, i used to love my type x.
just put it back my car today actually
sobe3yourself 1 year ago
@iast8er damn my kenwwod is pulling on my altanator what do you have i only have a 800 ca battery with a 2 farad cap let me know plz
MrAcuralvr 1 year ago
@MrAcuralvr AD244 alternator from an '03 Suburban. Check out the sticky on s10forum in the Sound and Security section.
iast8er 1 year ago
@iast8er ok thanks man
MrAcuralvr 1 year ago
hey bro i gotta say that shit is nice i love your set up. but how many watts is your amp. but i got a question do you think my jl audio w6 will hit good ass you type x? let me kno what you think..... good video
sl1ck213 1 year ago
SICK SETUP you bought the best shit
GEARHEADGUY92 1 year ago
i like it
34celticpride 1 year ago
hey bro tharts a sick ass set up. what kind of amp is thst and how many watts are you runing?
sl1ck213 1 year ago
better hope some dumbass see your speaker on the floor and not bend the grill in
icool247 1 year ago
@icool247 I've got 8" Rainbow W200's in there now with grilles from parts express. I really need to update my channel lol
iast8er 1 year ago
@adamb886 your a fuckin fagget guy!
MrLIFEISTOOSHORT 1 year ago
clean setup bro..
soxonmyfeet 1 year ago
@soxonmyfeet Thanks.
iast8er 1 year ago
fuck these subs fuckin suck ass! get some memphis audio or fi btl's!
MrLIFEISTOOSHORT 1 year ago
@MrLIFEISTOOSHORT I've got a 10" IDMAX in there now you retard.
iast8er 1 year ago 2
@iast8er lol who cares bout fuckin image dynamics those subs are fuckin gay too! especially if u have them in the same enclosure that u had these in! you gay and cheap u fuckin ghetto cheap skate!
MrLIFEISTOOSHORT 1 year ago
@MrLIFEISTOOSHORT It's a completely different enclose you retard. Same design yes, but different dimensions with a different sub.
Why do people bitch about this stuff on YouTube? It's not like I'm going to change my setup or anything lol.
iast8er 1 year ago
@iast8er wat a dumbass the whole point is that ur subs are fuckin gay! and it doesnt matter what enclosure u put them in! they are still guna be weak. UR A DUMB IDIOT and a fuckin cheap asshole, fuck ur cheap subs and fuck u too u fag
MrLIFEISTOOSHORT 1 year ago
@MrLIFEISTOOSHORT wtf r u talking about cheap one 10 inch type x runs around 400 dollars, shut ur mouth
TylernolXtraStrength 1 year ago
@TylernolXtraStrength u think 400dollars is alot? LOL
MrLIFEISTOOSHORT 1 year ago
@MrLIFEISTOOSHORT ur a dumbass
TylernolXtraStrength 1 year ago
@TylernolXtraStrength not really.. you can get type x 12's for under 300 a piece re re
ALaMOTOx45 1 year ago
@ALaMOTOx45 ya crap used ones id love to see u get new ones for that price or even old ones that work well for that, once again ur a dumbass
TylernolXtraStrength 1 year ago
@TylernolXtraStrength brand new i can get em for 320... not used.. still packaged and everything... from an authorized retailer shop... you just must be lookin in all the wrong places for em.. or going by the retail on their site...
ALaMOTOx45 1 year ago
@ALaMOTOx45 i probably am then
TylernolXtraStrength 1 year ago
@MrLIFEISTOOSHORT Trolling
calvinblinkee 1 year ago
@MrLIFEISTOOSHORT sigh *facepalm*
iast8er 1 year ago
@iast8er dont worry that guy is only jealous cause he doesnt have a type x
kosamega 1 year ago
@kosamega Nah I don't sweat it. He's just wasting his time posting here.
iast8er 1 year ago
@MrLIFEISTOOSHORT Alpine type x's suck? You must be fucking high you stupid retard. You know shit about car audio you homo poser!
BODYGETTA 1 year ago
@BODYGETTA how many db's are those pieces of shit hitting? bet they aint even hitting 120db making them weak as fuck fuckin fagget
MrLIFEISTOOSHORT 1 year ago
@MrLIFEISTOOSHORT have you even ever heard an x? dumb ass
csmccarty 1 year ago
blast.
