Review for Dboys M4 CQB-SD DX

[NorStarReviews]

Would this guns gearbox blow up stock if you tried to run a 11.1 1300 battery?

[bogdan192]

@NorStarReviews

Mist likely yes. Well not blow up per se, but the trigger contacts will probably be burned. 11.1 Lipo + MOSFET = LOVE tho.

[SamWazamTV]

Is this a good gun for a beginner like me?because I really need to know before Christmas.

[bogdan192]

@SamWazamTV Treat it nice and it will reward you with many kills. Misuse it and it will be a piece of junk in no time. Beginner gun... I don't know. If you're after reliability out of the box, one of CYMA's new AKs will probably outlast it no matter what you do to it. But if you want a full metal M4 with trades and upgrade potential that comes at a low price, you can't beat Dboy's offer with this replica.

[TheAgletMaker]

im probably late to tell you this,but you solve your barrel wobble problem by rotating that rim shaped thing behind the heat pads.



[JEFFTHEWRIGHT]

Is this the 3081D?

[chellis151]

Where did you get the holo sight?

[STARTairsoft780]

How do you take off the silencer?

[Danksta69]

Where did you purchase this from?

[bogdan192]

@Danksta69

crw-airsoft.

[laurenceKJ]

i heard that some parts of the gun "wiggles" is that true, cuz i was thinking about buying it

[popacapwhiteboy]

how many bebes does that clip hold

[Doomcommin]

@popacapwhiteboy Yeah how many baby's?

[M1st3rm1g00]

SUPRESSOR NOT silencer... UHHG

[nipponia1]

very nice gun

[MsCopout]

nice man what u see in iraQ any deathes

[1231231231231231able]

What type of BBs do you use?

[bogdan192]

@1231231231231231able

.25 for woddland (or areas where wind is an issue) and .23 for indoor. My personal preference is the JBU brand, they seem to be well enough polished and good quality, as well as cheap. But you can use whatever brand is available as long as it's polished.

[chellis151]

is this gun still operational? If so have you upgrade it?

[bogdan192]

@chellis151

Yup, still kicking strong. Hop-up rubber needs a replacement tho, it shot through more than 30.000 bbs since it was installed. Air group and gearbox is fine.

No internal upgrades since purchase. Only one 9.6 battery and several externals added.

[chellis151]

@bogdan192 Good to know thanks. I have the CQB-R version without the silencer and i wanted to make sure I made a good investment and what i needed to do to maintain it.

[maika0staretza]

bun review bog, oare intre timp te-ai lasat de airsoft sau ce arme mai ai? mai posteaza !

[bogdan192]

@maika0staretza

Intre timp am facut burta si cearcane. Mai este jucarele, dar nu mai este timp.

[pillarpastor]

Great Review!!

Has anyone ever measured the inner barrel of this gun? I need to know how many mm it is so I can order a tightbore.

[fanofCOH]

my G&P m4 cqbr > this cqb thing

[k1ng92]

i bought this gun and used it twice before i sold it. i really dont care what people who are biased towards crap guns say, but from an honest perspective these guns are bad. there are so many parts that are bad out of the box, the finish isn't nice, and it fires like shit. really just save like $20 more and by the same m4 variant made by g&g and if possible save til you can afford a G&P, KWA, or VFC and then you will really get a great value

[dragonfire77721]

@k1ng92 A Dboy is a cheap STARTER gun ASSHOLE okay, of course VFC or KWA evern G&P are good but there expensive. You won't save "20 dollars" you'll save 250 dollars. G&G is also a good gun to buy but it doesn't come with a battery or charger

[k1ng92]

@dragonfire77721 i consider a starter gun a good gun, and no airsoft site advises its buyers to use the battery and charger that comes with a chinese gun, so most players buy a battery and charger regardless of if it has one. and if you think your saving money then consider that the G&G m4 is $40 less than this gun, meaning for the same price you could get a better gun with a better battery and a better charger.....and you lose money with dboys compared to high end guns with repairs

[marine3200]

@bogdan192 where did you get it from

[FingerboardPr0]

how much does it weight??

[hogaru]

remove the suppressor and ris rail and there should be 2 washer where the delta ring would be.... that should take the place and same amount of space as the 2nd washer but hold it in place

[petranigtarm14]

what are the proper parts to lube on this gun?

