I have picked up two sets of Corsair ram with at least one bad chip in each. One of my original 2 GB chips from my original 8gb kit is jacked, and one of the the 4mb chips from the 16gb set was toast. Last time with the Corsair for me.
Your OCZ probably wasn't on your motherboards qualified ram vender list. If they were and they're still causing your system to crash then you were either pushing them too hard, or if your not overclocking then thats pretty much a sure sign that they are defective. Try to send them back before its too late.
hey, if u use an i7 rig watch out for the voltage ! These Dominators already have the highest voltaged that Intel considers as safe.So don't give them too much "food" or u can say byebye to your i7 cpu.
so sad my country only sells 2gb pieces~ T_T i cant find any like 4gb piece or 6gb piece~ T_T i fucking want to make my pc 16gb~ now i have 8gb only~ 2gb x 4~
yes u can run 2 295s in sli and and a third in a phix mode it is point less mind u but u can u dont need to run a phix card with even 1 295 fuck i have 1 295 and i dont think 2 would make any diff really cause im already getting max fps in cod 4 cod 5 waw and all my other games 2 is just a wast and using 1 for phix is just dumb ass hell what a wast of money and a good gpu
With a 295 you might want to play Crysis. Look it up if you haven't heard of it. Games like Call of Duty are made cheap and the developers only want your money. They barely made the game look different from its console versions...
Had my OCZ DDR2 for about 3 years now, no problems on a fully overclocked system (Q6600 @ 3.0ghz)
However, Monday will be the sad, sad day I throw it out due to the fact I have just ordered my new parts, and seeing as I'm switching up to an i7 platform I ordered 12 gigs of Corsair XMS3.
So goodbye OCZ RAM, you have served me well. Don't listen to people who say OCZ sucks, because its a laster.
where could i buy these im bulding an i7 extreme system which I want to max out. i7 ext ed 3 295 gtx oc water cooling etc... I couldn't find this on newegg. thnx
dude you can not run 3 gtx 295! there are only quad set up.. you can only run 2 of them in sli. if your friend is running 3 then post a video response of it... but i think you are on crack
lolz I'll post it when I see him He's not that near though so it may take sometime. Also I don't do crack and that shit so be careful on what your saying.
you are a person lacking ordinary quickness and keenness of mind;characterized by or proceeding from mental dullness due to lack of meaning or sense; you are in a state of stupor. do your home work. he is running something other then 3 gtx 295 maybe gtx 285.. you cannot run gtx 295 in tri sli..in conformity faced with the fact, reason, truth, or some standard of principle; i am correct: the right solution; the right answer
i know that. but that guy fearlessfighter2006 is trying to tell me that he or his friend is running them in tri sli ... so i am telling him that he is full of it.
lol, how could it possible if there is no even a scond port for SLI lmao ,, Or, he might have bought it for decoration , u no, 3 cards look better than 2 together
I believe you can run it in 3 mode by selecting 3 sli compatibility therfore using two gpus on one of the cards and only one on the other. However you can not run three gtx295 cards as that would be septa sli which does not exist!
Just keep in mind when ur overclocking it to 2000MHz that a higher frequency means nothing without low latencies as well. depending on ur timings it might even be slower than DDR2 with the higher frequency.
men, please help me, i have asus rampage 2 extreme and i want to buy this memory but in mobo specification is writting '' 1600mhz (OC) and 1800mhz (OC)'' so dominators should working good ?? i must oc it? ?
I was looking at 3gb(3x1gb) of these memories(each 1600mhz), then i say the same as 3x3gb with 1600mhz, 6 gb. So that means 1600mhz x 6, right? please anwer.
I mean those with 3 moduls, with 1 gb each, making it 3 gb of ram. They are 1600 mhz on 1 modul. 1gb(one modul) is 1600mhz. But what about the ones with 1 modul with 2 gb, says 1600mhz? so that means it is 800mhz on each 1gb?
oo i understand what you mean the size of the chip as storage 1GB 2GB 4GB does not matter the speed is 1600mhz! its a separate thing if you know what i mean so the 1GB and 2GB run @ 1600mhz the 2GB is not 2x1GB chip running at 800mhz its a bigger chip of 2GB running @ 1600! hope that claryfies it! =)
I had to return my G.skill 6GB 1600mhz kit within a week of having it a stick died and the other two sticks were BSODing too and I noticed some other strange events on the event viewer so I took it back to the place I bought it and he replaced it on the spot and now no issues :D.
Only thing that pisses me off is that today being his end off year sale is that the 1600mhz 6gb G.skill kit is $200 AUD cheaper so I got burnt by buying early :(.
I have picked up two sets of Corsair ram with at least one bad chip in each. One of my original 2 GB chips from my original 8gb kit is jacked, and one of the the 4mb chips from the 16gb set was toast. Last time with the Corsair for me.
MurphysLaww 2 months ago
Your OCZ probably wasn't on your motherboards qualified ram vender list. If they were and they're still causing your system to crash then you were either pushing them too hard, or if your not overclocking then thats pretty much a sure sign that they are defective. Try to send them back before its too late.