What camera are you using? :)
Tominsh21 1 year ago
@Tominsh21 Uhh, I don't even know to be honest with ya. The camera is about 2 years old, just your average line Sony Handicam, no HD or nothing.
iast8er 1 year ago
i would put my 12" audibahn immortal against it.
kittybath 1 year ago
@kittybath You'd have to go find the guy that bought it from me then.
iast8er 1 year ago
@kittybath
Lol high hopes huh? LMAO
Villeza1 1 year ago
I really like your kick panels, nice job with those
michaelmorr11 1 year ago
@michaelmorr11 Thank you.
iast8er 1 year ago
the song please?
edyloro 1 year ago
@edyloro Really? It's Let Low by Flo-Rida.
iast8er 1 year ago
dam that must pound in that truck cuz its so little
34celticpride 1 year ago
Whats better, one Fi BTL or 2 Alpine type x? thx
MW2VideosCenter 1 year ago
@MW2VideosCenter Type X in so many ways... if you want straight SPL get the Fi, but the sound quality of the Type X is so much better (in the right box), and it still gives plenty of SPL
CoupeDeville23 1 year ago
@CoupeDeville23 Okk But what you mean by SPL?? Thx
MW2VideosCenter 1 year ago
@MW2VideosCenter SPL means Sound Pressure Level... in simplest terms, loudness... SPL subs lack the quality that a specifically built SQ driver (sound quality) offers (think type X, JL w3 or w6), but is able to deliver higher DBs and generally, more output... that isn't always true, but the Type X was built for SQ, yet people see the 1000rms and think its an SPL competition sub... most people don't know what quality is..thats why you see these 5 cubic foot boxes (vomit)...
CoupeDeville23 1 year ago
@CoupeDeville23 Thx alot man that helped alot :). But if you take a Fi BL its gonna be lounder than the type X but the SQ will be better on type X? and does the Fi BL have a good SQ though?
MW2VideosCenter 1 year ago
@MW2VideosCenter Fi is for people who want the loudest bass possible, and are willing to sacrifice sound quality all together... I'm not knocking the brand, I'm just saying that if your goal is to be like Steve Meade, or you want to enter comps, go for Fi... but the sound quality on a type x or any JL sub will be FAR better, and still will deliver plenty of SPL.....
CoupeDeville23 1 year ago
lol thanks man
rolo869 1 year ago
amp? watts?
rolo869 1 year ago
@rolo869 US Amps Merlin MD3D ran @ 2ohms for 1200w rms. Read the description next time.
iast8er 1 year ago
500 rpm?
autostuniados 1 year ago
@autostuniados That's the idle speed of the engine, roughtly between 500-600 RPM.
iast8er 1 year ago
@iast8er lol! very low!
autostuniados 1 year ago
@iast8er 4.3s idle at 650.
donbehatin 1 year ago
@donbehatin mines got a throttle body spacer, flomaster 40s an a air rade cold air intake and a superchip and mine idles at 900-1100 and thats in a 04 zr2(s10)
306Finest306 1 year ago
@306Finest306 They stopped making S10 Zr2's in 2003. Interesting how you have a 2004 S10 Zr2.
iast8er 1 year ago
@iast8er oh sorry there douche bag its a 03 thanks for correcting me!
306Finest306 1 year ago
Nice box
pspgamer90 1 year ago
@pspgamer90 Thanks.
iast8er 1 year ago
what about the MD2D? performs great you think also?
imupabove 1 year ago
@imupabove Yep. Can't go wrong with US Amps.
iast8er 1 year ago
@iast8er how much you think MD2D go for new and used?
imupabove 1 year ago
@imupabove I couldn't tell ya. I don't see them for sale used very often, in fact I've only seen 2 other MD3D's used ever, and they were the newer versions.
iast8er 1 year ago
us amps md3d.. is that a good amp? puts out good clean power?
imupabove 1 year ago
@imupabove Most definitely. One of the few companies that are still made here in the USA. I'll probably never get another sub amp.
iast8er 1 year ago
Very nice box...good job. Your sub can take about 5-600 more watts tho... Stronger amp is needed...
