I know why I put the LCD on my iPod touch 3G LCD does not light c that's normal with the touch screen you can see he walks the light of the start iPod touch 3G
@JFCRAZE000 Guitar picks work great, as do small flat head screwdrivers (if you are familiar with disassembling iTouch's). Plastic pry tools are your best bet if this is your first repair. Some local repair shops may have these or a few other options available.
@UniversalHere That is the adhesive that holds the touch screen to the mid frame. You will need to get below the mid frame, so you are prying between the plastic and metal housing.
@iloilokicks I would just double check the generation (type the model number on the back case into a search engine). If it is a 3rd generation, you will need a 3rd gen - as the 2nd and 3rd are NOT cross compatible. These are available at RepairsUniverse (dot) com.
i have a really stupied question... when you drop an ipod and the screeen cracks but the ipod still functions are the cracks on the digitizer or the actual lcd screen?
@bugboy357m Not a stupid question at all. The outer glass screen is called the "touch screen digitizer", this is normally cracked in a spider web type pattern and is the most common damage. LCD damage would be issues with the display, such as dead pixels, backlighting, etc.
The part you will need is the touch screen digitizer. Replacements are available at RepairsUniverse (dot) com.
@richfahad No, this should not effect anything long term. It is suggested to keep this foil in place, however we have never had an issue if the foil is missing - even after a few years of use.
ive gotten the screen off, but ive come to replace the digitizer and realised that my ribbon cable is different to the original one, im not sure how i would go about placing it as i dont want to break it, can you help me please!
@samanthalucindat Possible the replacement screen is the wrong generation. This is very common. Especially with 8GB 3rd generations, which use 2nd generation digitizer (technically are 2nd generation but sold as 3rd.)
I would suggest typing your model number into a search engine, you should be able to determine your correct generation from there.
My 3rd Gen iPod Touch started flicking little horizontal white lines, now it's just a big flickering white screen(hard to make out whats on the screen). I tried Restarting it by holding the power and home button, but its still flickering. What do you recommend on doing?
@jacknumber13000 No problem. This is an issue with the LCD screen. Sometimes this is caused by water damage, drops, or loose connections. It is normally worth disassembling the device and checking the LCD connection. If the connection appears fine, I would suggest replacing the LCD screen. These are available at RepairsUniverse (dot) com.
@SaeYoumi This may cause issues down the road, it would depend on the exact resistor that was damaged. We have seen some work for years after, others may die instantly. Purely depends on what was damaged.
please help! i put my ipod in my pocket w/ hand sanitiser and it spilled on my ipod. the ipod works but theres liquid inside the screen and idk how to fix it!!! plz help!
@stickfigpro I would suggest removing the outer touch screen assembly (following this video) and attempt to clean it up from there. Hopefully it will clean right up, but possibility the sanitizer will damage the LCD screen itself, in which case a replacement would be required. These are available at RepairsUniverse (dot) com.
@jamazeon You will need to remove the home button from your old digitizer, it is normally just held in place between the touch screen and the mid frame / home button flex. Place the home button inside the new digitizer and then install the mid frame. Be sure the tabs located on each side of the button are seated properly. Everything should just pop into place from there.
@slwilson21 Unsure who you ordered from previously, but you may be able to return it? If not, check out our parts at RepairsUniverse (dot) com, we will take care of you and get the issue resolved. We stand by the parts we sell.
The digitizers were purchased brand new. They all worked on my other iPod. The un responsive one worked fine until it fell out of my pocket. When it fell the digitizer cracked so I replaced it. But no response. When it fell the top right corner hit first.
@slwilson21 Hmm, I wasn't sure but seems a bit more likely now that the digitizer you replaced it with is either not connected properly or is a faulty part. May be worth checking out the connection and considering a replacement if the connection looks good.
I have a 2nd gen 16gb iPod touch that doesn't respond to touch. I've replacd the digitzer 3 times, all brand new digitizers, and it still doesn't respond. Do you know why this could be?