[bogdan192]

@petranigtarm14 You need to use silicon spray in the mag well (on the feed tube), in the mags (spray in a few times and fill the loading tube with bbs), on the inner barrel and hop-up. Doing this will cause the hop-up to be ineffective for the first hundred or so bbs you will shoot (untill the silicone oil is spat out). Lubing the gearbox every 10k bbs is also a good idea but I myself have never done it.

[PS3freak135]

have you figued out how to fix the ris yet?

[bogdan192]

@PS3freak135

Duct tape on threads is what i'm using now. Still has some play bu not nearly as much as when it arrived. Can go for a RAS fix device also.

[mdorestis]

is it reliable?

[shadowx7og]

yeah well the wholl front is moving because you keep putting it down with the barrel first........

[MrAUSTINJACK]

@shadowx7og you are right if you know how to properly handle a gun or as this guy says a toy you do not put the barel down first lol

[MsMoneyman12345]

Does it seem more than 330 or is it like not powerful or accurate

[bogdan192]

it's more than enough for CQB and good for woodland games with a new hop-up rubber.

[MsMoneyman12345]

how much fps does it have with .23 gram bbs

[bogdan192]

Last time I chronoed it did around 120m/s with .20g. I'd say ~110m/s with .23. That's about 330 FPS.

[threewoodenxs]

its not a toy

[apamburn]

@threewoodenxs ummmm....yes, it is. If it weren't a toy, it would be called a firearm.

[nintendofann]

@apamburn actually, depending how serious you are about airsoft, it is a simulation weapon.

[harrisdoan9s]

how much does it cost and where you buy it and i`ll give you$20 dollar for you if you want to

[jackapulco]

I have the same AEG. I use to have the same problem with the front part unsrcewing. What I did was remove it, place a couple rubber rings before the screw and screw it in tighly again. It has not moved ever since!!!

[PS3freak135]

where did you get this?

[cobraz22]

Your problem is that the front assembely isn't tight you will have to twist the connecter part that connects the front assembely to the back assembley after that it shouldn't give you much problem I had the same happen to me when I had a m16a3

[Maximalnoob]

german camoflauge

[hedlessniper]

At least get a mock silencer if you're gonna have one on there...

[ultimatevideowatcher]

One word bro, for that problem you have. You need a rail stablizer, it should make sure your rail system does not move at all :D

[chaz3345]

could u plz plz take the silencer off?

[noddyelite]

i have the exact same gun exept i have a red dot acog.........i also have the same camo that u can see in the background

[xcr1msonx]

is this a reliable gun? and what is the fps?

[bogdan192]

@xcr1msonx: It's as reliable as you make it. Same goes for any airsoft replica (maybe except Tokio Marui). Shoots around 120m/s in stock form. That's ~360FPS.

[xcr1msonx]

nice, thanks alot.... just wondering if u can make another video of you shooting the gun maybe 100 feet away from a target?

[BlackFalcon117]

@bogdan192 what do you mean with "maybe expect tokio marui" ?

[tomibreg]

where do you keep the bateries in the gun

[bogdan192]

@tomibreg The batteries are stored in the clubfoot stock.

[tomibreg]

thanks

[PS3freak135]

Did it come with the vietnam style magazine?

[bogdan192]

The VN-Style mag is from a SPR Mod0. It wasn't in the CQBR package. YOu can buy them separately. I tend to like them more then normal STANAG type mags because the toy is more maneuverable.

[hezabimu]

are you sure the stock are abs plastic? or is it nylon fiber? i find abs plastic as an automatic put down if i am deciding on buying a gun.

[bogdan192]

@hezabimu The collapsible part of the stock is ABS plastic. It's quite sturdy and has taken it's fair share of abuse over time. No problems with it so far. The buffer tube is metal.

[MrAUSTINJACK]

@hezabimu Just so you know abs plastic is used in most real guns now days your glocks and xd's have abs plastic frames but the abs plastic does crack on these guns cause of the way you use

[emkplayboy6]

Very nice gun does the silencer come on n off?

[VIPhiggz09]

does dboys gearboxs come with nylon bushings

[bogdan192]

Older versions yes. Metal 7mm bushings now come as standard on newer versions.

Mine came with nylon bushings but it's still as good as it was when it first arrived. It's been through more than 20000 bbs and now it's running on a 9.6 battery, no gearbox issues so far.

[subireza]

Where can I get this in the states or will CRW ship to the states?

