Solution: Pokémon Yellow Edition Loaded On Pokémon Stadium 2 With n64 Transfer Pak Emulation

[Raeleka]

I have everything but when I go to "controller pak" I cant find "Transfer Pak" it just does't show up, Help!!

[tenacious1884]

@tenacious1884



[IceKitsuneColdHebi]

Dude, Missingno invaded your desktop. I'd set it up for restores. ^w^

[OverTheHorizonPwns]

name of song pl0x?

[HyperDragonDemon]

thank you so much for the links. now i can go make my pokemon stronger and defeat all pokemon tournament! but can't go on this gameboy on pokemon stadium on n64. well it's okay. i went on visual gameboy advance. later on pokemon stadium i still got save on my game boy with transfer pak.

[Darkstorm31]

Thanks!!!!!

NRage 1.83 is garbage. 1.82's the deal :P

[michaeltheiii]

I'm getting a save file that says this:

???

ID *****

Saved file not found.

Help?

[TheDinosaur64]

its not letting me see tranfer pack

[jtd8391]

Thanks that helps alot cheers

[ShahzaibShaban]

awesome man thanks alot

[ChrisTheBest1992]

when i must serach for the ROM file,i cant find it,and it is supposed to be GBC file,but when i look for the save file (which is SAV file) this one works,so thats means that im missing the GB rom and my game doesnt seem to have a GBC format,PLEASE HELP

[tenacious1884]

I'm sorry for not responding every comment :( I've been busy with college and I don't know most of the issues you guys are getting while trying this, wish others viewers can contribute to your Q's and Problems :(

[tenacious1884]

@RotomOverHeatz yes, I will do it soon with camtasia next time, I know it's difficult for viewing cos of my crap recording pc, i will soon :)

[LloydPacalypseNow]

Uhm...is there a way to play the game in the Gameboy Tower

[PhrikaPhresh]

When I am picking pokemon Rental pokemon work, but my pokemon if i click on it it freezes.

[THEGREATMAX]

Causing any changes to my Yellow data, other than trades, through Stadium, causes my data to become corrupted… so I can’t use items on my Pokemon through stadium, and I can’t give myself Master Balls that I got from Red… and worst of all, I’m afraid I won’t be able to earn my Surfing Pikachu.

Someone please help!! Red and blue both work fine!

[333ShadowFire]

I was about to comment and complain that it didn't work, but I looked through the previous comments and read the description and realized that it only works with version 1.82a of the NRage plugin and not 1.83. Now it works, so thanks a bunch!!! :D

[maestropokemon74]

dude i do the same you do, and the Transer Pal doesnt appear

[Arjunthiraviam1]

I have p64 v 1.6 with n rage plugin 1.82a and vba 1.80beta,

I save the pokemon yellow game and export it (.sav) {save type is flash 128k]

then i have choosed the respective gameboy file and gameboy saved file in p64,

But still i get ID ***** Saved file not found

i have working on this for almost 3 weeks

PLEASE HELP ME, I BEG YOU

[fangwenstefani]

@Arjunthiraviam1 me to :C i need help

[patodanilo]

can i load a data that alredy has all the pokemon lev 100??????? i dont wanna play gba again :(



[MegaWolfman49]

I have a question that everyone else seems to get. Where is the sav file? i searched my entire computer for it and found nothing. I found the sav for my gba but not my gbc. im using flash 512 kb if thats important

[OSUbuckeye2321]

Whenever i save in game it doesnt actually make a new save. I can only save through the vba menu and ive tried converting those saves to .sav and .sv and my game still says that there is not save file for my game. Can someone help me please ive been working on this for hours

[tenacious1884]

@OSUbuckeye2321 hi man, well as you can see from metaridley92 comment, u can't convert the save states from the vba menu to .sav

check if in option-> emulator -> save type. and the see if it-s on flash 128k

Im aware of ur problem let me know mate

[OSUbuckeye2321]

@tenacious1884 Ya i already tried that but I got it to work now so its all good. It just turned out that when i downloaded the latest version of vba it was still using my older version when i opened my game so it wasnt saving correctly haha so i was just being an idiot. Thanks a lot man, great vid.

