Chrispeee's Minecraft - 3x3 Piston door tutorial!

[MrJason005]

too bad CNBMinecraft and MinecraftAddict have better designs.

[jitjpie]

what texture pack u using?

[shagzdesign]

The middle piston won't go down because of a timing issue with the torch chain going straight up, the torches turn on and off slower on 1.0.0, to fix it, instead of using torches, take a little extra space, use redstone wire and repeaters to power the top two pistons and it will work just fine.

[vfpprogrammer145]

Can u please give mee a download of this map because it dont working at me

[vfpprogrammer145]

It dont work. The piston in the middle dont go down

[vfpprogrammer145]

Cool Music What is it

[madjack3232]

Mildldy disturbing music....

[Datron101]

SO much work for a 3x3 door... I'll just stick to my 2x3's

[GlideImperiumEmperor]

so i followed how you built the door but i keep getting a problem with having the piston that pulls the center block back, not getting pulled down. any advice would be appreciated thanks.

[maurisje96]

@GlideImperiumEmperor same problem tried everything.... and followed every step

[HellFireRob01]

@GlideImperiumEmperor Same problem here, anybody got the answer?

[HellFireRob01]

@GlideImperiumEmperor Actually I think i just got it, I added 1 tick to all the repeaters (except already max ones) so if it was 1 tick it would be 2, etc to all of them and now it seems to work :D

[TheDarkRaider126]

youtube.com/watch?v=bvWY51owd8­k plz check out mine :) its the smallest on youtube i belive

[imbored742]

i seem to be getting lost somewhere around 3:07, the middle piston extends before it can be pushed up unless i add delay on the left side, which apparently i shouldn't be doing, also, on another door, i cant get it to bring the middle piston and block into the floor when it opens, haven't been able to fix it, afaik i'm following the video step by step

[skatterpro]

I built this like 2 days ago, i connected it to a combinition lock, and everything worked GREAT.

I set up the repeaters to what @BlameTheController said, and it WORKED.

And now, 2 days later, the middle block wont drop. I have tried to fix it for like 2 hours now... HELP PL0X

[skatterpro]

I rebuilt it too, tried both the repeater settings from the video and from @BlameTheController .

I've tried to fix it for hours!

[Thomasnor1]

sounds like sex

[ZShotokan]

It is a great thing, but i just cant make it work!

[apocolypse623]

omg that glitching repeater was so distracting

[lazyorc]

@apocolypse623 ocd lol

[apocolypse623]

@lazyorc nah, ADHD =D

[REMoyen]

Thanks alot, you really made this simple to follow!

[toope12345678]

Thank you.

[asassin3747]

hey man, i've completely followed every step. but i cant seem to get the middle piston to come back down with its block... could you possibly hop on this server and show me?

[Slysheen]

very enlightening, Easy to hide, clear steps, had to monkey around with the delays a bit to get the middle block down but worked fine. I'll mess around with the design a bit later to see if I can cut unnecessary parts,

thanks for outlining it for us!

[Draknar95]

Thanks helped alot

[AlexN5142]

lol. ive always wondered what a rabbit pulsner looked like. looks kinda similar to a rapid pulser! :)

[BlameTheController]

The setup as is, does not work. you need to mess around with the delays on the right hand side.

Rapid Pulsar = all 3 at 3 clicks

Top right = 0 click

Middle right = 3 click

bottom right = 3 click

Then it will work.

[SuperQwax]

@BlameTheController

Could you please give a more specific description of which delays are supposed to be flicked?

[BlameTheController]

@SuperQwax

To get this to work:

Looking at it from the front:

There are 2 stacks of blocks that trigger the middle block to work. A left side and a right side. Both are 2 repeaters next to each other.

On the **RIGHT** side. Change the delays to the following

Top = No Delay

Middle = 3 click (max delay)

Bottom = 3 click (max delay)

Also change the Rapid pulser in the far back right max delay for all 3 of them.

[UrfsVengeance]

@BlameTheController thx dude you saved my door!

[NinjaKow0]

@BlameTheController You're a life-saver.

[KaneTheTraitor]

@BlameTheController you also need to add a forth repeter to the rapid pulser and set to a delay of 2 and then the pistons will sync

[BlameTheController]

this tutorial is infinitely better than the other 3x3 on youtube.

[kahanejosh0]

My middle piston doesn't get pulled down when door opens either. Hope someone can help.

[ISecondMaNx]

woah woah woah did he say at around 4:30 that that was a rabbit pulser? isnt rappid?

[kecooper13]

The door works the first time, but after that, the middle piston is stuck in mid-air and extended. Everything else works but that! What am I doing wrong?

[HatersArePoorPeople]

Hey i hope chrispee or you guys can help!

My door do not work :( it works all until the place where i need to make the pillow for the top piston after i wired it all it do not work ;(

The repeaters and the whole thing is build exactly like the tutorial

[38dedo]

timing doesn't work properly, and the porn music makes this video very uncomfortable.

[TooDamnSmexy]

thank you so much for the tut but when mine was finished the middle piece did not get picked up it looked like maybe it was too high

[seanie502]

THANK YOU. That is all.

[minecraftchrispeee]

@seanie502 hehe no problem :D

[TooDamnSmexy]

@minecraftchrispeee like there is a timing issue for when the middle one should close

[max82power]

@TooDamnSmexy I had that too: check the repeater at 2:24