Nice truck, but if you are pushing 18psi, I hope you have head studs. 15psi is really pushing a 7.3 with stock bolts, a set of ARP studs will keep the heads on the motor and out of your lap.
@12gauges The stanadyne pump used in the 6.9s won't flow as much fuel.. and DPS sells a "race quality" pump, if you are cheap, you use the later 1700psi pump with earlier 1400psi injectors.
ive got the timming advanced 9* pump maxed out a set of DPS Inectors and im running roughly 18PSI of boost. i have a full 4" dual MBRP exhaust and a custom K&N Air Intake. ive got a new set of 33x12.5x16 BFG M/T K2 Tires on the same rims. the rims look horrible in this video all faded but when i polish them there shiny like hell. thanks for the comment.
where did you find the custom K&N air instake???
CForeman50 2 months ago
what's the fucking fuel consume on that thing?
flammenmeer3 2 months ago
There was more smoke from the exaust then the tyres.... -_-
DizzyMan24 4 months ago
have you had any badluck out of your dps injectors?
longhorn795 7 months ago
Nice truck, but if you are pushing 18psi, I hope you have head studs. 15psi is really pushing a 7.3 with stock bolts, a set of ARP studs will keep the heads on the motor and out of your lap.
sycostang67 1 year ago
@sycostang67 i hope your joking
ive seen 7.3s at 30psi on stock studs without isues
jmanwild 6 months ago
@jmanwild u havent seen a pre powerstroke idi there dip.
evo8mrman 6 months ago
@evo8mrman i've worked on plenty of pre-powerjoke idi's.
jmanwild 6 months ago
Nice looking truck, but no way your 18psi boost,
Im run a little over 19psi in my truck and theres no smoke
check it out yourself 6.9 diesel burnout
12gauges 1 year ago
@12gauges The stanadyne pump used in the 6.9s won't flow as much fuel.. and DPS sells a "race quality" pump, if you are cheap, you use the later 1700psi pump with earlier 1400psi injectors.
TurboIDI 2 months ago
nicee...
beetleboy96 1 year ago
ive got the timming advanced 9* pump maxed out a set of DPS Inectors and im running roughly 18PSI of boost. i have a full 4" dual MBRP exhaust and a custom K&N Air Intake. ive got a new set of 33x12.5x16 BFG M/T K2 Tires on the same rims. the rims look horrible in this video all faded but when i polish them there shiny like hell. thanks for the comment.
CustomDieselINC 1 year ago
@CustomDieselINC 9* at what rpm? I set mine at 7.9* at 750rpm
TurboIDI 2 months ago
nice lookin truck. not so big on the wheels/tires, but clean lookin truck. guess u got the fuel turned up? lots of smoke.
mizzou1990 1 year ago