TimCurry04 2 years ago
Thanks. Why do you say my sub can take 5-600 more watts?
iast8er 2 years ago
no it can't keep it how it is.
toxicsask 2 years ago
Yeah I already know this, I'm just curious as to why someone would be stupid enough to say something like that...... just to let you guys know, I've upgraded to a 10" IDMAX now, this Type X has been sold for a couple months now.
iast8er 2 years ago
@TimCurry04 Its a 2ohm does need that much power
itzstefancudi 2 years ago
wow.. very nice system! :D
shak541 2 years ago
nice system sounds good as hell how did u get ur box to look so clean? like i dont see any seams or anything
billybadazz11 2 years ago
Thanks. I used wood putty to fill in the screw holes, and body filler to fill in the seams where the pieces of wood come together. After that my arm fell off from the amount of sanding I had to do, then I used a product called Slick Sand, it's a polyester primer that covers up all imperfections and also acts as a primer. Then I just threw on the red top coat.
iast8er 2 years ago
thank ya i might try to do it to my box it would be worse than yours plus its a truck box i went and checked out ur build thread and damnnnn dude u have had a shit load of mids it that thing i might be doin the kick panles in my truck is it worth the work?
billybadazz11 2 years ago
Yeah I've been pretty picky with my mids lately, but I think I've finally come to a stopping point (for now).
The kicks are definitely worth while. Getting the speaker out of the door is the best thing you can do IMO. Once you do that there aren't 50 rattles coming from your cheap door panel anymore.
iast8er 2 years ago
im the same way i got a 90 gmc c1500 so there in the dash but i got 2000 watts on 2 12s 700 watts rms and even with all 4 4x6s and 2 sets of tweeters aint loud enuff
billybadazz11 2 years ago
how do you get the speakers out of the door? i hate those rattles and i have a honda civic 2001 if that matters
travis18haney 2 years ago
you have to take off the whole door panel and then unscrew em
306Finest306 2 years ago
Thats painted red? damn it looks like you coverd it in red vinal haha.....nice box. I have a x 12 too an that bitch beats the block down
GrissomA1 2 years ago
alpine cde-102 deck i have that one i love it
diller1994 2 years ago
huh? No, that's a CDA-9855. I'm not a fan of the new Alpine headunits other than the 9887, which I've upgraded to since this video.
iast8er 2 years ago
nice box ! check out my set up !
toucandan8989 2 years ago
No! Go have your mom check out your setup! You'll probably get more "props" that way!
iast8er 2 years ago
haha wow i wasnt even talkin shit ?
toucandan8989 2 years ago
I realize, I just hate it when people are like "dude come check out my system! plz rate and comment!" it's so annoying and it makes you sound like some little kid who didn't get enough attention as a kid.
Sorry to sound harsh but I hope you know where I'm coming from.
iast8er 2 years ago
o i c haha ya ill admit that im 1 of those poeple that try to get a lot of views lol
toucandan8989 2 years ago
thing dumps dude, i like that box too.
gacylikesbrutal 2 years ago
nice i got a 2002 chevy zr2 with one RE AUDIO SE series subs 2 channel with a us amps 200 watt amp with a xplod head unit its a beast for one 12. it rocks my seat pretty well
badassszr2 2 years ago
get a none ported box it will have better punch , bass,and better spring effect and ur less likely to burn or mess up a sub and get a capasitior to help get better bass response i got 2 10's in 700watt amp and a capasitior and damn it hits hard !!!!!
InuyashaWindScar1994 2 years ago
lol...... sure
iast8er 2 years ago
u do know the capacitors are proven to barely work, they hold less juice then your battery does. and it does nothing to help bass response. All it does is so it helps your battery whenever your sub needs more power
xm8563 2 years ago 2
@xm8563 well said capacitors dont do much of nothing
igothoes88 2 years ago
@xm8563 Very true but would like to add it doesnt even help your battery as its another thing added to the list that your battery has to give juice to. Alts are there to hold a charge for when the sub needs it on big lows and it takes that charge from where??? :)
dizzyblade12345 2 years ago
man thats nice but its a back firing sub would hit way harder if the box was the other way
presto234 2 years ago
Um, what? It's definitely up firing...