@slwilson21 Hmm, could be an issue with the motherboard, or the connection located on the motherboard then. Have any of them worked for even a few days? Or all are completely non responsive? Has the iTouch ever been water damaged?
@kakashitocool I do not believe we are currently offering that repair service. As the holiday season comes up, we become very busy with repairs and limit the types of repairs available. We can still offer the part and repair guide though. Feel free to contact directly if you have any other questions.
all of the screen repair videos on here have guys with their little plastic tools taking off a stuck on screen, in reality that is very hard for the average person, using those dinky plastic things in reality dont work unless you get them down right, i have taken off about 15 ipod touch screens and know what im talking about, i roll with the swiss army to help me take off my screens.
@supportmytroups7 It is very true, more experienced techs use a more sturdy pry tool or flat head screwdriver, however for novices this is very dangerous. Plastic will not scratch the housing and is softer than many of the parts, meaning less damage. But once you know the process, a more sturdy pry tool will cut down the work quite a bit.
i was using my ipod last tuesday and all of the sudden the screen went white while i was using it. i tried to reset it with the hoe and sleep button but it went black and now i cant do anything on it my computer wont recognize it and i cant use it at all. do you have any ideas whats wrong?
@onesis5 That does not sound too good.. Sounds like a motherboard issue. These are very difficult to diagnose without it being in front of us. I would suggest taking it to a local repair shop and getting it diagnosed.
@onesis5 I would suggest disassembling the iTouch and checking around for major connection issues or damage to the motherboard. If you don't feel comfortable doing this, take it to a shop for diagnosis. From there you can determine if it is cost effective to repair.
Okay I had dropped my iPod sreen first and since then it has the white screen but if I coonnect my earphones and I hear music and I can still hear the noises it makes when I connect it to the computer and iTunes reads it
@Blackopskillsmw2 Sounds like either LCD damage or the LCD flex cable has been jarred loose (less likely but always worth a check). Replacing the LCD will resolve the issue. These are available at RepairsUniverse (dot) com.
@Blackopskillsmw2 Difficult to say, will depend on what caused the white screen. Normally a LCD screen replacement will resolve, but there are chances it is not the fault of the LCD screen and could be the motherboard. But the cheapest and most likely way to resolve would be replace the LCD screen. And digitizer if it has been damaged. All these parts and tools can be found at RepairsUniverse (dot) com.
If my lighting still works, well the whole ipod works, but the slide button isn't working it doesnt slide. or like when i touch the ipod it doesn't react at all, but the lighting works and the music too, will replacing the screen solve the problem to why it doesn't react to when i touch it?
@LittleSenia This is the touch screen digitizer that will control this. I would suggest checking the connection to be sure it is fully in place. If it appears fine, I would suggest replacing the touch screen digitizer. These can be found at RepairsUniverse (dot) com.
@oliwer200 The pry tools are made of plastic which will not scratch or damage the housing/screen/internals (when used properly). A metal pry tool is much more effective but can cause damage and should only be used if you have experience.
@x64KiLLax This can be caused by a few things. The most common reason would be the wrong LCD gen was used. It may be your iPod Touch is a 2nd gen, not a 3rd. This is a common mistake.
How the hell did you get it to come apart so easily. First the plastic removers broke when I tried to use them, then the screws on the metal plate wouldn't come out.
Screw apple and their shitty customer service and non-user friendly design.
@heroicbalthier Some are more stubborn than others, depends on history, manufacture date, etc. Removing the plastic mid frame is a bit tedious, just take your time. As for the screws, make sure you are using the correct size of phillips screwdriver. Also a small bit of penetrating fluid on a Q-Tip can help loosen these off. If that doesn't work you can use a screw extractor to remove the stuck screws.
If the iPod won't even turn on, could it still be the LCD screen that is the issue? I've just opened mine up and the only thing I can see that looks remotely out of place is the LCD screen - it seems to have bled.
@Steheath1992 If it is not recognized by a computer or charger, that is not a very good sign. Normally this means the motherboard may have been damaged. A local repair shop may be able to give you more information and diagnose the issue. There are just too many variables to diagnose from afar.
