@TheMrfrawg SKS's were never designed to take a detachable magazine, so the internal magazine MUST be loaded via stripper clips. (Both terms apply in this case.)
So, this is really just a silly piece of garbage in the end. If someone wants a short rifle in 7,62x39 soviet.... instead of wasting a nice SKS carbine, they can just get a WASR-10. Which is a relatively short version of the AK-47 produced by Century Arms. This bullpup weapon however.... more accurate at distance.
@WolfFawkes With an additional 20 bucks you can get a high capacity magazine release and feed it the same 20 or 30 round sks mags. It may even beable to support a drum magazine
@zizzy007 i know bullpups have trigger rod problems due to faulty designs; ill take my folding pistol grip anyday...still got the full barrel and bayonet if needed(for the zombie invasion; or (censored for our protection) peace out fellow enthusiast
Haha, I like how you can't spell. It's not real, he's showing off the rifle. Maybe you should stand there so he can shoot at you. To make it more realistic of course.
And i love how his finger is clearly on the trigger at 2:00, and how the rest of the vid hes swinging from left to right flagging the camera person. Camera is moving too much to be a tripod before someone comments and says that's the case. umm... anyone else catch that?
nice attempt, but its still a pretty much useless rifle now more difficult to operate. (saying this even though I own one). Im just gonna save up and get a p90 still or an FS2000
I do believe the original cofiguration was just fine. 1 vs 1 with this polymer and the wood original, the original would way out perform. Oh, one major thing about a bullpup is the charging handle needs to be on the operators side. Normally the forearm is gripped and trigger hand charges where with this you have to lean over and find the handle and charge over the top with your left hand. Seems like too much is going on and if the dirt was shooting back it would have you at that point.
2:30 what is this. i have never seen this shooting style. do any of you know what its called? it looks kinda pointless....but i don't know anything about it. the sks has a heck of a recoil, that would be really inaccurate.
Wow this video really is pure bullshit. "no modificatoins"? where the hell is the front sight block? Oh and reloading stripper clips into a "modern" firearm is beyond pointless. Did anyone notice how he only used a 10 rnd mag, its becuase the reload time would have been rediculous, and broken the propaganda spell this video is trying to cast. the recoil is still heavy compared to a modernized ak with a muzzle brake.
@fpsfug and did you notice how close his face was to the bolt. its practically right above it. i would be worried about ejected brass, or what would happen if something went completely wrong, and there goes your face.....but the main point is to show you how you can change an sks into a bullpup rifle. but i do find it pointless. there is another conversion that still has the front sight and i think it looks a little better
The high cap mags can work. I have a Norinco with the Tapco Intrafuse stock and run both Tapco and Pro-Mag 20 rounders without any problems (even with surplus ammo).
Music is way over the top but for those of you complaining about the action being to close to the face an eye, take a look at that cover that flips up every time he is reloading. It also redirects the ejected case, not a bad design. Crappy triggers are common in just about every bullpup.
that honey badger dude roland should do a voice over for this vid
"whoo look, the tactical guy runs down hills, oh my it reloads fast, and check out his boonie, tactical dude is badass, he's got a bullpup , tactical dude dont give a shit "
Either this kit has problems or the actor was forgetting to take off the safety. He would pull the trigger several times before it fired. Re watch and you witll see.
I have a Norinco early '60's model SKS, unmodified, and it's runs 100% reliably with Mag Pro 30 rnd. Mag. I've got 500+ rounds without a single failure to feed/fire/or eject running the cheapest surplus crap out there... Don't understand why everyone hates on the idea? Clean your gun!
This looks quite cool. I really like my sks with a wood stock but I wouldn't mind getting another and make it tacticool. And a bullpup stock would definitely do that. But does anyone on here know about bullpups and Canadian gun laws. Can I make an sks bullpup and use it in canada without a restricted liscence.
I have yet to find a bullpup conversion with a decent trigger mechanism no matter the rifle. Do you guys have a new idea or is it just a bunch of awkward linkage like the rest?
@LordRuckus Most bullpup kits use a wire or cable linkage between the re-positioned trigger and the original. These guys at least use a solid piece of metal for the linkage, which is better, but still not great. Street reviews on this piece suggest that while the trigger pull is alright, the trigger reset is pretty bad and practically eliminates the ability to rapid-fire if you're in a situation that needs it. I wish they would revise it to work in some kind of return spring for the new trigger.
Lol, what a dork, half the video shows him running like a girl, cool design bullpup but you better wear glasses or get powder in eye being so close to the ejecting cases
SKS' just really dont like hi cap mags, unless its one of the models built to take AK mags. About the highest cap you can manage with any sort of reliability is the Tapco 20 rounders.
