People are idiots, good job man great runs. There's always gonna be haters. And thats cause this is your wifes! Lol i bet all these other guys hating drive hondas or their parents vehicle.
I saw your video on PT.net and came to your channel. Keep it up brother
So what bolt ons he have? You can here the exhaust is stock. So he has a tire and what? also what was the DA. I would run you anytime. I only ran 11.8 also with a DA of 3000+.
Oh that was before the engine build and some other work. I will not even spray it to beat you.
@ohioborn80 its cool my wifes truck is 5300 pounds goes 7.20-7.22 in the 1/8 and its wifes daily driver. 11.8s.. i went 11.32@120 so hit me up when you get into the low 10s.
@BLOWNTBSS my car just went 11,4 with bolt ons..now at shop doing cams. few other things...shoot for 10.7 n/a then will be putting a F1 procharger on it. want 10's n/a first. i decided say screw spray and have constant boost...lol
Im not trying to diss on ur TBSS cause its sick but thats a stock 5.0 no way a bolt on 50. is running 8.3 in the 1/8th and hes got DR's. I've ran an 8.2 on stock rim/tire combo in my 5.0, but then again he could be a shitty driver...
@1HOTLS1 no you get worse times unless you have a transbrake. For a yank or vig verter to get the best 60 foot time it needs to be flashed right in order to do that is going right off idle it hits the converter the hardest and in turn better 60 foot times. If you preload it wont hit as hard out the hole
If you just did a burnout, DO NOT do that dry hop. Thats only for street tires. You dont do burnouts on street tires otherwise they will get slick, so you do the dry hop. You are going to snap something doing that in the sticky stuff after you did your burnout,
@LMBC6Brian 14 bolt rear end with 4.10 gears stock on this truck. Ive been getting low 1.6s for the past 3 years on my trailblazers. mickey thompson drag radial same tire i use at the street races no problems ever.
man that makes me wanna max out my credit card on my trailblazer ss!!! lmao i have awd tho. that 1/8 run was about a 11.40 1/4 run!!!! very impressive!!!! whats done to that beast? i cant wait for my stall that should be here anyday!!! im hopin for bottom 13s with the 3200 stall,cai and tune.
@BLOWNTBSS its a nasty beast! is it a real intake like fast or do you mean cold air intake? what make and size stall? built trans? sorry for all the questions im just tryin to learn as much as possible about my truck and the mods.
@BLOWNTBSS built tuff! i hope i dont regret getin the circle d 3200 stall but i hear all good so far about it and have guys that i know that run it and recomended it. 1 has a cammed tbss and the other a cammed 5.3 07 silverado reg cab short bed 2wd both are in the 12s and they love it.
@BLACKLACDTS dont waste time with the 3200 the yank ptb3600 give better 60 foots and rides real nice. Im in san francisco and hills here are crazy and my wifes drives the ptb3600 yank stall no issues.
@BLOWNTBSS i was a lil scared goin that high with stock trans. im buyin the pcm4less trans cooler too.i will check it out and if i dont like it i will change it.
@BLACKLACDTS talk to rpm or flt both are good. stock tranny with stall i dont trust some people are ok but if your gonna pull the tranny might as well do it right the first time.
@BLOWNTBSS i agree about doin it all at once but i will have to see what im goin to do. i mite just see how long it last and if it goes just do the built tranny then. i dont drive it hard and it mite make 1 pull a week.
People are idiots, good job man great runs. There's always gonna be haters. And thats cause this is your wifes! Lol i bet all these other guys hating drive hondas or their parents vehicle.
I saw your video on PT.net and came to your channel. Keep it up brother
wtfidkeee 1 month ago in playlist More videos from BLOWNTBSS
So what bolt ons he have? You can here the exhaust is stock. So he has a tire and what? also what was the DA. I would run you anytime. I only ran 11.8 also with a DA of 3000+.
Oh that was before the engine build and some other work. I will not even spray it to beat you.
ohioborn80 6 months ago
@ohioborn80 its cool my wifes truck is 5300 pounds goes 7.20-7.22 in the 1/8 and its wifes daily driver. 11.8s.. i went 11.32@120 so hit me up when you get into the low 10s.