@Steheath1992 If it is not recognized by a computer or charger, that is not a very good sign. Normally this means the motherboard may have been damaged. A local repair shop may be able to give you more information and diagnose the issue. There are just too many variables to diagnose from afar.
I got a little water damage, but i dried it out and everything. So i just charged it and now the back light is really low and i cant use the touch screen.
@sasquatch446 I would check the connections for issues and damage. However water damage is tricky, as damage to the motherboard can cause similar issues. If you feel confident that the LCD and touch screen are at fault, replacing these can likely resolve the issue. Replacement screens and tools for the iPod Touch are available at RepairsUniverse (dot) com.
@RepairsUniverse I did pry it apart last night, to find the ribbon but right in half, so I'm gonna buy a new screen and see if there is anything else wrong. Thanks for your help.
@FuNkWaD19 This is an issue with the touch screen digitizer. I would check that the touch screens flex cable is fully in place and securely connected. If everything looks fine, replacing the screen should resolve the issue. You can find replacement screens, tools, and parts at RepairsUniverse (dot) com.
Hey thanks for the tutorial! My brother had a spare digitizer and mid frame for me, except the mid frame has a metal plate with no flex cable. If i take the flax cable metal plate from the ipod i am replacing, can i put that on it? because if i take the original metal plate off of the mid frame he gave me can i put the other one on or will it break those little black dots the hold the metal plate on? please reply :)
@juiceboxmen You can transfer those over easily enough. you will need to break the black tabs holding the old one in place and either melt the tabs down on the new one, use adhesive strips to hold it in place, or use glue / hot glue to keep it stationary. Usually a simple swap.
@zabingsterdio Have you replaced the LCD screen? Was there a drop or any damage that you can think of that caused the issue, such as a recent take apart? Usually this is just caused by a faulty LCD screen and a replacement should resolve the issue. Check out RepairsUniverse (dot) com for replacement screens and parts for the iPod Touch 3rd Gen.
i fixed my digitizer but now when i plug in brand new headphones it sounds as if there broken and the songs restart but when i play out of the speaker it sounds fine do i need to take it it off and tighten the screws next to the auido jack
Also with my turtle beach x11 headphone usb powered it sounds much better but i have to keep it on a medium volume or the sound messes up as if it where the headphones above
ill thumbs up your vid it help very much as i was taking off the old digitizer
@donahkebabnah That does seem a bit odd. I would suggest disassembling and making sure the headphone jack is not damaged and fully connected. Check for damage to the flex cable as well. Making sure it is securely in place may help, but not likely to cause the issue.
I have my brothers ipod touch (4gen) and my ipod touch (3gen) And my brother cracked his screen and my just like, died. My question is, can you replace a 4th generation Ipod Touch screen with an Ipod Touch 3rd generation screen?
My iPod touch works , but the screen is kind of too bright, and white-ish but still transparent, and sometimes there are many horozontal lines that appear and disappears, and it will blink to normal for a second then go back to this white-ish screen. And if u look closely, u can see tiny lines vertically and horizontally that look like they're quivering. What can I do?
@candyapple1766 I would check the LCD screen flex cable. Make sure it is fully connected into the connector. If the connections seems good, I would suggest replacing the LCD screen.
Hi buddy, great video. My sisters daughter has managed to get a piece of plastic from her bling bling case inside headphone jack socket so the jack will not go in fully, I can see the offending piece of plastic inside the socket, is it easy to get to after the front has been removed? Cheers for any help.
@borry2008 Thank you! Yes the headphone jack is very accessible. Following this guide should gain you access. Sometimes it is too difficult to remove these foreign objects, making replacing them the best option. We have replacements available at RepairsUniverse (dot) com.
To be honest got the front off but have made a real mess of it, the headphone part needs replacing, the strip that connects the screen snapped and the housing also will need replacing, been a bit of a disaster. Can you help with these parts? Trouble is being UK based and you being in the USA it will take you some time for the parts to arrive.
