Predator Tutorial 3

[84Wehrwolf]

music... ahhh damn fuckin loud music xD

[Dragonlancer180]

this is awesome, but what did you use to get the designs on the pieces?

[Dragonlancer180]

@Dragonlancer180 nvm, didnt watch far enough till i asked

[xxHappyMeal84xx]

Hey man I try to find to find that foam, and is the foam u put under the workout machine ????

[anakinbignell]

@xxHappyMeal84xx yep

[xxHappyMeal84xx]

Omg u rock!!!

[stephaniebenson69]

Can black fitness matts that connect work?

[anakinbignell]

@stephaniebenson69 yeppers

[Ilovehimtoomuchly]

i agree with 39915bm

[predhunter50]

dude are you talking because i guess the predator's evil song is in my room lol

[39915BM]

Turn down the music we can barely hear you talking.

[RaymondHamby]

you should just go to walmart or home depot and buy a wagner heat gun. the kind you use to strip paint. it only takes seconds to heat your piece and gives you a whole lot more flexibility when making your suits. $23

.

[anakinbignell]

@RaymondHamby thanks for the info there, hamby

[RaymondHamby]

@anakinbignell you're welcome. it just makes things a whole lot easier

[DrFireFOX93]

1;24 bullshit going on in the background

[anakinbignell]

@DrFireFOX93 that's the tv,,,

[CHIBBITEA]

sorry i wasnt able to hear... how were you able to bend the foam and keep its shape?

[Beatmaker216]

i assume your making a stalker predator from aliens vs predator extinction because they are red and black lol

[anakinbignell]

@Beatmaker216 i had that in mind,,

[anakinbignell]

SOORY FOR THE LOAD MUSIC PEOPLE...I'LL DO A BETTER ONE NEXT TIME..

[zulkay]

How did you do to make your foam so hard? Mine is soft as hell so when i try to do a armor it's too soft and it's not very realistic.

[anakinbignell]

@zulkay hi this is rockmanmb,,if ya listening carefully..i bougt the half inch foam mats from wallmart or cnd.tire..cut ya own design..pre heat oven at 360,,put ya finished cut in oven,,for a 15 to 20 secends..anymore than that will burn and smoke..take out..use a fan,,and bend,,once cooled ,,it will stay that form..try it,,

[cory18011801]

indy mogal much?

[kimiolacio]

the music is very hard! but the tutorial is great!!

[anakinbignell]

HELLO THIS IS ROCKMANMB..I'LL RESPOND TO THE COMMENETS ON HERE FROM TIME TO TIME..HAVE A GREAT DAY

[crowsith]

cut the music out, cant hear a word you say.. every vid its the same

[KragJin]

music is way too loud :P

[MegaFantasyman]

Join the hunters layer

[Rize2death]

cool!

[TheRyanbizzle]

How durable is your foam armour?

[anakinbignell]

@TheRyanbizzle THE FOAM IS VERY7 FLEXIBLE AND LIGHT..TRY IT OUT

[RockManMB]

@TheCyborg999 ya can buy them in any store like wall mart..cdn.tire..they come in a pack of 4

[RockManMB]

@TheCyborg999 foam

[RockManMB]

soory about the music ,people,,i thougt ihad te volume very low when i did this..

[danatnotts]

@RockManMB no mate i cant hear a thing your saying when its playing. dumb ass

[xPiKaChu667x]

just wondering. did you thin out any of the pieces?

[RockManMB]

@xPiKaChu667x ya don't..unless ya cut them..or used a thinning foam..which i see around but didn'tgo that road..

[MsExstacy]

ok so i got the shapes done but i think i might have taken them out too early plus i had to use a grill (which somewhat worked) but do you know how to make it more bulky and add spikey curves to the side im trying to do erza from fairy tails armor

[avatar6699]

@RockmanMB Great info yet again RM. I would imagine the heat helps bring about a small cure effect and locks the shape as needed. I look forward to working on my torso armor this weekend. Thank you again.