@Sabretoothkiller its still better than pokeing a stick. Make your shots count. The bull pup concept makes sense in close quarter urban warfare senarios where your swing room may be liimited in tight quarters. Also its a cheaper alternative to the real deal bullpups. Ive never used this product but can see the benifits if the rig runs good. more mag capacity is good but practice with what you got. The guy was reloading fast
I think the kit would look nicer with the front stock going out a bit further to act as a barrel shroud. That long barrel sticking out like that looks fragile and unbalanced... Just aesthetically speaking...
Thats the way guns ought to be fired. How ever when ever I go shooting I never have more then one magazine or striper clip so its always one bullet at a time by hand.
You do not want your face that close to the chamber of an SKS. Its not uncommon for them to vent some gas back in your face now and then. I get it in the eyes once in a while with a regular stock. This would just suck.
I don't like the idea of the action being that close to my face, it kind of bugs me in it's normal position already... The SKS is still a formidable weapon in medium (100 yards) and close ranges.
Usually I curse the videos that turds put up on youtube that relate to weapons. Your video is by far the best I've seen regarding the SKS. This vid is number one in my book. Replays never get old. Thank you.
Clever design, brilliant innovation, but it still has the accuracy of a SKS. If it takes you 3 months to save the $500 or more you'll need to put one of these together, you can save for a whole year and buy a real bullpup that will have several times greater accuracy and performance. After all, you're going to wait a year to get your bullpup stock from SG Works, as they are likely using money from current orders to build last year's orders. The more you know...
You assume that people are going to go out, buy and SKS and then covert it. For people such as myself that purchased SKS'es when they were under $100 a pop, its a pretty decent value. Is it a be-all end-all? No. If I were to spend $500+ on a 7.62, there are many more competent platforms. But for hand-me-downs and surplus buys over a decade ago, its a nice design for a decent price.
This is pretty kickass for what it is. I don't know much about the SKS platform, but I would like to see if you could use a standard AK magazine to speed up reload times. I'm sure you've thought about this already, but it's just a suggestion.
Looks interesting, but I'd have an issue with the reloading process... It takes entirely too long. Don't they make magazine conversion kits for the sks? I'd try to incorporate that into the design
I hate bullpups. I know all the reasons and advantages to the configuration, and I've even shot a few, but when all is said and done, a coventional set up works best for me. I'm still interested, I still look 'em over, wondering if one day I'll like one, but not likely. oh well...
Looks better than some other conversions I've seen. In reality though, would you be tossing away your strippers? Just like magazines, when you've run through all your ammo and have tossed your magazines, now you're gonna load your toy one round at a time. Unless of course, you have an endless supply of strippers stashed somewhere.
There is a simple mod to make your SKS a side ejection rather than an upward ejecting action. The upward trajectory is caused by the angled transition at the rear of the ejection port - if this is ground vertical, the shells eject sideways rather than upwards. Takes 20 mins, a dremel and a bit of bluing.
This video is a little over done, but this weapon system should not be overlooked. Perfect for states with AWB or if you want a carbine thats 50 state legal. This would be useful for in vehicle defense, or a neighborhood watch in a dangerous neighborhood. Because for normal people who are not cops, security, or military, if you need more then 10 rounds to defend yourself, your fucked!
@tipusultan6 "MAGAZINE" !!! It's called a "MAGAZINE" !!! An enclosed "box" which holds cartridges is a "MAGAZINE". A "clip" is what an M1 Garand uses. A "stripper clip" is what you see in this vid at 1:45 and 1:58 and 2:48, etc. etc.......and those are used to fill a "MAGAZINE" (in this case, an "internal box magazine". Learn your nomenclature, folks. It really makes a difference, and people who "know" firearms will think more highly of you if you get it right. You may thank me now. XD
@tipusultan6 Didnt know they made 30 shot clips... oh 30 round magazines. Why do so many people call magazines clips? I know you can load this rifle with a stripper clip, but not familiar with a 30 round one. haha just busting your balls :) but seriously.
@TNPerPunknEater Fuckoff TnPerPunkfucker, i'm sick of you soldiers of fiction sitting in your lazyboy pretending to know it all. i made a stupid mistake and said clip instead of magazine. so what. I've been shooting for 30 years and have over 40 guns, grew up in montana and can shoot a quarter at 100 yards with open sites. i know the ends and outs of all of them. i outshot a special forces marksman 2 years ago with my ar15, so keep your mouth shut.
@TNPerPunknEater F*ckoff TnPerPunkfucker, i'm sick of you soldiers of fiction sitting in your lazyboy pretending to know it all. i made a stupid mistake and said clip instead of magazine. so what. I've been shooting for 30 years and have over 40 guns, grew up in montana and can shoot a quarter at 100 yards with open sites. i know the ends and outs of all of them. i outshot a special forces marksman 2 years ago with my ar15, so keep your mouth shut.