@borry2008 Wow, quite the mess! Of course we can help you out, I suggest using the "contact us" page, located in the top right corner of the RepairsUniverse (dot) com homepage. Our sales staff will walk you through everything you need. As for the international shipping, we usually get packages to the UK in a week, so not too long of a wait time. Shoot us an email and we'll help get your iPod working again!
Oh wow, this is slightly intimidating. I've replaced iPod video batteries before, but this seems a little more touchy. I got a free 3rd gen iTouch from my friend, with a broken LCD/digitizer. Looks like I'm going to take a bit of a gamble on replacing it....
@GibsonSGKing The iPod Touch's may seem intimidating, but really its quite simple, you shouldn't have too much of an issue with the repair. Just follow the video carefully! Good luck!
@JST1324 It is possible, if the LCD screen is faulty or has some sort of issue connecting to the motherboard. Check some of the forums out for info on white screens, there are quite a few ways of diagnosing the issues. Good luck!
@liljjbo17 You can replace the glass touch screen digitizer. We have another video showing that repair and we also have the replacement screens available at RepairsUniverse (dot) com.
@mattisproff4 You can try using a small flat head, but scratches are inevitable. Using our plastic safe open pry tools are the best option to make sure you don't damage your screen or housing. They are available at RepairsUniverse (dot) com.
I have some scrap stuck under the protection screen of my Ipod Touch. I have treated it very well for over a year, it has no scratches and I always have a protection skin on it but somehow dirt from my pocket managed to slip under the glass and it is really disturbing me. Will removing the protection screen like on this video let me clean the inner LCD screen? Where can you get that tool from?
@mattisproff4 Yes, disassembling your iPod should give you access to that irritating dirt in your screen. You can find all the tools used in the video at RepairsUniverse (dot) com.
@FrEsHtOdEaTh1997 You can look up ways to remove stripped screws, we rarely run across the issue however. Luckily these screw are not overly strong so there should be no issue removing it if you find a decent guide. Good luck!
@ejls1997 You can find replacement parts for your iPod Touch 3rd gen at RepairsUniverse (dot) com. All of our screens include a safe open pry tool free of charge. Other tools are available as well on the website.
@71Racin Could be an issue with the LCD screen. Might open it up and check for connection issues, if now, replacing the LCD screen may be the way to go. You can find screen replacements at RepairsUniverse (dot) com.
can you please make a video about how to replace the housing(the metal back cover) please every step of it from the taking apart to the putting back together. also are the screws identical or do i have to remember which screw went where.
can you please make a video about how to replace the housing(the metal back cover) please every step of it from the taking apart to the putting back together. also are the screws identical or do i have to remember which screw went where.
@Tubby7thst Your touch screen is broken. You will need a replacement touch screen digitizer to fix this issue. We have these replacement parts at RepairsUniverse (dot) com
My ipod touch screen has pretty much been shattered. The ipod still picks up finger movement in certain places. If i remove the glass screen and keep it off, would it be fully functional again?
@XshadowXkilla90X You will need a replacement touch screen digitizer. This will replace the cracked glass and the touch screen at the same time. You can find this part @ RepairsUniverse (dot) com
i need help with this, as far as i know ive done everything right but when i turn on the lcd all i get is a blank screen but the backlight is working just no picture
@TFKTE Just replace the glass then. Don;t replace the LCD if you don't need too :) This is the LCD video. We have a video showing the touch screen replacement. You can find this at RepairsUniverse (dot) com
@KnowWhat1Hate Dude im not complaining, i asked for help and nothing else and obviously i did look it up hence I watched this video. Save your ignorant comments for your butt buddies on Xbox live.
When replacing my LCD due to the backlight going because it went through the washing machine, it all went well and the backlight started working again. However, later on it stopped working again. Is this an issue with the LCD or something else?