[subireza]

Please tell me someone in the states sells this gun, it's 86 dollars to ship it stateside.

[bogdan192]

You can get the D Boy Full Metal RASII CQB (the non-silenced version) off airsoftgi for $190. For the silenced version check out evike (they only have the version without trades).

[joehavian]

D BOYS ?? u referring to Delta Force???

[jollygunner]

dboys is the name of the airsoft company tht made the gun

[FDNYDCFDfirefighter]

Is this gun the D Boys M4 RIS CQB? Cuz it looks exactly like that, if it is do u recommend this gun to a begging???? Cuz i really like the gun

(I also really like the USMC markings)

[Jurneyz]

nice review... great gun.. i just ordered this gun with a normal m4 front assembly, upgraded internals, a marui hop up and a acog red/green scope.... i'll be posting a review of it soon after it arrives

[airsoftpanda]

1:18-1:21, lol pretty fuckin nice eh

[bogdan192]

The replica comes with a normal M4-type Hi-cap that holds 400 rounds. The VN-type mag is bought from rsov.

[scottycatman]

where did you get it?

[bogdan192]

crw-airsoft. you can find their channel on youtube too. User name is crwairsofthk.

[REAPER3382]

dude dose that mag come with it and a bannana mag or did u buy the mag and PS i typed this on mah lotis

[almightyhaggis2002]

i would just like to point out that was not the gearbox that was the piston assembly the gears are underneath it.

[VIPhiggz09]

it has a mauri hop up

[lllWitchKinglll]

Does it comes with the front ironsight?

[bogdan192]

It only comes with a rear iron sight. You need to add an aftermarket front sight if you want to use iron sights. I just took off the rear sight and mounted a riser and a holosight.

[bogdan192]

Well you can either use a battery discharger (search for them on any airsoft online store) or you can improvise something with a CPU source fan and some wires to discharge a normal Ni-Mh or Ni-Cd battery. Basically all you need is two wires and a device to turn electrical current into movement or heat. Never try to discharge a Li-Poly battery (they will stop working if they discharge below a certain voltage).

[chimiconga]

are the markins engraved or just painted on

[bogdan192]

Markings are laser engraved. After a yer or so of monthly use they haven't faded. Only thing that happened is that they got a yellowish tint (prolly due to dust and dirt).

[TheAirsoftbeast22]

is this gun reliealbe to not break after a year at least

[bogdan192]

If you treat her right, it'll serve you right.

[TheAirsoftbeast22]

how should she be treated? i need her to last for me

[bogdan192]

Tighten screws, clean the inner barrel, don't mess with the internals (unless they break), use quality bbs, store it away from dust and dirt, don't drop it, throw it or kick it, charge the battery before every game then discharge it after the game, lube the hop-up and inner barrel monthly with silicon oil, clean the mags so they won't missfeed.

[paintbalr09]

can u take the silencer off

[aaron108536]

I've seen the same models of this gun but it does not have the markings on the sides... why?..

[bogdan192]

There are 2 versions. One has markings the other doesn't. The one with markings is usually 10$ more expensive.

[aaron108536]

Oh. Well i have another question, where did you order it?

[TheAirsoftbeast22]

yo how much wa the silencer/surrpressor and where

[bogdan192]

Silencer came integrated with the replica. It covers the inner barrel. I don't know if dboys makes any spares.

[littlecheckerbox]

however, you can get the same thing from a different company.

[0pinion8ted]

Hey was just wonderin is the silencer removeable on this like the similar model by G&G?

I cant wait to get the cash so i can get me one of these baD-boys!!

[bogdan192]

It is a direct clone of the G&G. The silencer is removable.

[TheAirJockey]

pretty fucking nice eh

lol nice review

[asahloth]

ich hab die auch aber nicht die sd-dx version sondern die normale ist sein geld aufjedenfall wert habe keinerlei probleme mit der waffe und meine hat 1,7 j weis nicht welche du hast .... aber meine kann ich nicht auf automatisch einstellen von daher gehe ich davon aus das du vill die 0,5 j modell hast kann das sein?...

[theguitarhero3]

becarefull with the green lazer, it damages eyeballs more then the red ones do.

[TylerSkater14]

i just did basically all that to my ics m4 lol except upgrades same external add ons rofl

[eXxtR3mloveHouse]

Schlechtes English :D

[Zuaarle]

What laser is that (make and where it was purchased)?