@TNPerPunknEater Fckoff, I'm sick of you soldiers of fiction sitting in your lazyboy pretending to know it all. i made a stupid mistake and said clip instead of magazine. so what. I've been shooting for 30 years and have over 40 guns, grew up in montana and can shoot a quarter at 100 yards with open sites. i know the ends and outs of all of them. I outshot a special forces marksman 2 years ago with my ar15, so keep your mouth shut.
@MurderByFluoride First of all what the hells a matter with you? Secondly you're an idiot a rifle chambered in .308 is technically a battle rifle. but thats semantics and i dont really care about semantics. and I put a question mark which is signifying a question which is me saying correct me if i'm wrong. Third, why are you so disgruntled? Are you bored and/or off the meds? Seriously?? I've seen CETME .308's and they look like g3's which apparently is vice versa. But anyway you're crazy i think
@MurderByFluoride okay champ CETME .308's are .30 cal but they have about a quarter mor casing behind them. So naturally the CETME .308 (g3 clone right?) is going to be heavier. And seriously what was the arguement here?
yes you are right when you go to battle you would have a loaded mag the comment i made about the box being thrown out of a duece an 1/2 was not during a fire fight it was when we first got there. regardless of the box they all come in stripper clips these days and in that box they gave us they were on stripper clips but you need an adapter to fit on the magazine. which was rare to see in the field. but who even cares about stripper clips i wouldn't buy this stupid gun cause i don't like sks
I question your experience because every box of ammo I've ever got has adapters in there along with the rounds on stripper clips. everyone i know was smart enough to snag one or two and stick it somewhere on their LBV or somewhere on their person. your wasting time loading mags one by one. just my experience and two cents.
we didn't have boxes of ammo when i went to iraq it was in bulk either in a large box we called brass tubs or buckets we called brass buckets and loading one by one did suck we asked for stripper clips but we never got them. you can question my experience if you want but i know what i know just because your experience was different doesn't mean everyones was the same.
@traceradam yeah we were supplied with 210 rounds of ammo which is 7 mags 6 mags in our LBE and 1 in our weapon that is a standard combat load but when we arrived to iraq we had 7 empty mags because you can't take ammo on to commercial flights. when we arrived to kuwait we loaded our magazines before we flew to iraq helicopter. when ever we needed ammo in iraq we went to our armory and used brass buckets. when we came back to kuwait we dropped our ammo in brass buckets.
i think the FN should adapt the P90 to become a rifle, but still have similar operational parts. that way, the empty case comes out the bottom of the gun
Am I the only one who likes the SKS as is. It seems everyone who buys one wants to turn it into an AK, AR or what ever the hell this thing is. I think a stock SKS is a BEAUTIFUL thing!
SKS's are a awesome, almost flawless weapon. but they are so cheap "I got mine for 100 bucks" that it's a easy and practical decision to mod and convert these to the owners preference. I still have one brand new in the box, never to be shot unless I find an awesome excuse to. Mod one for hunting, one for home defense, one for plinking and keep one classic and you'll still come out cheaper than a lot of decked out rifles.
Look it's G.I. Jack-off.
jbird206 2 days ago
It's almost hard to believe that this unholy abomination was once a glorious SKS carbine designed by Sergei Simonov...
gothkid287 3 days ago
6 month wait period on getting one :(
HDMann292 1 week ago
Comment removed
TheMrfrawg 2 weeks ago
@TheMrfrawg SKS's were never designed to take a detachable magazine, so the internal magazine MUST be loaded via stripper clips. (Both terms apply in this case.)
So, this is really just a silly piece of garbage in the end. If someone wants a short rifle in 7,62x39 soviet.... instead of wasting a nice SKS carbine, they can just get a WASR-10. Which is a relatively short version of the AK-47 produced by Century Arms. This bullpup weapon however.... more accurate at distance.
WolfFawkes 2 days ago
@WolfFawkes With an additional 20 bucks you can get a high capacity magazine release and feed it the same 20 or 30 round sks mags. It may even beable to support a drum magazine
GreenJesus423 14 hours ago
me likey. wonder if its available in canada
cheomire 1 month ago
This has been flagged as spam show
And so, the Halo battle rifle was born.
Sorry, it had to be said, also. in seriousness, cool gun!
Tarik360 1 month ago
Comment removed
Tarik360 1 month ago
Too bad they are a no go in Canada
DMPinBC 1 month ago 4
just needs a compensator, the history still lives in this rifle!!
leomantles 1 month ago
pew pew i liek
oYSpongebobYo 1 month ago
bull up rifles suck. I hate them. I'd prefer standard sks.
zizzy007 1 month ago
@zizzy007 i know bullpups have trigger rod problems due to faulty designs; ill take my folding pistol grip anyday...still got the full barrel and bayonet if needed(for the zombie invasion; or (censored for our protection) peace out fellow enthusiast
TheMrfrawg 2 weeks ago
lol that holographic sight is in Battlefield 3. I'd love one.