Your prices are too high
SolidSnake013Duds 7 hours ago
Hi my ipod touch has a cracked screen and the touch does not work........ is the touch compenent in the LCD screen?
shabangabang89 21 hours ago
My ipod touch's screen works it's just hard to see because it is not lit up is this what i need to do to get it lit up?
melikepizzapie 2 days ago
@melikepizzapie This is the backlight, which is displayed through the LCD but controlled by the motherboard. Either of these can be at fault.
Does your device have any history - such a water damage, major drops, previous repairs, etc?
RepairsUniverse 2 days ago
Can you buy a replacement LCD from an iPod Touch 4G and use it on your 3G? Is it compatible?
baldolera 3 weeks ago
@baldolera No, sadly all of the iPod Touch LCD screens are only compatible with its specific model.
RepairsUniverse 3 weeks ago
I know why I put the LCD on my iPod touch 3G LCD does not light c that's normal with the touch screen you can see he walks the light of the start iPod touch 3G
TheYenil 1 month ago
my lcd wont work now at 220 on the VD it shows a small plast i think i broke that
0SgtNick 1 month ago
@0SgtNick Sounds very likely. I would suggest replacing the LCD screen.
RepairsUniverse 1 month ago
is there anyother tool i can use or another store that sells them??
JFCRAZE000 1 month ago
@JFCRAZE000 Guitar picks work great, as do small flat head screwdrivers (if you are familiar with disassembling iTouch's). Plastic pry tools are your best bet if this is your first repair. Some local repair shops may have these or a few other options available.
RepairsUniverse 1 month ago
Where can I find that tool?
elMazza007 1 month ago
@elMazza007 Safe open pry tools can be found at RepairsUniverse (dot) com under "Repair Tools"
RepairsUniverse 1 month ago
there seems to be some kind of rubber thing between the screen and the chrome back cover
UniversalHere 1 month ago
@UniversalHere That is the adhesive that holds the touch screen to the mid frame. You will need to get below the mid frame, so you are prying between the plastic and metal housing.
RepairsUniverse 1 month ago
I don't have a "safe open pry tool." I'm using a credit card.
LibertatemPopuli 1 month ago
I have an IPod Touch 3rd Gen 8gb, What LCD should I buy?
iloilokicks 1 month ago
@iloilokicks I would just double check the generation (type the model number on the back case into a search engine). If it is a 3rd generation, you will need a 3rd gen - as the 2nd and 3rd are NOT cross compatible. These are available at RepairsUniverse (dot) com.
RepairsUniverse 1 month ago
How do I put it back together after I have replaced the lcd screen?
kUiPeRnAtOr 1 month ago
@kUiPeRnAtOr Simply reverse the instructions given in the video. Just be sure the new connection of the LCD screen is fully in place.
RepairsUniverse 1 month ago
i have a really stupied question... when you drop an ipod and the screeen cracks but the ipod still functions are the cracks on the digitizer or the actual lcd screen?
bugboy357m 1 month ago
@bugboy357m Not a stupid question at all. The outer glass screen is called the "touch screen digitizer", this is normally cracked in a spider web type pattern and is the most common damage. LCD damage would be issues with the display, such as dead pixels, backlighting, etc.
The part you will need is the touch screen digitizer. Replacements are available at RepairsUniverse (dot) com.
RepairsUniverse 1 month ago
hey i took the thin foil off by mistake is this gonna be a problem...............
richfahad 1 month ago
@richfahad No, this should not effect anything long term. It is suggested to keep this foil in place, however we have never had an issue if the foil is missing - even after a few years of use.
RepairsUniverse 1 month ago
ive gotten the screen off, but ive come to replace the digitizer and realised that my ribbon cable is different to the original one, im not sure how i would go about placing it as i dont want to break it, can you help me please!
samanthalucindat 1 month ago
@samanthalucindat Possible the replacement screen is the wrong generation. This is very common. Especially with 8GB 3rd generations, which use 2nd generation digitizer (technically are 2nd generation but sold as 3rd.)
I would suggest typing your model number into a search engine, you should be able to determine your correct generation from there.
RepairsUniverse 1 month ago
Hi @RepairsUniverse, thank you for you video. But I need help.
