Full Function Wrist Blade Tutorial

[Rachamacha]

Question, will work if I make the whole thing thinner?

[TheDugan17]

Dude, an easier way to show us would be to have a plastic see through blade

[issacblast]

Holy chiz, I finally understand it. Only took half the Sinza DAOTF forum and watching the vid five times.

Guess what I'm making tomorrow? >:)

[snuckels1]

@SuperFerretzz He made that "blade" himself... At the end of the video he showed what he cut the parts out of

[hissatsu23]

can i buy it please

[lunkprab]

I understand this, what i dont understand is, how you keep the T or the blade itself to not getting forward when you push it to make spring strech.

In other design the latch also hold the blade, so the blade has a notch, i dont see in this one.

[NeniioN]

please... show me how it is constructed inside and I SWEAR I will make a hidden blade of awesomeness O^O

[Domination012396]

Post a tutorial

[snakeguy500]

If I use to use metal siding to make a hidden blade would this work well or not

[Silverus12]

wath king of gauntle are you using in the video?

[GuerraTribolet]

thumbs up for ASSASSIN'S CREED!

[XDranzer000]

@GuerraTribolet Me Predator.

[GuerraTribolet]

@XDranzer000 ooooh not bad... A+ for you sir...

[poopdog380]

That looks great. You should make and sell some of the mechanisms. I would definitely purchase one

[SchmitatiousD]

are you selling the mechanism?

[iTzGr1mReaper]

@kaibyl1 Dear kaibyl1,

I have sent my men with food,water and weapons if needed for the rest of your journey.May they make hast and deliver these to you before it's to late.

Your old friend iTzGr1mReaper.

ps.I will join your journey for the lost comment if needed.

[feralart]

The metal piece you use for the trigger seems terribly unwieldy and awkward. Other than that, it's pretty smooth.

[DemonWeasel1990]

BITCH I EAT PEOPLE!

[MultiLittledave]

can you make a video that describes exactly how the mechanism works? Please

[kaibyl1]

hunting of the templar andrew49174´s comment: day 15

low on resources

all my companions are dead

losing hope of finding what we were searching for

[dragonseas]

muy bueno tu video ahora entendi como ffunciona gracias por el aporte :D

[MusicDiskk]

talk god dammmit!

[Mezzbo]

THANK YOU!!! this is the first tutorial that makes sense. I'm making one of these ASAP

[teeheenoob123]

안 영! If I spelled that right lol :P

[tottaledwolf]

The best hidden blade with best explenation so far on internet.

[MusicalHowl]

how do i make it so that the blade sticks when i try to stab something(not a person). so the latch that holds it in place an doesnt just slip out of place? and do you think you could help me think of a way to make it so i can just pull on a string twice instead ofhaveing to push the latch back in. because if i had to push it back in it defeats the purpose of having the blade be a true OTF it would just be a regular dime-a-dozen drawer slider hidden blade. i wanna FEEL like an assassin.

[sk8rjarod]

its just a switch blade



[iTrollingLiekABaws]

@sk8rjarod NO SHIT CAPTAIN OBVIOUS ?!

[DarcMac]

I am truly impressed! I always wondered how those knives worked too. Good video!

[MultiSkateLover]

THAT IS SHIT!

[goldenpride108]

I FUCKING HATE YOU! I'M GANA KILL YOUR FAMILY! (jk) (i don't like those last two pictures.)

[SuperFerretzz]

Where can I get this particular knife? It's perfect for hidden blades

[AnotherGaisle]

@SuperFerretzz It was made out of plastic, like the rest of the mechanism.

[phantomrider115]

@SuperFerretzz naw, metals better. At least it stabs better.

[Caigefox]

I had found one error in the dimensions of the Ts. In the instructions, it says that both Ts are of equal width. However one T is slightly larger than the other in your model. I'm not critisizing, I just figured you would like to know that.

By the way, for anyone else reading the comment, I'm talking about the link in the description.

[DistortedHoracio]

any way to make it slimmer? and a more discreet trigger and quieter mechanism?

[bboybiogrind]

It's so bulk but so nice :]!