[Sn1peR999]

I hav a solution for your problem, It works for me. Put a rail cover going from the top front RIS to the main top rail on the upper reciever. Send me a message if this helps. Regards

[moviemadness07]

thats smart!

[Aaidas2]

dboys guns are good or not good because I heard some ppl saying that the metal ones are very cheap metal and the internals breake rly fast

[bogdan192]

Buy one and you'll find out for yourself.

[Aaidas2]

Its my first gun so I want to buy a good 1 that will not break in a year or so. SO how good is the metal and plastic?

[bnsfmodeler343]

if you want one that wont break, get a KWA, G&G, G&P, ECHO1, or SYSTEMA if youve got the money for a SYSTEMA.

personally ive got a ASGI Custom KWA M4 CQB. and a G&G CQB-S M4.

i like both of them, and ive had both for over a year with no problems

[Curs3dz]

Not really fast, but yeah, there are better companies out there.

[luckykingtattoos]

Hi, What is the barrel length on this replica?

[bogdan192]

It's the normal M4 inner barrel (~270mm I believe).

[ilovealtorock]

no i believe thats it is 247mm. this is a cqb. common mistake. gt a dees customs barrel if you are upgrading

[KibblesKapture]

The silencer is detachable? Will it look like a regular M4 with the silencer deteached?

[bogdan192]

The silencer is detachable but it acts as an outer barrel. If you take it off you will expose the inner barrel. It will look like half of an M4 with a brass tube sticking out.

[YugenInc]

can you just pull the orange tip off the gun's silencer.

[cpk93]

that can probably be fixed by buying an M4 front end though.

[lillarsher34]

Where can i buy this gun? I've been trying to find it on a site but cant.

[ddogthomas]

i have had this gun for awhile now and i cannot get the silencer off. Do you have any suggestions?

[bogdan192]

rsov, wgcshop, crw-airsoft and gunnerairsoft I believe still have this model.

[jonleeisag]

how do you take off the silencer? just unscrew? clockwise or counter?

[bogdan192]

The silencer can be removed by unscrewing clockwise as you are looking at the barrel I believe. Be advised that the silencer is made up of 3 parts: the part that fillets and covers the inner barrel, some foam and a metal part that covers it. This last part can be unscrewed by turning in the opposite direction (anti-clockwise I think).

[dogabutila]

Do they glue the silencer in? I tried simply unscrewing mine and it doesn't work.

Part of the problem is that the RIS blocks access to the part of the silencer that screws in, while the silencer locks the RIS in place. I tried taking the front off the gun, but apparently i cant take the RIS off from the back either.

[LUCANATE]

im having the same problem. SOMEONE HELP!!

[dogabutila]

@LUCANATE I did actually get it off. It requires removing the upper receiver and then taking the rails off. Once you get the rails off w/ upper receiver, just diesel the thing. Heat gun might help. I ended up putting in a outer barrel extension and sawing the rest of the inner barrel off. Sand it down etc, TM tracer.

Put a H nub it in at a lipo and its good to go. It was a bunch of work but its worth it. Look to add a lipo and an eotech replica.

[LUCANATE]

im trying, but its not working. But thanks anyways. Should i try anything else?

[MrAUSTINJACK]

@LUCANATE try ruber O rings or some lock tight

[bogdan192]

This question has been answered about 10 times in the comments.

[pregnantnproud]

good review.

[ZachiD14]

Yo Nice gun, looks good :) Where you get it from also... i was thinking about getting a Boyi Dboy *Full Metal* M4 CQB-R from land warrior for 149 pound, any other suggestions or?

[bogdan192]

I bought it from crw-airsoft. 149 pounds sounds like a decent sum. Especially if it comes with a warranty and cheap shipping. For me, the shipping was about 80% of how much the toy costed.

[lockpicker2k]

STOP CALLING IT A TOY DAMMIT!!!!!

[MischievousIQ]

Seriously, this is definitely not a toy in the sense that it can hurt you and not intended for children. "Technically" these guns are not even for those under 18 years of age. Toys are those clear POS plastic guns they sell at Walmart.

[bogdan192]

It is a replica. A toy for airsoft games. It's not a "gun" or "carabine".