My 3rd Gen iPod Touch started flicking little horizontal white lines, now it's just a big flickering white screen(hard to make out whats on the screen). I tried Restarting it by holding the power and home button, but its still flickering. What do you recommend on doing?
jacknumber13000 1 month ago
@jacknumber13000 No problem. This is an issue with the LCD screen. Sometimes this is caused by water damage, drops, or loose connections. It is normally worth disassembling the device and checking the LCD connection. If the connection appears fine, I would suggest replacing the LCD screen. These are available at RepairsUniverse (dot) com.
RepairsUniverse 1 month ago
@RepairsUniverse Thank You!! :)
jacknumber13000 1 month ago
@jacknumber13000 No problem at all! Good luck!
RepairsUniverse 1 month ago
hi broke a little resistor or capacitor under the metal shield. It was only one but the ipod still turns on. How will this affect the long term?
SaeYoumi 2 months ago
@SaeYoumi This may cause issues down the road, it would depend on the exact resistor that was damaged. We have seen some work for years after, others may die instantly. Purely depends on what was damaged.
RepairsUniverse 1 month ago
What kind of pryor are you using??
ilovebama1985 2 months ago
@ilovebama1985 This is a plastic safe open pry tool, available at RepairsUniverse (dot) com.
RepairsUniverse 2 months ago
please help! i put my ipod in my pocket w/ hand sanitiser and it spilled on my ipod. the ipod works but theres liquid inside the screen and idk how to fix it!!! plz help!
stickfigpro 2 months ago
@stickfigpro I would suggest removing the outer touch screen assembly (following this video) and attempt to clean it up from there. Hopefully it will clean right up, but possibility the sanitizer will damage the LCD screen itself, in which case a replacement would be required. These are available at RepairsUniverse (dot) com.
RepairsUniverse 2 months ago
@RepairsUniverse thx that helped a lot! :)
stickfigpro 2 months ago
@stickfigpro No problem at all!
RepairsUniverse 2 months ago
My iPod broke just now -___- well Been having it for 3 years
calfone916 2 months ago
@calfone916 Save it! Whats the issue?
RepairsUniverse 2 months ago
I WHACHED FOR THE HELL OF UT EVEN KNOW MY IPOD IS 4g
mortalmarshy 2 months ago
How do you switch the home button from one ipod to the other? I order the screens but had no home button with it.
jamazeon 2 months ago
@jamazeon You will need to remove the home button from your old digitizer, it is normally just held in place between the touch screen and the mid frame / home button flex. Place the home button inside the new digitizer and then install the mid frame. Be sure the tabs located on each side of the button are seated properly. Everything should just pop into place from there.
RepairsUniverse 2 months ago
Ok, I'll try again. This will be the fourth brand new digitizer. I'll order one in a few days.
slwilson21 2 months ago
@slwilson21 Unsure who you ordered from previously, but you may be able to return it? If not, check out our parts at RepairsUniverse (dot) com, we will take care of you and get the issue resolved. We stand by the parts we sell.
RepairsUniverse 2 months ago
Oh and the iPod hasn't been water damaged.
slwilson21 2 months ago
The digitizers were purchased brand new. They all worked on my other iPod. The un responsive one worked fine until it fell out of my pocket. When it fell the digitizer cracked so I replaced it. But no response. When it fell the top right corner hit first.
slwilson21 2 months ago
@slwilson21 Hmm, I wasn't sure but seems a bit more likely now that the digitizer you replaced it with is either not connected properly or is a faulty part. May be worth checking out the connection and considering a replacement if the connection looks good.
RepairsUniverse 2 months ago
This has been flagged as spam show
@RepairsUniverse dammit cracked my ipod screen with a guitar pick while doing this... do you sell ipod touch 3rd gen screens?