iast8er 2 years ago
yeah man but its a back firing sub
presto234 2 years ago
What do you mean by "back firing sub"? I don't understand.
iast8er 2 years ago
think he wants u to face the sub towards the back instead of the roof lol
badassbikerst 2 years ago
in a box it fires backwards would get 2 times the bass if yours sub was pointing to the back
presto234 2 years ago
Its a truck, they are different than cars. better facing forward and slightly slanted up.
macdaddyd1 2 years ago
it should not be facing up though because you will get sound wave cancellation.
spartanktm 2 years ago
not 2x bass but 3 db's louder at max
bamaboyfourlife 2 years ago
only thing your missing on the truck is a snugtop ;)
pwned209 2 years ago
I've since upgraded to an Alpine CDA-9887, 4" Alpine Type X comps in the dash, Peerless SLS 6.5" midbass for the new kicks and a PDX 2.150 for the Type X comps.
iast8er 2 years ago
Hey man
You need to tell me what is the size of the box, and what you have your low pass filter on as well as your sub sonic filter.
slim142 2 years ago
I need to?
1.6 cubes, lpf is at 80hz, subsonic is at ~27hz
iast8er 2 years ago
I shoulda have wrote gotta. but anyways nothing offensive here.
Are you sure you are on 1.6 cubes? I have a 1.75 and your red box looks a lot bigger.
slim142 2 years ago
No worries. It's actually a little bit less than 1.6 cubes. During the last minute of the box build I decided to add 4 rods of dowel to the inside for bracing, so it's 1.6 cubes minus the volume of those 4 dowel rods.
Yeah it's 1.6 cubes alright. It's got an "accordion" style port, so it isn't an "L". The depth of the sub and my restricted height dimension didn't allow me to have the port go across the bottom side of the box because it would hit the magnet due to the width of the port.
iast8er 2 years ago
If you go to my build thread, you'll see the box and how the port is laid out.
iast8er 2 years ago
Well first, amazing build thread. Thats a lot A LOT OF MONEY!!!!!!!!!
Anyways, my system is a puppy with yours next to it. I might become a member and see what the people in that forum say about it. Im happy with it though, I just wish it was louder.
Is it true the bigger the box, the better?
slim142 2 years ago
Thanks.
Is it true the bigger the box, the better?
Not at all. If you have too big of a box, you'll loose the "spring effect" that a box has on a subwoofer. You'll need to find that "perfect medium" that will appeal most to you.
iast8er 2 years ago
I see
Well my Pioneer recommended is 1.25 and max is 1.60 for ported. I currently have it on a 1.75 so Im believing Im loosing some of the punch.
slim142 2 years ago
Could be a port issue, not just box volume. Just a guess though.
iast8er 2 years ago
Well my port is 14 5/8 height and 1 3/4 width. I dont know the depth.
I dont even know what the box is tuned to lol I just replaced my CVR to this and Im not dissapointed, but the box is giving my sub somewhat a hard time
slim142 2 years ago
And how the hell do you make your system hit every single note? Thats pretty amazing if you ask me.
slim142 2 years ago
Heh, I dunno I'm just good? lol I'm jp. I dunno what to say, just take your time, save up your money and don't buy crappy equipment. Build yourself a good install to go along with the good equipment and you'll end up with a smile on your face 9 times out of 10.
I'll post up a link of my build thread in the description so you can see step-by-step how it was built.
Thanks for the comments.
iast8er 2 years ago
what size amp you got on that
evanmaynard14 2 years ago
US Amps Merlin MD3D, 1200w @ 2ohms.
It's also in the description ;)
iast8er 2 years ago
CooL sound system
mariuspol5 2 years ago
amazing how this thing hits fucking every note! not like most subs
dizzyblade12345 2 years ago
this truck is the "good" kind lol
SonySasuke 2 years ago
carefull, my buddy blew the seal to his back window in his truck, and he has a weaker system
almanCCC 2 years ago
nice system. love the sub and enclosure. nice camera too lol
archinuk417 2 years ago
haha thanks.
iast8er 2 years ago