[mheetsukun]

the bad thing of these tutorial is..dosent have the words ''hidden blade'' im with ValdemarBlix

[lukadubak]

it would be easier to get a micro tech halo v an duct-tape it to your wrist :L

[eban2011]

salve, per caso ne potresti fare uno simile e vendermelo per favore??? dimmi se vuoi qualcosa, spese di sped o altro ... la mia e-mail: doom10@live.it

[tayjacsmith]

dud great vid and the website youve got it on is very helpful

[ReNIX520]

you should make a tutorial on how to build it, I understand how it works but how do I put it together/make one? Thumbs up if you agreee

[dashanchen]

@ReNIX520 if you click the link in the description, it has all the measurements which should help

[wallmunky503]

@ReNIX520 The link in his description should show it to you pretty well.

[Im2Cool4UFoeva]

omfg..... thank you

[KabouterGhost]

70 euro's or 80 dollars for it

[TheDalien]

Christian Szell has used this... 

[ThEmAdHa773R]

Once again could i buy one from you?

[MysteryCardKid]

Simple, but illegal in most states; try getting that into Comic-Con.

[tnhl77]

@MysteryCardKid actually the way it works it counts as a slide assist so it does not violate the switchblade act of 1958 I looked out :)

[nanashi1o3]

figured that a OTF automatic knife would work cause of its design but im sure you guys have seen IXNAYxxx design looks like the parts could be made your selfs with a dermal and it seems that ammnra's design runs of the same make up

[noodlesman12]

this is basically just a switch blade i have 1 but its hell of a lot smaller

[SubZeroMK97]

The new Power Glove of Nintendo

[ThEmAdHa773R]

Would i be able to pay you for one? That was fucking awesome.

[andrew49174]

LOL dude you assume too much



[FalltoAbism]

Thanks man;)

[AzNFish1]

you can sell the parts of the hidden blade and sell the parts in a kit.

[MrMesocorny]

I AM JIZZING!!!

[animebilly]

Hey

[xfirewolfx99]

can i but it off u

[adamflip1]

hidden blade anyone lol jk nice man i might build one like ammnras lol check him out hid blade is epic

[gunsandbeyond]

@adamflip1 hey dude¡¡ do you know how ammnras HB works?thanks

[MrSalty953]

@gunsandbeyond It uses a pulley mechanism (I have a video of it on my channel) with an arm connected to it, this arm pushed what JmetalJ calls the slider/switch, so as the pulley rotates 180 degrees, it will push the switch backwards and forwards activating the mechanism, check my video out for a better understanding :)

[xXFreddyyXx]

where can you buy these blades, so that the grapes must be as firmly ? please , i must have a answer

[Azkix42]

Never mind then my question was answered

[Azkix42]

Awesome but what is that plastic or metal thing called that is holding the blade once again awesome and great idea

[The12Nurse]

could you replace the plastic blade with a steel one or any other light weight metals? would the blade's time of deployment and retraction would be affected if this was done so?

[danielxdglaciuus]

i bet this guy is on sumthing O_o

[Darkmadness11]

It looks like a toy.

Dude patten that design then blunt the edges and sell it to assassin's creed lovers

I'm too lazy to make one, but i would buy one

[2WIRE311]

Finally, i understood how the spring thing works, THANK YOU VERY MUCH !!!

[dragonkillers3]

Dude, I absolutely loved your video! Is there a chance I could get a template from you?

[0ldSandwich]

How come the T's aren't the same shape?

[TheHelifreak4]

i want to make one that magnetic

[TheHelifreak4]

@TheHelifreak4 it wouldnt work

[Impulse7able]

I e-mailed you and i just wanted to ask a couple of questions about some of the measurements and the in groves on the switch and side pieces how far they are away from certain points and would you consider selling me one cause ive tried and it hasnt turned out so well?

[jmreviews5]

how much would it be if i bought it

[LHRShadow]

make one with an aluminum case, and metal parts, and a 440 stainless blade, and i'll take 20..

[blackphoenixrose]

This is the most helpful thing ever. End of story.

[maxandmobile]

where do you get the parts

[ValdemarBlix]

This is the best hidden blade video on youtube, it actually works... But, if you could make just one string, not full metal. It would be the most perfect hidden blade on earth!

[ACULimoncelli10]

@ValdemarBlix

Un fortunatly it doesn't work like the one from assassins creed

[ValdemarBlix]

@ACULimoncelli10 It does, almost. I would be happy if you made a better one.