Yams313 1 month ago
haha i like how u hide from dirt behind a see threw mesh wall
CHS1488 1 month ago
@CHS1488
Haha, I like how you can't spell. It's not real, he's showing off the rifle. Maybe you should stand there so he can shoot at you. To make it more realistic of course.
CroatianCommando 1 month ago
call me crazy but i dont like my face that close to the action,i like my ear i wanna keep it on the side of my head
flotsamthoughts 1 month ago
And i love how his finger is clearly on the trigger at 2:00, and how the rest of the vid hes swinging from left to right flagging the camera person. Camera is moving too much to be a tripod before someone comments and says that's the case. umm... anyone else catch that?
JX02123 1 month ago
nice attempt, but its still a pretty much useless rifle now more difficult to operate. (saying this even though I own one). Im just gonna save up and get a p90 still or an FS2000
JX02123 1 month ago
Where the pka scopes come from?
ELITEWAFFLES9 1 month ago
You!!!..You, disgusting soil murderer!
DrZombie00 1 month ago
Nice paper defensive barriers.
BADBRYZ 1 month ago
lol it doesnt a SKS anymore............
KellerDominator 2 months ago
Love the cheek weld discipline. And that sweet grab the of the stock shooting was sick! lol.
suttsax 2 months ago
pretty cool reloading method
ermaslv44 2 months ago
I think I see an alien, zombie, mutant, infection, liberal entitlement-bankruptcy survivor!
xxxxAXIxxxx 2 months ago
Looks really good, bullpup makes a rifle very compact but, reloading bullpup takes some finesse...
SSUstufRudel 2 months ago
Is this a trailer for the new Daniel Day Lewis movie?
tbtregenza 2 months ago
dear santa....
ludicer 2 months ago
FUCK YOU WORMS!!! AAARRGHHHH!!!!
mlb0226 2 months ago 2
I do believe the original cofiguration was just fine. 1 vs 1 with this polymer and the wood original, the original would way out perform. Oh, one major thing about a bullpup is the charging handle needs to be on the operators side. Normally the forearm is gripped and trigger hand charges where with this you have to lean over and find the handle and charge over the top with your left hand. Seems like too much is going on and if the dirt was shooting back it would have you at that point.
EmptyMags1 2 months ago
I WANT TO KILL YOU WITH A RAKE YOU FUCK.
DoctorAsshole1 2 months ago
i could easily reload a regular sks with stripper clips in half the time... and i dont have to look down and half backward to do it
forbzy61 2 months ago
halo battle rifle??
xbox360master5 2 months ago
@bowhunter42995 thats why there was a round deflector over the bolt so it doesnt go straight up
BenTheHunter98 2 months ago
2:30 what is this. i have never seen this shooting style. do any of you know what its called? it looks kinda pointless....but i don't know anything about it. the sks has a heck of a recoil, that would be really inaccurate.
bowhunter42995 2 months ago
2:30......................what?
What are you doing?? TACTICAL MMMMMMMMCALLADUTYMMMMMMMM
danksmoker1100 2 months ago
looks like something with steyr
Primitiveamoeba 2 months ago
Sir! We're taking heavy fire from that dirt over there! We need backup now! Do you copy!?
planetary109 2 months ago
looks like a bunch of queers to me.
melvinvswaldo 2 months ago
Wow this video really is pure bullshit. "no modificatoins"? where the hell is the front sight block? Oh and reloading stripper clips into a "modern" firearm is beyond pointless. Did anyone notice how he only used a 10 rnd mag, its becuase the reload time would have been rediculous, and broken the propaganda spell this video is trying to cast. the recoil is still heavy compared to a modernized ak with a muzzle brake.
fpsfug 3 months ago
@fpsfug and did you notice how close his face was to the bolt. its practically right above it. i would be worried about ejected brass, or what would happen if something went completely wrong, and there goes your face.....but the main point is to show you how you can change an sks into a bullpup rifle. but i do find it pointless. there is another conversion that still has the front sight and i think it looks a little better
bowhunter42995 2 months ago
@bowhunter42995
Better yet dont even try to fire this left handed as the bolt would be eating your cheek off. This looks like a poor mans p90.
loggerbomb 2 months ago
I love the SKS. I love bullpups. Great work guys.
AshTheMohican 3 months ago
I just received a response back today
westgl2006 3 months ago
This has been flagged as spam show
Is anyone else that has placed an order with SGWorks having a problem getting a hold of these guys, are they still in business?
I called them on the phone nothing, I sent a couple of e-mails Nothing
westgl2006 3 months ago
The high cap mags can work. I have a Norinco with the Tapco Intrafuse stock and run both Tapco and Pro-Mag 20 rounders without any problems (even with surplus ammo).
MrSkillz1971 3 months ago
thats a disgusting looking sks
MrRockypanda 3 months ago
it's california legal, right?
cmh17a 3 months ago
im digging the stripper clip reloads
future10marine 3 months ago
Music is way over the top but for those of you complaining about the action being to close to the face an eye, take a look at that cover that flips up every time he is reloading. It also redirects the ejected case, not a bad design. Crappy triggers are common in just about every bullpup.