[RABBITSMOGET]

i had the same problem with my D-boys SPR!!.. butt i didnt just go around.. butt up and down aswel.. i tok the whole gun into pises and found out there was a bad weld...  so i traded the gun to a AK my friend builded for me... that sure help my problem... but... nice gun =) i hope you can fixe it ^^

[pregnantnproud]

g&p are better right?

[bogdan192]

G&P are more expensive and are pre-upgraded to perform better, but in my humble oppinion, the difference in price does not justify the extra quality. I've seen G&Ps strip gears and motor teeth because of mad ROF (as they come stock form with better ROF).

[thehill2240]

what kind of battery do you use and how long do you charge it?

[TheStol]

Wait... did you say METAL HOLOSIGHT?!?!?!

Boy, you need to check google at once.

[bogdan192]

Holosight = holographic sight. The one attached to the M4 in the video works exactly like EOTech similar products (by using a diode to project a hologram on a dichroic mirror). The device is made out of metal, therefore you can call it a "metal holosight"

[TheStol]

holosight =/= reflex sight

What you have on your m4 is reflex sight. Holosight is much more expensive and better.

[demtherenonames]

i have the same gun and i have the same barrel issue as you. if u know of any to fix this please tell me

[bogdan192]

Ducktape or teflon tape around the fillet. It's been explained before in the comments. Or you can try a Mad Bull RAS Fix device (you can find them on airsoftgi(dot)com)

[pain0frain]

u said u didnt have any bbs and yet when u toook the clip some fellout?

[bogdan192]

It's a common behavior that 4 or 5 bbs still remain in the hop-up feed tube and will not be fired unless you turn the replica upside down. Sometimes, one bb will still be present in the hop-up and will be fired but the rest will remain in the tube.

[geecuey2k]

the silencer on this is detachable? i don't think so.

[bogdan192]

The silencer is removable but it acts as a outer barrel so if you take it off, the inner barrel will be exposed. The silencer is 14mm ccw and can be attached to any barred with a compatible thread. I've tried it on my Galaxy G5 and on a TM AK-47.

[xxthedrizzlexx]

rubber strap wrench will do the trick.

[AirsoftingBeast]

Does it take a Large or small type battery?

[bogdan192]

It takes an 8.4 crane stock type battery. It has a small Tamya connector.

[AirsoftingBeast]

Thanks for the quick reply, subscription added.

[nitroluchox]

i like the m4

[KvasoooO]

Hey bogdan i have one question. I have the same gun as u and i mounted red dot on it, but i was thinking about the laser to. Is the laser usefull only a night or in day to?

Thank u!

[bogdan192]

Lasers are useful in confined spaces where reaction time is key. I found that it gives you an advantage when firing at short notice without having the time to properly aim. Other then that, it's a very good intimidation factor when having to hold dark areas. Enemies will be less likely to storm when they see a green beam sweeping the entrance.

One problem with laser in airsoft is their straight trajectory (usually bbs follow a curved trajectory) so they will only be accurate to about 20 meters.

[halohaulic111]

hey bogdan would you suggest getting this gun?

[bogdan192]

I would suggest this only to an experienced airsofter, one who's not afraid to do some tinkering before taking it to a skirmish. If that's not your thing, then go for one of those new full-metal Jing Gong. I hear they are awsome and from my experience, they are rugged and reliable.

[halohaulic111]

My parents lived in ramstien for 12 years

[halohaulic111]

a few bbs fell out

[bogdan192]

Usually there are 4 to 5 bbs still left in the hop-up feeding tube. These won't be fired unless you turn the entire unit upside down.

[halohaulic111]

I got mine yesterday and it did the same thing

[iplayairsoft1]

do u know how 2 take the inner barrel out? There's a plastic thing on the end so u can't take it out off the gun. do u know how to get it off?

[bogdan192]

Just pull it off. It should come off easily. make sure you don't lose it. You can re-attach it after you insert the inner barrel.

[rockerlogo]

where did u get it?

[bogdan192]

crw-airsoft.

[pregnantnproud]

very nice. very very, nice

[shanedude93]

im likeing that world war 2 camo gear in the background :)

good review

[halohaulic111]

Its not it is german bdu's

[shanedude93]

didn't germans use that in world war 2?

[halohaulic111]

no from what I'v seen I thought they wore grey

[shanedude93]

oh thought this was the camo they used for fights in the country side

[madguydrummer666]

shit i've buy one and i'm waiting it, but here from all the italy shops it comes without the mazing logos!!!