[ACULimoncelli10]

@ValdemarBlix

1) I never said that I could mace a better one (I couldn't even make one)

2) It works nothing like the one from the , it has a string rapped around one of the fingers when pulled in a certain way the blade comes out and when pulled in another certain way it goes back in.

[ValdemarBlix]

@ACULimoncelli10 Stop being an asshole, go somewhere else if you don´t like it.

[ACULimoncelli10]

@ValdemarBlix

I think that it's great but i'm just saying that it doesn't work like the one in the game. I do agree though that it is the best one one YouTube but like you said it would be better if it were fully metal also it's a bit big for a hidden blade, it wouldn't be very hidden.

[ValdemarBlix]

@ACULimoncelli10 Metal would make it a lot heavier.. Making it a little smaller is possible, but you sure can hide it well, btw. Im trying to make a hidden blade that is on the top of the arm. Like the one on "the smuggler" in AC Brotherhood multiplayer.

[slimboy808]

@ValdemarBlix the best hidden blade is Ammnra Assassin's Creed Hidden Blade

[gunsandbeyond]

@slimboy808 nope,its ezio's one¡¡¡¡ XP

[camx49]

@ValdemarBlix still wouldn't be as good as Ammnra's tho lol

[followthespringfield]

@ValdemarBlix aka Ammnra's design :P but i love this design also

[ValdemarBlix]

@followthespringfield ?

[ValdemarBlix]

You should really stab the 21 people that disliked this video!

[jptheasian]

why would you use a plastic knife?

[MetalStorm48]

hey just a quick wuestion: did you make the spring yourself and if you did how?

[AzVnFreestyle]

i think its definitely proving to be the most functional version ive seen yet, but its rather bulky...

[flclclc]

Can you hear the blade move inside the housing while you are moving? Also, can you change the materials from plastic to steel for a longer lasting blade? I do not intend to use this for deadly purposes. only a fanatic and id love to have a blade replica to show my friends lol.

[chopperooo1]

if you can't parkour with it on, you failed. if your hand has to stay down, you failed.

[killer7a7a]

@chopperooo1 i know a way how to do it with string and ring

[chopperooo1]

@killer7a7a thats the best way but not the right way

[tmhunter6]

Why do this when u can just buy a big switchblade?

[zZ1daniel1Zz]

oh crap u made that, i thought u attached a knife to your wrist gauntlet, nice

[jooppeman]

thanks I did not see the link in the discription but now I have all the parts and I'll build one today

[jooppeman]

tutorial??



[AirsoftCentralTV]

Where did you buy the knife?

[florisjanpietster]

good vid mate no i finaly know how the system works. but how did you aquire the long spring in the middle?

[Baynham3]

does the blade hold when you push it against something though?

[astris90s]

that is a fantastic creation you have there. It is the closest thing I could find to the actual game blade, as far as extension and retraction. The only request I have is to find a way to make the switch in the hand so as you wouldn't have to reach over every time. have you put any thought to that?

[TheTacticalAirsofter]

@astris90s A string with a finger loop at the end. And a spring on the switch.

[Niko4life123]

TUTORIAL!

[naruto14414]

great job its the first i have seen that is perfict with the blade setings

[KimberlyRose904]

how do you make the case?

[lildude825]

You should use a ratcheting pulley like ammnra

[GabeAndTakoda]

just tape a switchblade to your arm.

[RusBlackOutRus]

Пошли вы нахуй все вы бля пидорасы

[alvez161]

can i make with clay? then put in the oven.. idk! but i rly wanna make one

[celicarat]

Awesome and clearest video that i've seen. Added to my Youtube projects fav's list. Now you need to make one like Wolverene's (4 at a time). Do you have a website with plans? Thanks for the vid.

[dexterdexter747]

@celicarat 4? wolverine has 3 claws

[WorldGamingGurus]

Great idea shame if i had one in the uk i would be breaking the law :(

[joerm18]

is the blade metal or wood

[pedromoratalla]

I want to make a full Assasins Creed costume now. LOL Just for Hallowing and game conventions, but it has to be super badass or I will just burn it if it looks sucky LOL.

[AirsoftCentralTV]

Where did you buy the knife?