TheTmgunz 3 months ago
that honey badger dude roland should do a voice over for this vid
"whoo look, the tactical guy runs down hills, oh my it reloads fast, and check out his boonie, tactical dude is badass, he's got a bullpup , tactical dude dont give a shit "
MrBfd0412 3 months ago
Either this kit has problems or the actor was forgetting to take off the safety. He would pull the trigger several times before it fired. Re watch and you witll see.
MrSpeeddemonspeed 3 months ago
The dirt is invading, hold the line. HOOLLDD THHEE LIIINEE!!!
the rifle is nice though
touge242 4 months ago 22
@touge242 OH GOD THEY IT KEEPS COMMING!!. im going in! tell my wife I love her!!
MrCaptainNObeard 1 month ago
I think I just had a gungasm!!
412stock412 4 months ago
I have a Norinco early '60's model SKS, unmodified, and it's runs 100% reliably with Mag Pro 30 rnd. Mag. I've got 500+ rounds without a single failure to feed/fire/or eject running the cheapest surplus crap out there... Don't understand why everyone hates on the idea? Clean your gun!
DirtE30 4 months ago
See our new giraffe-friendly optics mounting system!
SyHopeful 4 months ago
what advantages would i get out of a bullpup rifle ???
50TNCSA 4 months ago
@50TNCSA
the shortened legnth and reduced recoil
the disadvantage is you won't really be able to point your gun around a corner with out exposing some of your torso like you can with regular rifle.
TheProjektcc 4 months ago
تحويل بندقية سيمونوف الى شتاير
والله إنجاز
AHMED1512008 4 months ago in playlist 7.62 x 39 SKS Yugo
@AHMED1512008
dude, i totally agree.
i think??
MrBfd0412 3 months ago
This looks quite cool. I really like my sks with a wood stock but I wouldn't mind getting another and make it tacticool. And a bullpup stock would definitely do that. But does anyone on here know about bullpups and Canadian gun laws. Can I make an sks bullpup and use it in canada without a restricted liscence.
kdoubleg 4 months ago
I have yet to find a bullpup conversion with a decent trigger mechanism no matter the rifle. Do you guys have a new idea or is it just a bunch of awkward linkage like the rest?
LordRuckus 4 months ago
@LordRuckus Most bullpup kits use a wire or cable linkage between the re-positioned trigger and the original. These guys at least use a solid piece of metal for the linkage, which is better, but still not great. Street reviews on this piece suggest that while the trigger pull is alright, the trigger reset is pretty bad and practically eliminates the ability to rapid-fire if you're in a situation that needs it. I wish they would revise it to work in some kind of return spring for the new trigger.
baggytheo 3 months ago in playlist SKS Bullpup
Lol, what a dork, half the video shows him running like a girl, cool design bullpup but you better wear glasses or get powder in eye being so close to the ejecting cases
top40productions 4 months ago
the guys outfit and the music made me laugh so hard
LikeToStayFresh 4 months ago
Looks really neat! I know I want one!
moOswe 4 months ago
Cool idea. But I honestly rather stick with the original, to me it just looks great with the wood and all.
LastCaress7 5 months ago
WTH? Will it not accept a detachable mag? 10 rounds at a time will not work in a tactical situation.
Sabretoothkiller 5 months ago
@Sabretoothkiller
SKS' just really dont like hi cap mags, unless its one of the models built to take AK mags. About the highest cap you can manage with any sort of reliability is the Tapco 20 rounders.
foughtwolf 5 months ago
@Sabretoothkiller its still better than pokeing a stick. Make your shots count. The bull pup concept makes sense in close quarter urban warfare senarios where your swing room may be liimited in tight quarters. Also its a cheaper alternative to the real deal bullpups. Ive never used this product but can see the benifits if the rig runs good. more mag capacity is good but practice with what you got. The guy was reloading fast
monsterman27 4 months ago
You shoot that soil!
tohairylittlewomen 5 months ago 14
Looks like the stock was modeled after an AUG
alvinyork1916 5 months ago
IS there any Force in the world who still uses SKS?
3klo 5 months ago
@3klo
I think the Chinese navy still use them as parade rifles, but I could be wrong. Regardless, they are awesomely cheap and reliable weapons.
foughtwolf 5 months ago
@3klo
I think the Chinese navy still use them as parade rifles, but I could be wrong. Regardless, they are awesomely cheap and reliable weapons.
foughtwolf 5 months ago
Fast and easy reload, nice handle..
mmm sexy stuff
TheMrNomus 5 months ago
The reloading looks really awkward.
enticed2zeitgeist 5 months ago
i gotta admit SKS is good, but it would be better if it had lesser recoil, its much more significant than SAR 21
1000AWP 5 months ago
I think the kit would look nicer with the front stock going out a bit further to act as a barrel shroud. That long barrel sticking out like that looks fragile and unbalanced... Just aesthetically speaking...