BLOWNTBSS 4 months ago
@BLOWNTBSS my car just went 11,4 with bolt ons..now at shop doing cams. few other things...shoot for 10.7 n/a then will be putting a F1 procharger on it. want 10's n/a first. i decided say screw spray and have constant boost...lol
ohioborn80 4 months ago
Im not trying to diss on ur TBSS cause its sick but thats a stock 5.0 no way a bolt on 50. is running 8.3 in the 1/8th and hes got DR's. I've ran an 8.2 on stock rim/tire combo in my 5.0, but then again he could be a shitty driver...
sniffmapoopi 1 year ago
@sniffmapoopi what was the da. usually east coast and texas guys are faster stock due to the track da which we never get lucky out here.
BLOWNTBSS 1 year ago
is this 5.0 stock? cuz the second race M3SRT buddy 5.0 had some boltons
kossy87 1 year ago
not sure but guy here has bolt ons and running 11.90s and i destroyed him 3 times on the street.
BLOWNTBSS 1 year ago
you dont be revin it up?
1HOTLS1 1 year ago
@1HOTLS1 no you get worse times unless you have a transbrake. For a yank or vig verter to get the best 60 foot time it needs to be flashed right in order to do that is going right off idle it hits the converter the hardest and in turn better 60 foot times. If you preload it wont hit as hard out the hole
BLOWNTBSS 1 year ago
If you just did a burnout, DO NOT do that dry hop. Thats only for street tires. You dont do burnouts on street tires otherwise they will get slick, so you do the dry hop. You are going to snap something doing that in the sticky stuff after you did your burnout,
LMBC6Brian 1 year ago
@LMBC6Brian 14 bolt rear end with 4.10 gears stock on this truck. Ive been getting low 1.6s for the past 3 years on my trailblazers. mickey thompson drag radial same tire i use at the street races no problems ever.
BLOWNTBSS 1 year ago
man that makes me wanna max out my credit card on my trailblazer ss!!! lmao i have awd tho. that 1/8 run was about a 11.40 1/4 run!!!! very impressive!!!! whats done to that beast? i cant wait for my stall that should be here anyday!!! im hopin for bottom 13s with the 3200 stall,cai and tune.
BLACKLACDTS 1 year ago
@BLACKLACDTS intake/tune/long tubes/stall/cam and 100 shot
BLOWNTBSS 1 year ago
@BLOWNTBSS its a nasty beast! is it a real intake like fast or do you mean cold air intake? what make and size stall? built trans? sorry for all the questions im just tryin to learn as much as possible about my truck and the mods.
BLACKLACDTS 1 year ago
@BLACKLACDTS custom ls7 4 inch intake and stock intake manifold. yank ptb3600 stall and a built trans by FLT Transmission.
BLOWNTBSS 1 year ago
@BLOWNTBSS built tuff! i hope i dont regret getin the circle d 3200 stall but i hear all good so far about it and have guys that i know that run it and recomended it. 1 has a cammed tbss and the other a cammed 5.3 07 silverado reg cab short bed 2wd both are in the 12s and they love it.
BLACKLACDTS 1 year ago
@BLACKLACDTS dont waste time with the 3200 the yank ptb3600 give better 60 foots and rides real nice. Im in san francisco and hills here are crazy and my wifes drives the ptb3600 yank stall no issues.
BLOWNTBSS 1 year ago
@BLOWNTBSS i was a lil scared goin that high with stock trans. im buyin the pcm4less trans cooler too.i will check it out and if i dont like it i will change it.
BLACKLACDTS 1 year ago
@BLACKLACDTS dont do a stall converter in these stock trannys. Save your money get a built one and a yank ptb3600 stall
BLOWNTBSS 1 year ago
@BLOWNTBSS ok, whats the best tranny? i already looked at finish line the 1 i liked was $3500. the stock tranny cant handle it?
BLACKLACDTS 1 year ago
@BLACKLACDTS talk to rpm or flt both are good. stock tranny with stall i dont trust some people are ok but if your gonna pull the tranny might as well do it right the first time.
BLOWNTBSS 1 year ago
@BLOWNTBSS i agree about doin it all at once but i will have to see what im goin to do. i mite just see how long it last and if it goes just do the built tranny then. i dont drive it hard and it mite make 1 pull a week.
BLACKLACDTS 1 year ago