I have 2 acess point tp link WA-500G attached in a 8 dbi cpe and other is nanostation2 loco connected to a switch in a room on roof of my house and then a single cable is coming to my pc..both the device are placed on top of housse..im in client or station mode in nanostati reciving the internet and running it sucessfully..now i want to make other tp link device in Acess point mode so that i provide internet facility to my cousin also...her house is 12 14 house away from mine .how can i do this
Funny! I followed the disk instructions and then it says "No access to the internet". I looked everywhere on the net for suggestions or tips but I had no luck. All I want to do is connect my PC through the cable and at the same time have wireless for my laptop. I'm 100% sure that my mistake isn't anywhere within the WAN settings. I double, triple checked absolutely everything! It may be with the MAC address, but I cloned my PC one and still nothing. Can you help me?
HELP PLEASE.... mine is TD-W8951ND and i cofigure internet,no problem... but its not wireless.... i look every where on internet,it sais something about WAN setting... there is no taht option.... i got internet but through cable... can anyone plesase please please help me :( thx
If you need to change wireless network password, you should open web browser (your TP-LINK defauld adress is 192.168.1.1 login: admin pass: admin) and go to Interface Setup/Wireless. Your password will be shown on this website. If you can't login to your device you must reset it.
switching off the power, pressing down the "Reset" button while switching power back on, releasing the button after 10s from the moment of power on, waiting a while for completion of the reset.
@dipolnet Hey man please help... when ever i try to install my TP-link wireless router, it gives me these errors at the very end of the setup of the disk.
@dipolnet Hey man please help... when ever i try to install my TP-link wireless router, it gives me these errors at the very end of the setup of the disk.
@tvpms No it will only allow you to use your existing DSL internet connection wirelessly instead of hard wired. If it got you free wi-fi the whole world would be covered in signal.
@marko4449 yes, i did manage to fix it. First, When ur internet modem is directly connected to the computer, find and note your ip address, subent mask, dns, default gateway etc. then connect the router as it asks you to, and then open internet explorer, and type in the ip address of the router. then click quick setup, and choose static IP as the option. and finish the process. after that, go to static routing under advanced settings, and click add new. the add all the info u found earlier done
how do i connect this crap to my iphone or ps3 using wireless someone help plz
darknicho 1 month ago
This has been flagged as spam show
I have 2 acess point tp link WA-500G attached in a 8 dbi cpe and other is nanostation2 loco connected to a switch in a room on roof of my house and then a single cable is coming to my pc..both the device are placed on top of housse..im in client or station mode in nanostati reciving the internet and running it sucessfully..now i want to make other tp link device in Acess point mode so that i provide internet facility to my cousin also...her house is 12 14 house away from mine .how can i do this
theSharu999 1 month ago
do I have to use the telephone line for the internet or can I use an ethernet cable and use the TP-Link only as a WLAN source?
willibilli1996 2 months ago
@willibilli1996 Yes, You can use TP-Link as WLAN source only.
dipolnet 2 months ago
How? Any manual, because when i try, network status has issue..
defog171 1 week ago
will this router+ modem gives internet to multiple laptops at same time wirelesli plzz replay.? Tnx!
lmnk7 4 months ago
@lmnk7 yes, it will ;-)
dipolnet 4 months ago
my problem is the router verification i failed. what should i do??
amiraramizan 4 months ago
Funny! I followed the disk instructions and then it says "No access to the internet". I looked everywhere on the net for suggestions or tips but I had no luck. All I want to do is connect my PC through the cable and at the same time have wireless for my laptop. I'm 100% sure that my mistake isn't anywhere within the WAN settings. I double, triple checked absolutely everything! It may be with the MAC address, but I cloned my PC one and still nothing. Can you help me?
sarkin6tain 5 months ago
he im facing roblems at the end of the installation .. it fails to verify the router settings .. wat should i do?
palsaab 9 months ago
@palsaab m havin the same problem..did u find any solution..kindly help!!
MultiNaqash 6 months ago
HELP PLEASE.... mine is TD-W8951ND and i cofigure internet,no problem... but its not wireless.... i look every where on internet,it sais something about WAN setting... there is no taht option.... i got internet but through cable... can anyone plesase please please help me :( thx
MrOneAndOnlyMan 10 months ago
Hey man please help... when ever i try to install my TP-link wireless router, it gives me these errors at the very end of the setup of the disk.
________________________________________________-
1)Please check the wan connection type and parameters.
2)Please check your network connectivity and retry.
TheKiller982 1 year ago
This has been flagged as spam show
@TheKiller982 budd m having the same prob..did u find any solution?? kindly help
MultiNaqash 6 months ago
what is the downloading speed?
4531236 1 year ago
I cant find the security part on my wifi IP to make a pass help !
dragonxwalid 1 year ago
@dragonxwalid
If you need to change wireless network password, you should open web browser (your TP-LINK defauld adress is 192.168.1.1 login: admin pass: admin) and go to Interface Setup/Wireless. Your password will be shown on this website. If you can't login to your device you must reset it.
dipolnet 1 year ago
@dragonxwalid
Reset procedure consists of four steps:
switching off the power, pressing down the "Reset" button while switching power back on, releasing the button after 10s from the moment of power on, waiting a while for completion of the reset.
dipolnet 1 year ago
This has been flagged as spam show
@dipolnet Hey man please help... when ever i try to install my TP-link wireless router, it gives me these errors at the very end of the setup of the disk.
________________________________________________-
1)Please check the wan connection type and parameters.
2)Please check your network connectivity and retry.
TheKiller982
TheKiller982 1 year ago
This has been flagged as spam show
@dipolnet Hey man please help... when ever i try to install my TP-link wireless router, it gives me these errors at the very end of the setup of the disk.
________________________________________________-
1)Please check the wan connection type and parameters.
2)Please check your network connectivity and retry.
TheKiller982 1 year ago
Comment removed
Aidilamzar77 2 months ago
Verifying router settings... X =(
Help
iPs3master 1 year ago
Wow GOOD JOB!!
USofArocks1 1 year ago
This has been flagged as spam show
Try Latino brides in your area rockmycity.info
carolinrakermns 1 year ago
so this will get me free wireless internet?
tvpms 1 year ago
@tvpms No it will only allow you to use your existing DSL internet connection wirelessly instead of hard wired. If it got you free wi-fi the whole world would be covered in signal.
grizz4101 1 year ago
Do you like to meet a Latino lady rockmycity.info
hajiaad 1 year ago
i get a "failed to verify error" HELPP Plzzz.
mazedarboy 1 year ago
@mazedarboy same did u get it fixed plz reply
marko4449 1 year ago
@marko4449 yes, i did manage to fix it. First, When ur internet modem is directly connected to the computer, find and note your ip address, subent mask, dns, default gateway etc. then connect the router as it asks you to, and then open internet explorer, and type in the ip address of the router. then click quick setup, and choose static IP as the option. and finish the process. after that, go to static routing under advanced settings, and click add new. the add all the info u found earlier done
mazedarboy 1 year ago
@mazedarboy ty dude
marko4449 1 year ago
@marko4449 not a problem :D
mazedarboy 1 year ago
my laptop cant read the small CD. HELP!
SwaggerBoiiiY 1 year ago