Tigadee00 5 months ago
Where given updating SKS is developed?
gospodinurod 5 months ago
The question is, HOW TO CLEAN IT?
Should I take off everything after each shooting ?
truesightgrabber 6 months ago
@truesightgrabber stick it in the dishwasher what you think?
pennyman10 5 months ago
The song is dramatic
dannyboy3008 6 months ago
Thats the way guns ought to be fired. How ever when ever I go shooting I never have more then one magazine or striper clip so its always one bullet at a time by hand.
0Anesthetic4u 6 months ago
noice
MrNwnwnwnw 6 months ago
what a faggot
NeverAlonePI 6 months ago
why dose he run down the hill 5 times before he shoots???
hunteraja 6 months ago
@hunteraja The gun jammed the first 4 times he ran down
blinkblinknohero 6 months ago
You do not want your face that close to the chamber of an SKS. Its not uncommon for them to vent some gas back in your face now and then. I get it in the eyes once in a while with a regular stock. This would just suck.
rustyfiero 7 months ago
yeah im so COOL!
l3arrett50 7 months ago
KILL THAT DIRT! KILL IT!
nicknuke7 7 months ago 26
@nicknuke7 How can you kill that which is already dead? o_0
AAV47 2 months ago
@AAV47 overkill.....
nicknuke7 2 months ago
my sks is a short paratroop version where the barrel only goes 3 in past the gas tube, should it still work with this kit?
ruffus97 7 months ago
everyone is thinking this so im just gonna say it halo rifle
50TNCSA 7 months ago
very nice
MetalSEGAKid1990 7 months ago
I am going to die of anticipation waiting for this thing!!!
LoboLoco8908 7 months ago
@LoboLoco8908 its garbage i heard from like half the owners
MrDip02 7 months ago 2
halo battle rifle?
MrYuhhhh 7 months ago
I think this is freaking cool!
CodyisOnline 7 months ago
I don't like the idea of the action being that close to my face, it kind of bugs me in it's normal position already... The SKS is still a formidable weapon in medium (100 yards) and close ranges.
link48010 7 months ago
Usually I curse the videos that turds put up on youtube that relate to weapons. Your video is by far the best I've seen regarding the SKS. This vid is number one in my book. Replays never get old. Thank you.
crusaderforever 7 months ago
I officially love this conversion.
By the way, what's the name of the song or songs you used in this video?
crisandm1016 7 months ago
Clever design, brilliant innovation, but it still has the accuracy of a SKS. If it takes you 3 months to save the $500 or more you'll need to put one of these together, you can save for a whole year and buy a real bullpup that will have several times greater accuracy and performance. After all, you're going to wait a year to get your bullpup stock from SG Works, as they are likely using money from current orders to build last year's orders. The more you know...
mikedudewtf 7 months ago
@mikedudewtf
You assume that people are going to go out, buy and SKS and then covert it. For people such as myself that purchased SKS'es when they were under $100 a pop, its a pretty decent value. Is it a be-all end-all? No. If I were to spend $500+ on a 7.62, there are many more competent platforms. But for hand-me-downs and surplus buys over a decade ago, its a nice design for a decent price.
MrTurdFurgeson 7 months ago
The music and the way the guy reloads the gun makes the video feel like its from metal gear solid....snake
DRMachuko 8 months ago
Look It's JEFF GORDON!!!!!
KiloEcho5 8 months ago
This is pretty kickass for what it is. I don't know much about the SKS platform, but I would like to see if you could use a standard AK magazine to speed up reload times. I'm sure you've thought about this already, but it's just a suggestion.
samtaekwondo123 8 months ago
i dont think i would shoot it cause i would probably put my hand on the barrel sorry just way to small
bigalis11 8 months ago
Looks interesting, but I'd have an issue with the reloading process... It takes entirely too long. Don't they make magazine conversion kits for the sks? I'd try to incorporate that into the design
wolfsoldier79 8 months ago
Reloading a bullpup rifle with a stripper clip, LOL. It's like it's futuristic and turn-of-the-last-century at the same time. I like it.
Spartan043 8 months ago
I hate bullpups. I know all the reasons and advantages to the configuration, and I've even shot a few, but when all is said and done, a coventional set up works best for me. I'm still interested, I still look 'em over, wondering if one day I'll like one, but not likely. oh well...
horselips 8 months ago
you cuold've left the harry potter sound effects out. really...
starcraftkillas 8 months ago 37
You are the Lord of WAR
aviomaster 8 months ago
Looks better than some other conversions I've seen. In reality though, would you be tossing away your strippers? Just like magazines, when you've run through all your ammo and have tossed your magazines, now you're gonna load your toy one round at a time. Unless of course, you have an endless supply of strippers stashed somewhere.
mckannick 8 months ago
lol....