[MidnightStalker47]

pretty cool but the blade seems too short

[deathbybaby]

Hey J I am a collector of different types of weapons and i was curious if you would be interested in making some cash off your invention... My name is Nick let me know

[deathbybaby]

Hey J I am a collector of different types of weapons and i was curious if you would be interested in making some cash off your invention... My name is Nick let me know

[MegaIdontfuckingcare]

HOLY SHIT THIS IS OSOMMMEEEEENEEESSSS!!!

[bloodangel13]

Are there any way to make the wrist blade more compact so it can be hidden in sleeves of a shirt (like in assassins creed) ?.

[Killicon93]

For it to work better as a wrist blade, the system on the switch should be more like the spring and lock on a ball-point-pen. Meaning that one pull locks the switch into upper position and another pull releases it, making the blade retract.

[IDonutI]

not bad, complicated, but not bad. it's more or less a switchblade. best one I've seen on YouTube

[killerrey]

very impressive

[Earthdestroyers99]

i would use a knife blade to make it useful

[ossmkyle]

dude amazing can you please make me one ill pay you if its a good price or please send the plans to me

[LIGHTLORD09123]

you don't have to cut your finger to do this right?

[CrimsonpyroXX]

Good look.

[blastbrian21]

어이, jmetalj 넌 한국사람 잊이?

[blakfalcon1]

@ jmetalj can you please make a video of the action with out the cover or the blade on it cause ive watched this like 3 times and looked at the plans and i still have no idea how the spring mech works :P

[megaflyer99]

do you have PDF plans for it?

[jksalzamdz]

Yo! dude, how long did it take you to complete this work of art? How much did you spend on it?

[jmetalj]

@jksalzamdz It took about a week to fabricate it. and took me more than a week for planning.

[xxthesilentshadowxx]

@jmetalj dude if you make me one of these i will pay you 100 dollars

[jmetalj]

@andrew49174 한국에 너같은 놈 참 많다.

[andrew49174]

@jmetalj fuck off

[lokigogo]

@jmetalj "In Korea, there are a lot like you, bitch."

thats a great one xD

[zZ1daniel1Zz]

@jmetalj often in korea, marissa?

[therealcod6rocks123]

@jmetalj Say wha?

[AdamsTeinz]

@andrew49174 Tu sei un cazzo, amico mio.

[knifecollector93]

@andrew49174 Nice burn. You should give him a nice, friendly handshake with one of these wrist blades.

[kingwf5]

@andrew49174 templar douchebag

[tnhl77]

@kingwf5 Nice :lol:

[Astralmeep]

@andrew49174 All i can say is: Good luck in prison

[PhobosXL]

You could use a spring to the trigger to keep it back

and attach a string from it to the pinky.

That way it will "fire" when you strech your hand and

retract when you unstrech your hand.

(sorry for my bad english but you get the idea)

[MetalStorm48]

@PhobosXL Now that is a genious idea are you sure you're not Leonardo Da'Vinci?

[Masononi]

@MetalStorm48 maybe when he disappeared, he had built a time machine and couldn't get back 0.o

[Altovoltaje123]

muy bueno, solo falta una hoja de verdad

[MisterWho0]

watch?v=V_BBSRLBGos

this one is better and will be for sale soon.

[GTA4ma]

damn this is cool i want one ,too like in assasins creed but im not godd to produce the parts by myself :(

[jjaacckkllii]

Weight reduce? How heavy is it? :P

[CPTG0dK1lleR]

holy shit it works like the real one!!

[prawdaeh]

lmao was that a nintendo power glove? makes me wish i still had mine.

[destroyka777]

Good design concept, gave me some great ideas. Thanx!

[DrakyProduction]

You are the best

[nadleeh1]

with you hidden blade, theres no way we can get away if u hunt us down xD

[BornToKillLiveToDie]

@nadleeh1 we can,,,,be faster than him.

[runescapemaster401]

this would be a good assassination prank on april fools.

[SebHulett]

If i were to make this out of acrylic sheets instead of a piece of PVC from a computer board, would it be able to withstand the force of the blade coming out and then retracting back in. Also what do you think if i used 1/8 inch thick sheets what the minimum square inches will be necessary to make all the parts, i want to get a 12 x 12 inch sheet but i don't know if i will be able to get all of the parts.

[ZombieReptar]

Well that doesnt look suspicious at alllllllllll >.>

[jchu24]

when you are cooking can you pop that out and start cutting food up. lol