[PhrikaPhresh]

@tenacious1884 What you do is you press file > export > battery file. It makes a SAV file

[michaeltheiii]

@OSUbuckeye2321 This is how. In VBA, after you save, goto File>Export>Battery File

This should create the .sav file if it's not aleady there.

[tenacious1884]

@TtWarWolf sorry for replying too late, well u have to download the nrage plugin, links are on my description, once u download the .zip file containing the nrage plugin, put it on the plugins folder that is inside the project64 folder. 

[megaultrasupergamer9]

everything works fine for yellow but when i get pokemon staduim 1 my controller does detect the game but is says there is no save file and i cant choose my pokemon some one plz help

[FinalArcanen]

Can someone help plz? I have nearly everything perfect but for some reason it will not recognize my save file in stadium it tells my ID ***** save file not found... I've seen others have this problem but I've used different emulators with different updates to them tried saving at a pkmn center(like that would do much?) and nothing is working, really really sorry if this has been asked a lot but man nobody has a solution that fixes it for me

[tenacious1884]

@FinalArcanen hmm well I know there a ppl with same issue, have you loaded the rom and the .sav file? be sure to have 1.82a plugin from above the description

[FinalArcanen]

@tenacious1884 it works on my other computer fine lol for some reason this one just doesn't like it XP anyways problem half solved

[Metaridley92]

@tenacious1884 about the save file. Visualboy Advance saves as .sg1 files. I've tried renaming them as both .sav and .sv and I get the same issue as FinalArcanen. Is there another directory where you find the .sav files? I have the save states and emulator on my desktop... I've been at this for hours can you please help me if you can?

[Metaridley92]

wait. nevermind lol. I was using the wrong save file I was supposed to change the sa1 to sav not the sg1 to sav. wow all that trouble for such a stupid little detail lol.

[tenacious1884]

@Metaridley92 good friend ! and it's ok as ur comment will help others that may have same issues even for little details, u're welcome :P

[Metaridley92]

@tenacious1884 hopefully, people will be smart enough to look through past comments to find answers BEFORE they go bothering the creator of the video. lol

[tenacious1884]

@Metaridley92 haha no dude, I don't know abt others, but I'd never feel bothered :P thanks 4 comment!

[Metaridley92]

@tenacious1884 I figured it irritated you that people kept on asking that certain question over and over since it seemed like it in the description.... Idk...

and no problem dude it was a good vid it helped me a ton.

[tenacious1884]

@Metaridley92 well I don understand u a bit, ok, remember u have to save the rom from the 'in-game' menu, not directly from the visualboy emulator's menu. good u fix it now lol

[Metaridley92]

@tenacious1884 yeah. It took me awhile to realize that the save states made their own save files while in-game saves made their own separate file as well. The .sg1 files are save states and the .sa1 files are the in-game saves. That is what I meant to say.

[TheMysteriousman3]

not usre if its only me but the nrage link just gives me the nrage 1.80a not the 1.82a. i tries with the 180a but theres not tranfer pak option

[iamjonathanpatric]

How can I turn off the NRage thing?

I get something that says turn off controller deck.

D:

Any help?

[tenacious1884]

@iamjonathanpatric Hi, when u get that message? D: ? try un-checking rawdata option under controller pack tab, tell me more details, the rom maybe corrupted sometimes D:

[johnsnake71]

@tenacious1884 1:08 My thing doesnt look like that :(

[tenacious1884]

@johnsnake71 u sure u have n rage 1.82a ? check the raw-data option to see if that works, don-t worry im here for anything dude

[johnsnake71]

@tenacious1884 I FIGURE IT OUT THX

[tenacious1884]

@johnsnake71 save pokemon yellow (ok, .sav file created), open project64 or tgb dual, and load the .sav and the rom file under ''controller pack'' options and u're done. thx 4 comment! :)

[ChampionRevilo]

What plugin did you use?