This video is bullshit. Instead of actually reviewing the gun, I just hear some dramatic music, and a retard running around trying to act badass.
azulnox 8 months ago
This would be a awesome setup if only the sight rail wasn't so high off the rifle taking away from the accuracy.
00mak90 8 months ago
is this legal in kalifornia?
chickenpotpie2008 8 months ago
The guy does not use cover correctly at 2:12
o0ghi0o 8 months ago
How much faster is it to load the bullup with a stripper clip compared to a magazine?
TomsGuns 8 months ago
nice stripper clip reloading
theseventhday 8 months ago 2
I wonder how many times the camera man said, "please don't shoot me!" while this was filmed.
SamBaine91 8 months ago
There is a simple mod to make your SKS a side ejection rather than an upward ejecting action. The upward trajectory is caused by the angled transition at the rear of the ejection port - if this is ground vertical, the shells eject sideways rather than upwards. Takes 20 mins, a dremel and a bit of bluing.
shocker6966 9 months ago
what music is that in the intro?
Deban95 9 months ago
Looks good...But how much is it?
kop4321 9 months ago
@kop4321 $199 with a 4 month wait.
dk0403 9 months ago
that's a pretty crazy conversion, i'm personally not a fan of the bullpup look but i'm sure it suits some folks out there.
i lold when i saw he was just shooting at dirt with the dramatic music :P
thejuggernautbitch7 9 months ago
Normally I hate over-tacticooling of guns... But this is pretty cool
Tendrop711 9 months ago
OMG This is THE coolest modification for any gun transformation I have ever seen!!!!
trb4p 9 months ago
not so slow than I thought
kangjh29 9 months ago
Old school clips...LOL
ShotgunRyan 9 months ago
the reload is way too slow....
Scientist9221 9 months ago
Whats the trigger pull like? has it made it heavier, or just the same as it was before?
TaylorChalk 9 months ago
This video is a little over done, but this weapon system should not be overlooked. Perfect for states with AWB or if you want a carbine thats 50 state legal. This would be useful for in vehicle defense, or a neighborhood watch in a dangerous neighborhood. Because for normal people who are not cops, security, or military, if you need more then 10 rounds to defend yourself, your fucked!
KhazariaProject 9 months ago
so what parts are still from the SKS rifle? barrel and trigger mech?
101andrewj 9 months ago
wonder if this setup works with a 30 shot clip..hmmm.
tipusultan6 9 months ago 12
@tipusultan6 Well that all depend on whether or not you have a 30 round magazine to load it into, now doesn't it?
AthrunZalaZaft 8 months ago
@tipusultan6 or with the sks variant that take ak mags
TehBloodyYank556 8 months ago
Comment removed
MrDip02 7 months ago
@tipusultan6 magazine
awsometutarials2 6 months ago
@tipusultan6 "MAGAZINE" !!! It's called a "MAGAZINE" !!! An enclosed "box" which holds cartridges is a "MAGAZINE". A "clip" is what an M1 Garand uses. A "stripper clip" is what you see in this vid at 1:45 and 1:58 and 2:48, etc. etc.......and those are used to fill a "MAGAZINE" (in this case, an "internal box magazine". Learn your nomenclature, folks. It really makes a difference, and people who "know" firearms will think more highly of you if you get it right. You may thank me now. XD
WarriorPoet01 6 months ago
@tipusultan6 Didnt know they made 30 shot clips... oh 30 round magazines. Why do so many people call magazines clips? I know you can load this rifle with a stripper clip, but not familiar with a 30 round one. haha just busting your balls :) but seriously.
TNPerPunknEater 5 months ago
@TNPerPunknEater Fuckoff TnPerPunkfucker, i'm sick of you soldiers of fiction sitting in your lazyboy pretending to know it all. i made a stupid mistake and said clip instead of magazine. so what. I've been shooting for 30 years and have over 40 guns, grew up in montana and can shoot a quarter at 100 yards with open sites. i know the ends and outs of all of them. i outshot a special forces marksman 2 years ago with my ar15, so keep your mouth shut.
tipusultan6 5 months ago
@TNPerPunknEater F*ckoff TnPerPunkfucker, i'm sick of you soldiers of fiction sitting in your lazyboy pretending to know it all. i made a stupid mistake and said clip instead of magazine. so what. I've been shooting for 30 years and have over 40 guns, grew up in montana and can shoot a quarter at 100 yards with open sites. i know the ends and outs of all of them. i outshot a special forces marksman 2 years ago with my ar15, so keep your mouth shut.
tipusultan6 5 months ago
@TNPerPunknEater Fckoff, I'm sick of you soldiers of fiction sitting in your lazyboy pretending to know it all. i made a stupid mistake and said clip instead of magazine. so what. I've been shooting for 30 years and have over 40 guns, grew up in montana and can shoot a quarter at 100 yards with open sites. i know the ends and outs of all of them. I outshot a special forces marksman 2 years ago with my ar15, so keep your mouth shut.
tipusultan6 5 months ago
@tipusultan6
What's a 30 round clip? Do you mean magazine?
pickchicken 5 months ago
@tipusultan6 No sks works with a 30 round clip dude. The 30 rounders that they make for them are complete crap. Stick to the nondetachable ten
Tippet76 5 months ago
@MurderByFluoride I'm sad and your keyboard is covered in dried semen? I love your logic. You must get laid constantly.
