How to Repair a Lawnmower : Removing the Carburetor of a Lawn Mower

[couvidan]

its all so easy... just like 2 bolts..

[zhavah]

You need more light (portable lamps aimed properly work fine) and close ups. I can`t see anything at all.

[oledcrt]

Yup... Were gonna talk about it in a little bit and then the video ends. Like the youtube video limit is 2 minutes and ten seconds.

[steveho75]

My name Steve Ho

When i start the lawnmower i see a puff smoke and Back Fired from the Lawn mower muffler. How do i fix that peter cutwein?

Steve

[BigDave331]

Can't see nothing, please redo your video. If you really want to share this.

[JustaFanVids]

A video of the back of your head is a big help.

[kiedro96]

this is gay

[C0LL1N]

expert village tip of the day: if your windshield wipers are worn out, then its a good idea to buy a new car

[unknownsoldierz]

Wow, this is very useful. -_-

[terry987654]

be carful when you pull off the carb that you dont rip the paper gaskit if you do you will need to replace it(not expensive but a bit of a pain) or take a pice of card and stencil with old one then cut it out that is all the paper gaskit is anyway

[gokartbuyer]

this is why i never watch expert village,they always want you to replace everything ,that could be repaired with a simple trick.and it is sooo corperate like.never finsh a project in one video.

[tickattack]

Could you please re-do your videos and have close-ups of the work?

[mystiqueman366]

id rather be taking a crap rather than watching you and seeing nothing

[jeepers2655]

camera shy?

[hammyoni]

cant see crap

[steveho75]

what would cause the lawn mower blade shaft to loosen. and When i pull the starting rope the lawn mower will not start anymore and The Lawn mower blade keep falling down on the ground when i pull the starting rope. and Now the crankshaft too tight it is hard to turn how do i solve this problem? This is first time i am repair a crankshaft of lawn mower.

Steve

[partyboyperk]

what would cause a lawn mower to not start if you rebuilt the carb and replaced the spark plug and done all that crap? And sprayed starter fluid in it and it back fired and blowed flames and smoke out of the carb.

[collinsup]

make sure the float is adjusted right and working smoothly; it could be flooding the motor. also make sure that your throttle's working smoothly.

[Evmoy15]

Your flywheel key is sheared, causing the timing to be off. Remove the flywheel and replace the key.

[quickasucan]

If you're going to video something intending it as an guide to others then the video should clearly show what is being done. The filming is poor in the extreme . It fails to clearly show the procedure being carried out. All you get is a clear view of the mechanic who looks as though he's working on a black hole.