[tenacious1884]

@ChampionRevilo

"NRage Plugin needed: 1.82a (Note: As far as I know, only works for THIS version)

I didn't have luck with the recent version 1.83" -look for the vid. description for the link. thx for comment :)

[DarkLeach7]

TGB Dual works as well

[tenacious1884]

@DarkLeach7 with yellow? I haven't used tgb dual yet D:

[tenacious1884]

@PokemonSilver99 OK man! no prob! glad it worked to u, and no, thanks to you for comment. :)

[tenacious1884]

@PokemonSilver99 Hllo, hmm.. tell me your plugin version you use, remember checking the "Raw-data" option to let you load rom and .sav file and tell me later. thx for watching.

[tenacious1884]

@jgaz1516 glad it worked, just could not understand why it doesn't work for others :\ thx for comment! :)

[MasterAvery]

help save file not found!

[tenacious1884]

@MasterAvery sorry been very busy these days, u followed steps in my description if not, then start downloading the right plugin (Nrage1.82) from here. if u did all, send me a pvt message and will post here on comments too for a solution.

[MasterAvery]

how do i put it so i can put my yellow rom in

[ParkinLotPimpin816]

Anyone know how to "save at a pokemon center"? The game keeps telling me I have to save at a pokemon center but there isn't one in the game.

[tenacious1884]

yes, just at the title says "save at a pokemon center"! hehe just when u are about to save your progress be sure to be in a pokemon center (where you heal you pokemon!) just as simple. :D thanks for watching and asking! Have a nice day.

[ParkinLotPimpin816]

It works greatly for poke stadium 2 but i can't quite get it to work with poke stadium 1. Great stuff nonetheless

[tenacious1884]

@ParkinLotPimpin816 well it should work, worked for me, and for other ppl here like @dougfancy101290 what problem u got with pk1 ?

[ParkinLotPimpin816]

@tenacious1884 I got it to work this morning for both so everything is cool now! haha thanks for the vid

[tenacious1884]

@ParkinLotPimpin816 :D

[dougfancy101290]

Thank you so much! My Yellow works on Pokemon Stadium (1) now! :)

[Superunknown190]

I have red working on Stadium 1, is there a way to get Yellow to work too?

[Pika740]

It says save file not found for my Yellow version.

But my Crystal works just fine.

[Gomezchr]

hey the plugin only gives me memory packs and rumble packs whats up with that

[coollein]

Do you know how to transfer meboy save files to a computer! If I'm only connecting it directly it will only find .rsm files and the project 64 or the vba can't open those!

[tenacious1884]

Hi, sorry to tell you but, you can't, just as simple, meboy's save files are not compatible with vba's save files neither pj64's. Even if you try to change the extension from .rsm to .sav or .sgm you won't have luck, will pop-up an error message in vba or just won't load progress. BUT It works in the other way, Meboy supports .sav files from the pc to cellphone. And nothing more. Thanks for asking.

[coollein]

I doesn't play gbc and older on the computer, so I don't have any good pokemon on the computer. =( Nice video anyhow! Since it should work with Mario Tennis too, I'm going to try that instead

[PredatorXdread]

i want to transfer my one pokemon of; RED over to BLUE, how can i do this exactly? plz help

[coollein]

If you open 2 vba's they connect automaticly

[PredatorXdread]

okey thx :D:D

[Lkynmbr24]

Dunno if you saw my last comment (Which I quickly deleted having to do with that I.D. ??? and #***** prob, but I did read the description and had probs with nRage's 1.8.3 So I'll use 1.8.2 as you suggested, lol. Though oddly (I use a contoller) 1.8.2's Directional Pad (Up) input won't work, which I find odd... I'll just xfer and then switch back, thanks for the help man =]

[tenacious1884]

Yes, I did saw your last comment, but it's ok, thanks for letting us know that nRages 1.8.2's Directional Pad (Up) on a controller will not work! And yeah, you should use plugin version 1.8.2 for the yellow version in order to be recognized by pkstadium2. Glad to help.

