Belt CP V2

[d3adsoulja]

Real nice flying:0 ive had one for about two years first flight i had it in 3d mode it shot straight up lost control n crashed lol. Then after i repaired it i made sure i knew what i was doing and ended up stripping the plastic gear/cog so i gave up and its been repaired but boxed ever since. Great to see it fly so well:) makes me wanna get it out agen.

[Truckingmad01]

Nice looking heli, performs well too. Good setup

[LONDONUNDERGROUNDLTD]

the bird at 04:49 thinks the belt cp is a bird for a few seconds and follows it then realizes its a chopper and makes a quick get away lol

[dontbesoft]

whats the better heli this Belt CP V2 or E Razor 450?

[orangefit07]

@dontbesoft I never had any experience with the Razor so I would say the Belt CP for a starter 6 channel heli.

[Kpilot786457]

you must be a sport not 3d flyer :)

[gitarrpojken99]

Nice! Do you rekoment to by this heli?

[LamaEsky]

fajny heli 

[aussiesteveable]

Wow ! Your a skilled pilot !! I am flat out just tying to hover my belt CP - lol . I have added extra weights to my flybar to make the cyclic a little slower , and it has helped me a lot . Thanks for sharing .

[MrJohngalang17]

Does this heli suck?

[lcrt440]

Nice flyin

[MrTopsfield]

an esc button on the transmitter would be nice! ha ha

I am on my 3rd esc for my cp 2..

it now has hyperion hs2221-4400 700watt motor, kds800 gyro, hobbywing platnum 60A speed controler, power x5-40c - 90c 11.1v battery, sg90 servo all round. 12 tooth hard one on motor 3851 rpm headspeed. t-rex v3 head and tail.

still to buy kok blades + hsg-5084mg

i bought all the parts for price and performance nothing over $50 au.

I will post pictures or write on any of these parts if you would like

[tylerlchen]

what esc would you recommend?

[MrTopsfield]

@tylerlchen hobbywing platnum esc

[tylerlchen]

what esc would you recommend?

[orangefit07]

I am using the stock servos that came in it. I am also using the towerpro sg90 which are stock specs.

[danda00]

@orangefit07 What's the advantage to towerpro's as opposed to the stock eskys?

[orangefit07]

@danda00 Stock servos just plain suck! They go out to fast. The towerpros are a little better and are a little stronger.

[danda00]

@orangefit07 What's the advantage to using Towerpro servos rather than the stock Esky's? What do the Esky's lack which the Towerpro offers?

[jcer93705]

@danda00

Tower pro are pretty good I bought over 15 tower pro servos and only 3 was bad.

[loganw621]

hey how long had you been flying until you made this video

[orangefit07]

About a year.

[axelfoley09]

it's like a bird! that's what I call of the wonders of life! it's good 4life!

[NewWorldRebellion1]

put an 11t pinion on it too and a trex head

[Sharma17]

Wow!,,, I'm a complete beginner to 6ch, and have only ever had putt putt helis, I have recently got this same heli stock,, running on my own 2250mAh 25C Rhino but otherwise completely stock,,, I'm just taking it very slowly trying to get hovering with it atm, so I haven't really seen what it can do yet,, after you said that you weren't going to be doing anything crazy then took off at the speed of light,, my jaw was hanging open.. man I wasn't ready for that kind of acceleration!! :O Nice Vid!

[TheTechieKris]

sweet mods man, i have a belt cp v2 myself and love it. i'll look into those servos you changed...sounds like a good idea.

[rcfreak2493]

supa fly

[Alcadeias2]

Awesome Flight!!!

[darioffm]

very nice

[blackhawk438]

your really good at flying that.... how do you do it? i can barely control mine much less fly it like that. i can barely fly it unless i have perfect orientation.

[hasownaxe]

hi, i am new to rc helis, can you please tell me what esc is?, cheers

[orangefit07]

@hasownaxe An ESC is your electronic speed control which controls your motor and houses a BEC or battery eliminating circuit for your servos. It's like the brain of the whole system and comes in a variety of sizes ranging from 12 amps all the way up to 100amps or more.