SlaughteredInside 5 months ago
@di41591 what did you got on the wei score? just wondering :P
plutoguerra 8 months ago
Dude when you make a video don't for the love of god put music over your voice
john0022 1 year ago
i think 4 gb ram is HUUGE!
gizme123 1 year ago
i have 8g of OCZ and its fine :P
Agremen 1 year ago
do u have birds in ur house? i can hear budgies in the back lol
MASTRCHIEFMOE 1 year ago
hey, if u use an i7 rig watch out for the voltage ! These Dominators already have the highest voltaged that Intel considers as safe.So don't give them too much "food" or u can say byebye to your i7 cpu.
czolgista999 1 year ago
Music? :D
allleafs 1 year ago
Whatever somes with a OCZ sticker is a piece of shit.
Getting OCZ emory to work stable is pure luck because they brand their memory 'DDR3-1600 CL9' without testing them.
Nopiw 1 year ago
how much do they cost each ?
1235242 1 year ago
so sad my country only sells 2gb pieces~ T_T i cant find any like 4gb piece or 6gb piece~ T_T i fucking want to make my pc 16gb~ now i have 8gb only~ 2gb x 4~
zomgbbqwth 1 year ago
stupid
ypaul123 2 years ago
try putting in one stick at a time. also check and see how much your version of windows supports.
johnyrockshell 2 years ago
@johnyrockshell im pretty sure he has 64 bit :)
hille32 2 years ago
your throwing it out? are you throwing it in the bin? that would be a waste
carvedeye 2 years ago
doe the sus m4a78t-e support this awesome kickass ram ?
multimodder 2 years ago
lol your a tard im not fibbing i set my max fps to 250 to 300 in most games dumb dumb lol i love when ppl try to be smart and fail
i i detect a dumbass
dhkenny2001 2 years ago
i am sorry who are u talking 2????
di41591 2 years ago 4
@di41591 yer... lol?
WOLFT3CH 1 year ago
Im going for the 8gb Corsair dominator ddr3 1600mhz to my amd system :)
tredecker 2 years ago
yes u can run 2 295s in sli and and a third in a phix mode it is point less mind u but u can u dont need to run a phix card with even 1 295 fuck i have 1 295 and i dont think 2 would make any diff really cause im already getting max fps in cod 4 cod 5 waw and all my other games 2 is just a wast and using 1 for phix is just dumb ass hell what a wast of money and a good gpu
dhkenny2001 2 years ago
as long as youve got all the graphics turned up and unlocked there is no maximum fps i detect a fibber
Sheepanator93 2 years ago
@dhkenny2001
With a 295 you might want to play Crysis. Look it up if you haven't heard of it. Games like Call of Duty are made cheap and the developers only want your money. They barely made the game look different from its console versions...
purewolfgod1 2 years ago 3
yeah never buy ocz they suck the nuts big time always go with corsair or Kingston
best ppl for ram
dhkenny2001 2 years ago
yes yes YES i am with you CORSAIR and KINGSTONE is realy the besrt yeah man.
Zico10101010 2 years ago
Had my OCZ DDR2 for about 3 years now, no problems on a fully overclocked system (Q6600 @ 3.0ghz)
However, Monday will be the sad, sad day I throw it out due to the fact I have just ordered my new parts, and seeing as I'm switching up to an i7 platform I ordered 12 gigs of Corsair XMS3.
So goodbye OCZ RAM, you have served me well. Don't listen to people who say OCZ sucks, because its a laster.
UnrealGlider 2 years ago
Yeah, I would take Corsair over OCZ anyday
richy123xd 2 years ago
Hate that friggin' annoying background music....can barely hear what you're saying.
grey2fox 2 years ago 5
Comment removed
1Ali380 2 years ago
where could i buy these im bulding an i7 extreme system which I want to max out. i7 ext ed 3 295 gtx oc water cooling etc... I couldn't find this on newegg. thnx
fearlessfighter2006 2 years ago
Comment removed
1Ali380 2 years ago
This has been flagged as spam show
NEWEGG or Compusa or Tigerdirect
Type in the Search Box: TR3X6G1600C8D
Price:
Thursday 09 April 2009: $166.00+
Only 1 Set:
(CORSAIR DOMINATOR 6GB (3 x 2GB)
1Ali380 2 years ago
why is the author keep on removing your comment though?
fearlessfighter2006 2 years ago
fearlessfighter2006:
lol no I removed it my self (I wrote faulty some information in the previous comments).