CptSmokeAlot 9 months ago
@MurderByFluoride I wrote to you prior to this i hope you read it... But i just noticed how you spelled Intelligence "inteligence" haha Irony.
CptSmokeAlot 9 months ago
@MurderByFluoride First of all what the hells a matter with you? Secondly you're an idiot a rifle chambered in .308 is technically a battle rifle. but thats semantics and i dont really care about semantics. and I put a question mark which is signifying a question which is me saying correct me if i'm wrong. Third, why are you so disgruntled? Are you bored and/or off the meds? Seriously?? I've seen CETME .308's and they look like g3's which apparently is vice versa. But anyway you're crazy i think
CptSmokeAlot 9 months ago
@MurderByFluoride okay champ CETME .308's are .30 cal but they have about a quarter mor casing behind them. So naturally the CETME .308 (g3 clone right?) is going to be heavier. And seriously what was the arguement here?
CptSmokeAlot 9 months ago
I really like the stock but this guy shoots like an idiot
MGS2guy 9 months ago
Woah jesus christ.
I cannot contain my orgasms, this is fucking awesome!
MooseHeadMoosic 9 months ago
thats a daring move u made there,this is much more useful than the original
MrBuBu369 9 months ago
i dont know why im still watching this!? its so cheesy
pumpkinpieguy77 9 months ago
i have to say thats impressive i mean i hate bull pups with a passion but what the hell it at least looks cool
Mockingbird1337 9 months ago
yes you are right when you go to battle you would have a loaded mag the comment i made about the box being thrown out of a duece an 1/2 was not during a fire fight it was when we first got there. regardless of the box they all come in stripper clips these days and in that box they gave us they were on stripper clips but you need an adapter to fit on the magazine. which was rare to see in the field. but who even cares about stripper clips i wouldn't buy this stupid gun cause i don't like sks
coreycochran95 9 months ago
@coreycochran95
I question your experience because every box of ammo I've ever got has adapters in there along with the rounds on stripper clips. everyone i know was smart enough to snag one or two and stick it somewhere on their LBV or somewhere on their person. your wasting time loading mags one by one. just my experience and two cents.
nemesis2me 8 months ago
we didn't have boxes of ammo when i went to iraq it was in bulk either in a large box we called brass tubs or buckets we called brass buckets and loading one by one did suck we asked for stripper clips but we never got them. you can question my experience if you want but i know what i know just because your experience was different doesn't mean everyones was the same.
coreycochran95 8 months ago
@coreycochran95 didnt you get extra mags?
traceradam 8 months ago
@traceradam yeah we were supplied with 210 rounds of ammo which is 7 mags 6 mags in our LBE and 1 in our weapon that is a standard combat load but when we arrived to iraq we had 7 empty mags because you can't take ammo on to commercial flights. when we arrived to kuwait we loaded our magazines before we flew to iraq helicopter. when ever we needed ammo in iraq we went to our armory and used brass buckets. when we came back to kuwait we dropped our ammo in brass buckets.
coreycochran95 8 months ago
i think the FN should adapt the P90 to become a rifle, but still have similar operational parts. that way, the empty case comes out the bottom of the gun
MikeySpicy1212 10 months ago
would be cool if i was right handed so the bolt doesn't fuck my face up
wraith509 10 months ago
@wraith509 It is right handed
Titanium181991 9 months ago
This has been flagged as spam show
@wraith509 It is right handed
Titanium181991 9 months ago
That bolt hand 'gon take your face away.
MrJivePirate 10 months ago
wow, a muzzle break would have made things a lot easier.
mrjctx 10 months ago
Am I the only one who likes the SKS as is. It seems everyone who buys one wants to turn it into an AK, AR or what ever the hell this thing is. I think a stock SKS is a BEAUTIFUL thing!
RiverSolitaire 10 months ago 2
@RiverSolitaire
SKS's are a awesome, almost flawless weapon. but they are so cheap "I got mine for 100 bucks" that it's a easy and practical decision to mod and convert these to the owners preference. I still have one brand new in the box, never to be shot unless I find an awesome excuse to. Mod one for hunting, one for home defense, one for plinking and keep one classic and you'll still come out cheaper than a lot of decked out rifles.
nemesis2me 8 months ago