[Lkynmbr24]

I also found a simple fix for the directional pad problem, especially using xpadder. Just assign the arrow keys on the directional pad on the controller and assign the directional up pad in nRage with the keyboard arrow key (up) and it works on the controller as well! ^^

[MegaZeroXZ1]

Thank you so much for this. I love the 1st gen pokemon games and i lost my blue cart when i moved and misplaced my transfer pack in the house i'm in now.

[OldAS220]

Would this work in Mupen 64k?

[ZzIiGg10]

How do i control the stadium couse i tried all keys and none do it well x or a=start and c=back.nothing more

[Juni2788]

dont worry i fix it LOL

[Juni2788]

the Kimono girl will be appear and will explain the turn your n64 off and then i restar the game and will be happen agian T.T

[Juni2788]

i have a little problems i cannot play all my pokemon version Red Blue Yellow Gold Silver Crystal all that he say is something about Flash ram and my laptop is a Window vista can work on vista??? but today i found all process to instal my Transferpack i made it so far but went i will play Pokemon Stadium 1 & 2 ok i enter the game only say Pika----!!! and i cant play T.T

[damientai]

why i cant see the plugin nRage's 1.8.2a can it be download?

[tenacious1884]

Ahm, you can download it from my vid, Clic on "more info" from the right panel to show the full info, there's the direct link to the nRage's plugin 1.82a download. and also the links to the n64 roms and emulator. See ya!

[bosybosyboy]

Sorry But I can Play Pokemon Red Fire In It ?

[ghostschiphon]

newp, thats why you cant link them, nintendo changed how stats, damage, and critical hits were calculated so the game arent compatible

[everlok2008]

hey i just wanna know where do i find the plugin folder? i downloaded the plugin but when i go to settings on my n64 it doesnt show up! help :(

[tenacious1884]

It is located in the Project64 folder, after downloading the plugin, you need to extract it in Project64/Plugin folder, means that, the Plugin folder is inside the Project64, so extract the .dll file there. good luck.

[mewmew249]

fucker!!!!!!!!!!

[nani2416]

nice man you are incredibile

[immortaldave]

You my friend are a gentlemen and a scholar! I had no idea that you needed to have the older plugin in order for yellow to work!!! Thanks a million!

[AlbBoy15]

focking thanks man

I can't thank you enough!!

[AlbBoy15]

heey I have a Question :

at 1:29 it says ''please save at a pokemon center''

Do you know how to solve that problem?

[tenacious1884]

LoL, that's just a simple one, when you are playing whatever pokemon version for game boy color, just right when you're about to save your progress, be sure to be in any pokemon center. That's all. I guess you already know what a pokemon center is? where you heal your pokemon. Every city has its own pokemon center. hehehe. Try it and.. bye bye orange letters! xD.

[muffinpimp47]

hey i do everthing you say on the vid but it says SAVE FILE NOT FOUND at the menu screen on pokemon stadium 1 can you help me

[tenacious1884]

Ok, what gameboy rom are u trying to load? might be two causes, you are using the wrong plugin version, remember works only on the 1.82a, to be sure, download it from here in the description, and second, might be the Pokémon Stadium 1 ROM you are using, I tested it from romhustler's. Which you can download it from the link posted in the description. Check if that works, but trust me it works for both P.S 1and 2. I didn't get the save file not found message. let me know any problem.

[retroman51]

paradise (1st mix)

[twistedsrp]

whats the song

[tenacious1884]

The video quality is not very good, watch in HD to see a little more clearly video. Recorded with camstudio on low quality and high compression. Sorry