1Ali380 2 years ago
2 295 gtx is is enough a third will ad about 10% more performace wich imo pointless
cartentis 2 years ago
true however while rather just hanging around on the dust i'll be able to use it on another pc which i'll probably do for my guests :)
fearlessfighter2006 2 years ago
you cant run 3 gtx 295 cause they are dual card you can only run 2
StickGuy0000000001 2 years ago
you can. please see NVIDIA
fearlessfighter2006 2 years ago
you can not run 3 gtx 295 !! dude u suck
RockaFeller467 2 years ago
Oh then why the hell does my friend run 3 sli 295gtx on i7 xtreme moron!
fearlessfighter2006 2 years ago
dude you can not run 3 gtx 295! there are only quad set up.. you can only run 2 of them in sli. if your friend is running 3 then post a video response of it... but i think you are on crack
RockaFeller467 2 years ago
lolz I'll post it when I see him He's not that near though so it may take sometime. Also I don't do crack and that shit so be careful on what your saying.
fearlessfighter2006 2 years ago
you are a person lacking ordinary quickness and keenness of mind;characterized by or proceeding from mental dullness due to lack of meaning or sense; you are in a state of stupor. do your home work. he is running something other then 3 gtx 295 maybe gtx 285.. you cannot run gtx 295 in tri sli..in conformity faced with the fact, reason, truth, or some standard of principle; i am correct: the right solution; the right answer
RockaFeller467 2 years ago
you can run 3 gtx295s , ,, 2 of em in sli and one for physics or cuda
bigdima3 2 years ago
i know that. but that guy fearlessfighter2006 is trying to tell me that he or his friend is running them in tri sli ... so i am telling him that he is full of it.
RockaFeller467 2 years ago
lol, how could it possible if there is no even a scond port for SLI lmao ,, Or, he might have bought it for decoration , u no, 3 cards look better than 2 together
bigdima3 2 years ago
no you cant
NickelxK5 2 years ago
I believe you can run it in 3 mode by selecting 3 sli compatibility therfore using two gpus on one of the cards and only one on the other. However you can not run three gtx295 cards as that would be septa sli which does not exist!
neib83 2 years ago
how much they where?
luisronaldofigo 3 years ago
450 dollars
Xenios123 3 years ago
rofl? $450 u can get urself a 30' lcd tv. I rather not get dominator bcuz they're plastic and metal taht's y they cost more.
asianpridefOru 3 years ago
Just keep in mind when ur overclocking it to 2000MHz that a higher frequency means nothing without low latencies as well. depending on ur timings it might even be slower than DDR2 with the higher frequency.
psycopyro001 3 years ago
wait for the corsair Dominator Gt's man. theyre triple channel DDR3's 2000 Mhz at Cl-7 at 1.65v. incredible, just gotta wait tull theyre out
asilayloathing 3 years ago
the corsir beats the azz off everything elce the ddr2 is the fastest ddr2 in the world fact. i have it.
mastainventa 3 years ago
the corsir runs at 2.4 volts standard
mastainventa 3 years ago 2
its the voltage noob check the timeings and voltage yr mother board may not set the timeings and voltage to the optimum timeings
mastainventa 3 years ago
set to 1.65 voltage and 9-9-9-28 just like it said anyway it works with updated bios
jfrydom 3 years ago
should have bought corsair bought some ocz 1866 but wont overclock on R2E pissed i payed extra for slow speeds
theres dominator 1866 with the airflow fan on newegg
jfrydom 3 years ago
you can oc the 1866mhz to 2000 and more
mace2142 3 years ago
again back to corsair
veca1987 3 years ago
Yea, it works great
di41591 3 years ago
men, please help me, i have asus rampage 2 extreme and i want to buy this memory but in mobo specification is writting '' 1600mhz (OC) and 1800mhz (OC)'' so dominators should working good ?? i must oc it? ?
neoonik16 3 years ago
The ones that i have no issue with the M/B, and no you don't have to overclock them.
di41591 3 years ago
so memory should work good??
neoonik16 3 years ago
Yes, no problem at all
di41591 3 years ago
I was looking at 3gb(3x1gb) of these memories(each 1600mhz), then i say the same as 3x3gb with 1600mhz, 6 gb. So that means 1600mhz x 6, right? please anwer.
krirre 3 years ago
i dont understand sorry, try to explain better and i will help you, reply to this not just comment
EnT271 3 years ago
3x3 =9 m8 lol... but they all run at 1600 mhz what is your question again lol?
sale666 2 years ago
I mean those with 3 moduls, with 1 gb each, making it 3 gb of ram. They are 1600 mhz on 1 modul. 1gb(one modul) is 1600mhz. But what about the ones with 1 modul with 2 gb, says 1600mhz? so that means it is 800mhz on each 1gb?
krirre 2 years ago
oo i understand what you mean the size of the chip as storage 1GB 2GB 4GB does not matter the speed is 1600mhz! its a separate thing if you know what i mean so the 1GB and 2GB run @ 1600mhz the 2GB is not 2x1GB chip running at 800mhz its a bigger chip of 2GB running @ 1600! hope that claryfies it! =)
sale666 2 years ago
Yes, thank you :) I have the 6Gb kit of ddr3 dominator anyway :P
krirre 2 years ago
Dam I want that song :O.
I had to return my G.skill 6GB 1600mhz kit within a week of having it a stick died and the other two sticks were BSODing too and I noticed some other strange events on the event viewer so I took it back to the place I bought it and he replaced it on the spot and now no issues :D.
Only thing that pisses me off is that today being his end off year sale is that the 1600mhz 6gb G.skill kit is $200 AUD cheaper so I got burnt by buying early :(.
Roly702 3 years ago
Yea that happens to me 2 lol
di41591 3 years ago