[avatar6699]

That's excellent info RockmanMB, ty. I am not sure if I missed it, but you must have used something to harden the foam up a bit once you shaped it, or was the heating alone enough to help it keep it's final shape you wanted?

[RockManMB]

@avatar6699 helllo..well i did not use any hardener..what i did was,,i cut my shape out 1st..2nd..i pre heat in over for a mintute..make sure to use gloves cuz it gets hot..then i used my own leg/thigh to curve the foam..a fan on high will help too..it will cool and the shape will stay.

[avatar6699]

Where did you say you found these foam mats, and how hard are they before cutting? I have seen many 2ftx2ft mats of this type, but they are all EVA Foam and very, very flexible. Thank you.

[RockManMB]

@avatar6699 i bought them from wallmart or canadin tire..they come in a pack of 4 sheets..very flexible,,some came in colors but that's ok cuz ya can use a primer to coat them 1st ,,then spray paint...

[virgleomaris]

Hi, couldn't hear what you used to Carve the GROOVES into the Shin Guards, so just wanted to ask how you did it?

[RockManMB]

@virgleomaris hello i used a dremill for the grooves..but i drawn on it 1st ,,them dremill..

[Predpool]

omg the ugly mother fuckers are back to hunt but this time its in the desert. 7:35

[RockManMB]

is owrking on a new tutorial..be on youtube in a week..

[RockManMB]

sorry guys,,havening made anew tutoril in awhile..need a new camera and all..but stya tuned..

[jizzlewizzle420]

Love the work and appreciate the tutorial. Is there anyway you can send me a pic or direct me to a page to see a little more detail on the final pics. Wanna see how to make shoulder armor and some other details. Love the costume man. One of the best I've seen.

[jurassicpark4ever]

i subbed, oh and by the way you should really cut the music out..cant hear your voice....

[wildfilms365]

your music's too loud

[RockManMB]

@wildfilms365 whhops..

[warturtle11]

How did you bend the armor into shape? I heard you say that you used your oven, but how did you get it to keep the shape?

[RockManMB]

@warturtle11 i set the oven to 300, get it hot, then put cut out foam in it for at least 1 nintute..or less,once ya see it bending,,take out(use stove gloves),,apply around ya leg..(example)..use fan to cool off faster,,it does work...

[warturtle11]

@RockManMB Thanks! Hey, is there any way you can show a how to for the inside of the pred helmet? The first vid went by real quick, it's hard to follow the structure.

[ExionSlade]

I'm getting tons of ideas, thank you. ^^

[RockManMB]

@ExionSlade glad to help..

[CustomFig]

what kind of foam is this.

[RockManMB]

@CustomFig regular foan mats,,ya buy anywhere..try it..it works good..

[RockManMB]

predator tutorial 5 is up..

[IngramOfMichigan]

The music kind of covered up what you were saying--you might want to fix that

Otherwise, great video! Very logical

:)

[mewgirl16]

thanks for the tips on the foam!  you've really saved me c:

[machelle0909]

where did you gat the dreds and how cheap where they

[RockManMB]

@machelle0909 the dredlocks are made of foam tubing..ya can get them in any hardware store near you,,just ask for them..they come in a roll package..

[RockManMB]

make sure to check out the fan film..Predator Reloaded

[sailorclass1c]

how did you attach them to your self

[RockManMB]

@sailorclass1c hio..well i used valcro to attached them to me..

[sailorclass1c]

so how did you paint them

[RockManMB]

@sailorclass1c paint them..using hold hold spary paint from stores..

[RockManMB]

sorry about the muzic being a lil too load, ya can't hear what I am saying at times..

[siiiirDevil]

where do u get the foam at

[boastudios]

@siiiirDevil lowes or home depot would be the best places to get this

[RockManMB]

@siiiirDevil got it from canadian tire or ya can look at wallmart..