[TheVylence]

Great Vid.

[filip500filip]

you made the best belt cp v2 clip ever

[orangefit07]

@filip500filip Thanks!

[FastSpeedDemonRC]

damn, you would look for days if you would drop your heli in those crops. hehe and btw esky is not that cheap, they are really good. just my opinion. happy flying

[orangefit07]

I have a Trex 450 Sport now!

[metalmikexx]

Nice flying.

[butty41]

man u are a good pilot/driver for your vehicles. doesnt seem like ur a novice

[heberorozco]

thats why he has the belt cp

[AZURERACE]

It looked very quick. I only fly my belt cp v2 slowly on idle up. See my vids

[538457142]

u have no vids u flying the belt. ur vids suck

[orangefit07]

HATER!! That's cuz I don't have the belt anymore. Get a life.

[538457142]

Sorry dude wasnt talking to you. I was supposed to send it to AZURERARE. Your vids are great

[orangefit07]

oh ok

[gmeister07]

Nice video, and nice flying i just bought one (prolly not spart cuz its my first heli ever but i figure go for the gold baby ! :P ill prolly be emailing you in 4 days with setup question lol

[armanish]

Do you need to configure anything when you upgrade your esc? i just burned the stock 25A esc and im looking for a better one. What's your suggestion?

[orangefit07]

You don't have to configure anything. You only have to setup the new ESC. Just buy a new 30 amp and it really doesn't matter what brand. The one I have on my belt is an exceed rc from xheli.

[stormranger6]

damn, i wish i was a fraction as good as you flying the CP V2...i can barely get off the ground.

Good skills, cool video and commentary, excellent landing and good save on the kid. the belt cp would have torn up little knees like paper. well done sir.

[orangefit07]

Thanks! Yeah it took me a bit to get up to that level but now I am rockin' a trex clone. I will be posting another video soon. Now I can do flips, loops, and tic tocs.

[stormranger6]

can you do some trim and adjustment video tips for the belt CP V2 ? that would be great as i coulnt find anything for it except for nuttcaze. My fwingman louisxp1 did the metal rotor head upgrade for me and finally got the tracking squared away.

[orangefit07]

Sorry but I won't be able to seeing how I don't have that heli anymore.

[YourFriendlyMe]

sweetest vid on yotube about te belt cp v2 so can you list me the stuff you bought for your heli

[XenoNorway]

Hi, have the same chopper. Had it for 1 month now. I like it pretty much. Good and stablil. The gyro holds reasonably good, drifts a bit but not too much. For the price im satisfied. Havn't tried the stock Esky radio but using a Futaba 7C. Had to much trouble with the radio on the Esky HBK2. Actually its more fun than flying my twice as expencive T-rex 450 PRO. Cheap parts isn't a drawback. Why did you change the stock gyros? I find them pretty good actually.

[orangefit07]

I never changed the gyro on this bird, it is the stock gyro that came with the heli. Yeah it was fun when I had it but now I have moved up to a trex clone. I like it way better than the belt cp.

[Daniel33Kleve]

Very nice Video good job

[Twister773]

awesome video and great flying, thanks.

[akodin02]

are you in idle up when doing the flight???

[orangefit07]

No I am in normal mode.

[orangefit07]

Thanks!

[MrDavetg]

What kind of rotor blades do you use exactely (325 carbon ??) . My belt cp v2 is just out of the box with 2 times hovering (Iam at the beginning,,,,first crash already behind me) . But I am becoming better......so it was great the 3D performance of you..!!

[orangefit07]

They are 325mm Carbon blades

[orangefit07]

Yeah it is the stock 2.4 ghz radio.

[RcAntax]

nice vid, is it 2,4Ghz stock?

[hojo2011]

My cp v2 use to have these huge twitches, but i fixed it by twisting the servo gyro wires.