GabrielHawkPot 2 weeks ago
I have a 2nd gen 16gb iPod touch that doesn't respond to touch. I've replacd the digitzer 3 times, all brand new digitizers, and it still doesn't respond. Do you know why this could be?
slwilson21 2 months ago in playlist More videos from RepairsUniverse
@slwilson21 Hmm, could be an issue with the motherboard, or the connection located on the motherboard then. Have any of them worked for even a few days? Or all are completely non responsive? Has the iTouch ever been water damaged?
RepairsUniverse 2 months ago
how much will it cost for you to repair the charge port for ipod touch 3rd gen?
kakashitocool 2 months ago
@kakashitocool I do not believe we are currently offering that repair service. As the holiday season comes up, we become very busy with repairs and limit the types of repairs available. We can still offer the part and repair guide though. Feel free to contact directly if you have any other questions.
RepairsUniverse 2 months ago
all of the screen repair videos on here have guys with their little plastic tools taking off a stuck on screen, in reality that is very hard for the average person, using those dinky plastic things in reality dont work unless you get them down right, i have taken off about 15 ipod touch screens and know what im talking about, i roll with the swiss army to help me take off my screens.
supportmytroups7 2 months ago
@supportmytroups7 It is very true, more experienced techs use a more sturdy pry tool or flat head screwdriver, however for novices this is very dangerous. Plastic will not scratch the housing and is softer than many of the parts, meaning less damage. But once you know the process, a more sturdy pry tool will cut down the work quite a bit.
RepairsUniverse 2 months ago
i was using my ipod last tuesday and all of the sudden the screen went white while i was using it. i tried to reset it with the hoe and sleep button but it went black and now i cant do anything on it my computer wont recognize it and i cant use it at all. do you have any ideas whats wrong?
onesis5 2 months ago
@onesis5 That does not sound too good.. Sounds like a motherboard issue. These are very difficult to diagnose without it being in front of us. I would suggest taking it to a local repair shop and getting it diagnosed.
RepairsUniverse 2 months ago
@RepairsUniverse
thanks for telling me but i hope it cost less to repair then get a new one
onesis5 2 months ago
@onesis5 I would suggest disassembling the iTouch and checking around for major connection issues or damage to the motherboard. If you don't feel comfortable doing this, take it to a shop for diagnosis. From there you can determine if it is cost effective to repair.
RepairsUniverse 2 months ago
I cracked my ipod screen where can i buy a new screen
MegaRocker33 3 months ago
@MegaRocker33 Replacements are available at RepairsUniverse (dot) com.
RepairsUniverse 3 months ago
Okay I had dropped my iPod sreen first and since then it has the white screen but if I coonnect my earphones and I hear music and I can still hear the noises it makes when I connect it to the computer and iTunes reads it
Blackopskillsmw2 3 months ago
@Blackopskillsmw2 Sounds like either LCD damage or the LCD flex cable has been jarred loose (less likely but always worth a check). Replacing the LCD will resolve the issue. These are available at RepairsUniverse (dot) com.
RepairsUniverse 3 months ago
i ordered a 2nd generation lcd screen will it work with my 32rd gen 8 gb?
Sharndip07 3 months ago
@Sharndip07 Yes, technically there is no 8GB 3rd Generations, but that can cause a lot of confusion. You have ordered the correct LCD.
RepairsUniverse 3 months ago
So I have a wSoD and I did everything and nothing worked do I just buy a new LCD and digitizer ? Because my old digitizer shattered?
Blackopskillsmw2 3 months ago
@Blackopskillsmw2 Difficult to say, will depend on what caused the white screen. Normally a LCD screen replacement will resolve, but there are chances it is not the fault of the LCD screen and could be the motherboard. But the cheapest and most likely way to resolve would be replace the LCD screen. And digitizer if it has been damaged. All these parts and tools can be found at RepairsUniverse (dot) com.
RepairsUniverse 3 months ago
Where can one of those pry tools be bought?
piemanbillybob 3 months ago
@piemanbillybob You can find these at RepairsUniverse (dot) com
RepairsUniverse 3 months ago
how much would it cost to do this at the apple store
steezygamer 4 months ago
@steezygamer 140$
mar400071 3 months ago
is it bad if the copper foil came off the lcd
xDxDRodxDx 4 months ago
@xDxDRodxDx It should not affect anything, however it is best if you can place the foil back if possible. Should not cause any issues though.
