Hmmm, I think I have to try this with my motorcycle. What do I need to wrap-- ignition wires from IC to spark plug, battery wires (of course careful with shorting the connections, hehehe), what else po?
Gusto ko rin po sana makabili ng GTOil nyo, pero may distributor na po ba kayo dito sa Luzon?
And I wasn't even done wrapping yet!..tomorrow I'll do the cable tips connecting to the spark plugs, battery cables, battery, and if i have spare tape, cover the whole spark plug cables and the ignition coil as well (pwede po ba sa ignition coil?)
It's amazing to experience this simple upgrade actually work!!!
Got home early from work today so i had some time to try this on my '74 Braziian VW bug, bone stock engine and rarely used because of registration issues..
I wrapped aluminum foil tape over the cable tips just above the distributor and also the ignition cable tips connecting dist and coil..
1-click start and a smoother idle..WOW!!! (usually takes 2-4 clicks for my bug to start specially when not used for a long period)
@grgbone Cool!... another believer! Thanks a lot grgbone for sharing your testimony. I got the same effect on a rusty nearly junk beetle that was literally neglected for years. Now, it's always one-click starting even if you don't use it for a week. It's just amazing!. But don't take my word on it... people should try it for themselves and experience it themselves before they judge this free information that my group is sharing the whole world. Credit goes to the OTG Group. Enjoy it! :-)
yes, i'm also sharing the tech to my office mates and they are so excited to try it!
by the way , would it be okay to wrap again with electrician's tape over the aluminum?
by the way what's in the aluminum and what other materials are good for energy shielding? i've seen the blue pvc pipes in your charade (cool!) and wondered which is better at shielding..or were your wires covered with aluminum under the PVCs?
@grgbone You can do away with PVC's... but they look nice though. The best material to use is aluminum foil then wrap it with PVC Tape. There are aluminum tapes... but I wouldn't recommend that because it has adhesive... and I am not sure about the adhesive if it will enhance or suppress the capacitive trait of the shielding technique. Watch my latest video on the bug doing burn out donuts. with a loose spark plug cable contact on #1 and #2. :-)
I didn't mean to delete my comments, I took a 92 Honda Accord Wagon and wrapped 5 wires with an increase from 24-40 MPG. I wrapped more today, we'll keep you posted. Trav from S.F. Bay Area.
@jus1gear Now that's a WINNER!... Thank you for trying it!... You just validated this idea. Cheers!!! :-) ... by the way... Mr. X says Good Day! Good Job!...
@ConnivingBones ... not everything.... only those items that need energy shielding. To understand this science... please look through the following items for your reference: "Faraday Cage, thermo shielding advantages, faraday caging, electromagnetic fields - how it affects electrical and electronic equipments... etc,"
@ma70killer Hahaha...did you know I have to re-read your comment for 100 times before I got it. Lol... I almost flagged you. Actually... if you wrap your copper coins with aluminum foil... it becomes a sort of capacitor... now all you need is to add some circuit and diodes... Cheers! :-D
@ma70killer Reading it 100 times - is just a figure of speech.
I am aware you probably meant to insult me with your comment... but what you didn't realize - you just gave an idea away without really realizing it.
I don't really need to thank you for it since you never really intend to give it away... as a matter of fact, you literally threw it away. Thank's anyway.
I guess one mans garbage is another mans treasure...
@ehnriko, insult you? why would i do that? am a sort of scientist too myself and my mind is open for ideas, i have a project engine on its way to i dont' know..blowin up its HG..pardon me if thats how it sound to you, cheers!
does this give u more miles to the gallon?
juniloc 9 months ago
Hmmm, I think I have to try this with my motorcycle. What do I need to wrap-- ignition wires from IC to spark plug, battery wires (of course careful with shorting the connections, hehehe), what else po?
Gusto ko rin po sana makabili ng GTOil nyo, pero may distributor na po ba kayo dito sa Luzon?
jmsapinoso 1 year ago
And I wasn't even done wrapping yet!..tomorrow I'll do the cable tips connecting to the spark plugs, battery cables, battery, and if i have spare tape, cover the whole spark plug cables and the ignition coil as well (pwede po ba sa ignition coil?)
