The end is only the begining ~ a new life for my 2008 Kawasaki Ninja 250R

[mcturk17]

Question, REALLY NEED UR HELP

ok u see that shifter lever right right in front of there is that circleish thing that is connected to the engine that makes the lever shft or wat ever. that the little metal thing is connected to rite

now that circle thing has that rubber cover , now when u peel it off to the side is that thing suppose to be lose and moving or suppose to be tight with a screw. because mine moves up and down when i grab it, it doesnt come off but im just paronoid of it

[jorgecornet]

@mcturk17

i think the shifter bar...which has the two rubber covers  on each end....is supposed to be a little loose..but then again...not super loose..just a little flexiible...if i'm not understanding you make a video showing me what s wrong..then i'll comment

[mcturk17]

@jorgecornet well i dont actually kno if anything is wrong with it or not but on this video at 2:41 u show the shifter, the little metal thing thats connected to it. and the part where it connects to the engine has that rubber to protect it i guess.and when i wiggle with two fingers it moves easyly so im wondering if its suppose to do that. and if u pull the rubber protection to the side ull see a whle is there suppose to be a screw in that whole or not is what im asking

[tat2time]

it means so much more when you do it all yourself, bike looks great, i'm looking forward to your vide, ride on

[jorgecornet]

@tat2time

oh that was 6 months ago..since then i have wrecked twice in potholes

[bfmv580]

Man you've done a great job! Looks spotless, enjoy your ride :-)

[jorgecornet]

thanks

[kintino]

Hi Jorge!! I watched all your videos and liked a lot! I'm about to buy one also (black 250R) and your videos will really help during its maintenance. I was wondering if you're going to have a fender eliminator installed. If you are, could you pls have a video instructing how to do it?! =)

Congrats for your "new" bike and vids!! They are awesome! Keep it up man!! =D

[jorgecornet]

no, i'm not planning on installing that for now...i like the stock bike as is...i figure if i ever decide to sell it unmodified, except for the airfilter, i may get more money for it... it does look better but...the fender kinda helps with the water backsplash no? so if anyone rides behind you they should get less wet? i think not sure...thanks for watching stay tunned...

[elements140]

whats the song at the start of this video?

and nice vid, bikes looking nice :)

cheers,

[jorgecornet]

song name is be cool by -paffendorf, thanks...stay tuned let me know if there is anything you were interested in me doing a video about

[Nickymo64]

babbitts online has exhaust pieces for this bike. i ordered from them to replace some damaged plastics. they are reliable but expesive.

[suzyq908]

Congratulations Jorge.....I love the song in the intro! I'm sure you are relieved that you finished. I look forward to watching your vlogs

[jorgecornet]

Wes sent me an email ..he has brand new pieces for the tail and has some of exhaust that should be coming in the mail sometime in the next few weeks

[147932xz]

nice job man it finaly paid off =D how much would you say you spend money wise on the bike (except the gear cus i know it fairly expensive) ? if you dnt mind me asking =D

[jorgecornet]

$1,900 bike,750.00 wes Collins, 65.00 mirrors, 38.ish repsol oil & K&N oil filter, 78.ish K&N air filter, 14.00 brake fluid, 07.50 brake bleeding kit, 21.00 coolant, 45.00 turn signals,15.00  tank pad, 31.00 title, tax, tag, 85.00 insurance with GEICO for 1 Year, 8.30 electrical tape, crimps,16.00 chain lube & cleaner, free decals

= $3173.80 + A Lot TIME + A lot of YouTube + Learning

Gear cost $147.50

101.00 Helmet on eBay, 40.00 Alpinestars gloves, 6.50 Suction cup mount

[147932xz]

Jelus... dang thats very cheep also to add on that you actuly enjoyed doing all of this... nice job man 10/10 and thank you so much

[jorgecornet]

i'm thinking about doing the same thing with a bigger bike...and replacing the parts..

[147932xz]

If you actuly enjoy that s much you can actuly make a small side job doing that buying damaged and wrecked bikes fixing them ether keeping them and then when you want a new one you just sell to make a profit you have a new bike all the time and whit the right deal you can just make a profit =D good luck there i hope you ambition takes you somewhere good

[jorgecornet]

thank you...I want to start doing more videos...and get more subscribers ratings and comments..but i would like people to tell me what they would like to see and what they would like to know more about...

[CZroe]

He got a serious DEAL on the plastics... probably for promoting his source so we can't expect to get the same price. Even then, he might have been able to find a used one that hadn't been dropped for about the same. Some areas they go for way too much when used. MSRP was $3,500 for the 2009 and I got mine for that only one state away from him (VA).

[jorgecornet]

i did get a deal but not for promoting Wes...I got a deal because he bought all my old parts (broken or in need of repair) and he basically sold me his parts at dealer's price or less - the money he gave me for mine...he sent me new and used parts ..If anyone needs parts you can call wes..and he will Hook you up....

[CZroe]

That's nice to know as many who might need the parts could be in a similar situation (damaged parts in need of repair to sell back).

[147932xz]

i wouldent dout it but im not going for a 250 anymore im going for a yahmaha FZ6 OMG what a baby and for an 05 gose for around 2.8k thats Freking cool b/c the msp of them when they came out was 9k so YEA i love the dual bug eye action and its more of a cros country bike with the sporty look so its great all around. =D which me luck and this is in (CA) hela lucky tax here is about 9.75% +the fess and ca tags exc exc.. =(

[SnapShot83]

well done on your bike, it's looking awesome :D

[jorgecornet]

Thank you !!! i am currently trying to figure out how to block wind noise from my microphone..and then i will be Vlogging asap..!!! Thanks for your comment, subscription, and rating..

[hughes111]

Please tell me you didnt go on the highway without a jacket on etc lmao

[jorgecornet]

yea...i'm buying my jacket tomorrow if i can hustle a good price...

[hughes111]

Fair enough, brave man lol

[jorgecornet]

not brave...just Spanish

[Sxybutchgrrl]

ohhh can u send me tha link for tha suction cup?? Thanks! ;)

[jorgecornet]

go to ebay and search

"suction cup camera mount"

and modify listings

"lowest price first"