Will do test run tomorrow..
Thanks for sharing sir ehnriko, and Mr. X!
grgbone 1 year ago
Comment removed
grgbone 1 year ago
Comment removed
grgbone 1 year ago
It's amazing to experience this simple upgrade actually work!!!
Got home early from work today so i had some time to try this on my '74 Braziian VW bug, bone stock engine and rarely used because of registration issues..
I wrapped aluminum foil tape over the cable tips just above the distributor and also the ignition cable tips connecting dist and coil..
1-click start and a smoother idle..WOW!!! (usually takes 2-4 clicks for my bug to start specially when not used for a long period)
grgbone 1 year ago
@grgbone Cool!... another believer! Thanks a lot grgbone for sharing your testimony. I got the same effect on a rusty nearly junk beetle that was literally neglected for years. Now, it's always one-click starting even if you don't use it for a week. It's just amazing!. But don't take my word on it... people should try it for themselves and experience it themselves before they judge this free information that my group is sharing the whole world. Credit goes to the OTG Group. Enjoy it! :-)
ehnriko 1 year ago
@ehnriko
yes, i'm also sharing the tech to my office mates and they are so excited to try it!
by the way , would it be okay to wrap again with electrician's tape over the aluminum?
by the way what's in the aluminum and what other materials are good for energy shielding? i've seen the blue pvc pipes in your charade (cool!) and wondered which is better at shielding..or were your wires covered with aluminum under the PVCs?
and thanks OTG!..
grgbone 1 year ago
@grgbone You can do away with PVC's... but they look nice though. The best material to use is aluminum foil then wrap it with PVC Tape. There are aluminum tapes... but I wouldn't recommend that because it has adhesive... and I am not sure about the adhesive if it will enhance or suppress the capacitive trait of the shielding technique. Watch my latest video on the bug doing burn out donuts. with a loose spark plug cable contact on #1 and #2. :-)
ehnriko 1 year ago
@ehnriko
i thought it was aluminum tape in the video so i used my leftover tape..
works well though..
did you do shielding on the bug as well? nice promotional video!
grgbone 1 year ago
I didn't mean to delete my comments, I took a 92 Honda Accord Wagon and wrapped 5 wires with an increase from 24-40 MPG. I wrapped more today, we'll keep you posted. Trav from S.F. Bay Area.
jus1gear 1 year ago
Comment removed
jus1gear 1 year ago
@jus1gear Now that's a WINNER!... Thank you for trying it!... You just validated this idea. Cheers!!! :-) ... by the way... Mr. X says Good Day! Good Job!...
May the force be with you!
ehnriko 1 year ago
So wrap everything in aluminum foil, shielding it, and it will be more efficient? is that what i am to gather from this video?
ConnivingBones 1 year ago
@ConnivingBones ... not everything.... only those items that need energy shielding. To understand this science... please look through the following items for your reference: "Faraday Cage, thermo shielding advantages, faraday caging, electromagnetic fields - how it affects electrical and electronic equipments... etc,"
ehnriko 1 year ago
wow, i will use it on my pennies to reduce spending..
ma70killer 1 year ago
@ma70killer Hahaha...did you know I have to re-read your comment for 100 times before I got it. Lol... I almost flagged you. Actually... if you wrap your copper coins with aluminum foil... it becomes a sort of capacitor... now all you need is to add some circuit and diodes... Cheers! :-D
ehnriko 1 year ago
@ehnriko , its just a short sentence that made you read it 100 times..
ma70killer 1 year ago
@ma70killer Reading it 100 times - is just a figure of speech.
I am aware you probably meant to insult me with your comment... but what you didn't realize - you just gave an idea away without really realizing it.
I don't really need to thank you for it since you never really intend to give it away... as a matter of fact, you literally threw it away. Thank's anyway.
I guess one mans garbage is another mans treasure...
ehnriko 1 year ago
@ehnriko, insult you? why would i do that? am a sort of scientist too myself and my mind is open for ideas, i have a project engine on its way to i dont' know..blowin up its HG..pardon me if thats how it sound to you, cheers!
ma70killer 1 year ago