RepairsUniverse 4 months ago
If my lighting still works, well the whole ipod works, but the slide button isn't working it doesnt slide. or like when i touch the ipod it doesn't react at all, but the lighting works and the music too, will replacing the screen solve the problem to why it doesn't react to when i touch it?
LittleSenia 4 months ago
@LittleSenia This is the touch screen digitizer that will control this. I would suggest checking the connection to be sure it is fully in place. If it appears fine, I would suggest replacing the touch screen digitizer. These can be found at RepairsUniverse (dot) com.
RepairsUniverse 4 months ago
why do you need that safety tool when u could just open it with a knife
oliwer200 4 months ago
@oliwer200 The pry tools are made of plastic which will not scratch or damage the housing/screen/internals (when used properly). A metal pry tool is much more effective but can cause damage and should only be used if you have experience.
RepairsUniverse 4 months ago
@x64KiLLax same thing happens to me!
MrHellomoto444 4 months ago
Howcome when I reconnect the ribbon cable for the LCD screen, my iPod just stays blank and the screen stays white?
x64KiLLax 4 months ago
@x64KiLLax This can be caused by a few things. The most common reason would be the wrong LCD gen was used. It may be your iPod Touch is a 2nd gen, not a 3rd. This is a common mistake.
RepairsUniverse 4 months ago
what if the metalic tape holding the lcd screen is wrinkily is that bad?
Gentopenguin1 4 months ago
@Gentopenguin1 Nope, this will not effect the function of the iPod Touch at all. Try to keep it as neat as possible though.
RepairsUniverse 4 months ago
Can i use a 2nd gen digitiser on a ipod touch 3 gen
murdercom998 4 months ago
@murdercom998 No, these are different screens with a different connector. We have both screens at RepairsUniverse (dot) com
RepairsUniverse 4 months ago
Will an Iphone 3rd gen screen work for my Ipod Touch 3rd gen?
Gwolf3 4 months ago
@Gwolf3 Sadly no, the iPhone and iPod Touch screens are not cross compatible.
RepairsUniverse 4 months ago
r they magnetic?
tgodlington 4 months ago
how do the connectors go back down cuz i need to replace my lcd screen but i dont want to make it worse can you help me
tgodlington 4 months ago
@tgodlington They are simple pop connectors. You just need to apply a small bit of pressure on them and they click right into place.
RepairsUniverse 4 months ago
How the hell did you get it to come apart so easily. First the plastic removers broke when I tried to use them, then the screws on the metal plate wouldn't come out.
Screw apple and their shitty customer service and non-user friendly design.
heroicbalthier 4 months ago
@heroicbalthier Some are more stubborn than others, depends on history, manufacture date, etc. Removing the plastic mid frame is a bit tedious, just take your time. As for the screws, make sure you are using the correct size of phillips screwdriver. Also a small bit of penetrating fluid on a Q-Tip can help loosen these off. If that doesn't work you can use a screw extractor to remove the stuck screws.
RepairsUniverse 4 months ago
If the iPod won't even turn on, could it still be the LCD screen that is the issue? I've just opened mine up and the only thing I can see that looks remotely out of place is the LCD screen - it seems to have bled.
Steheath1992 5 months ago
@Steheath1992 It is quite possible. Is it recognized by a computer? Does it chime, etc when it starts up?
RepairsUniverse 5 months ago
@RepairsUniverse No it isn't recognised by anything, and it refuses to turn on. It's as if it's totally dead at the moment
Steheath1992 5 months ago
@Steheath1992 If it is not recognized by a computer or charger, that is not a very good sign. Normally this means the motherboard may have been damaged. A local repair shop may be able to give you more information and diagnose the issue. There are just too many variables to diagnose from afar.
RepairsUniverse 5 months ago
@RepairsUniverse Okay, thank you ever so much for your quick response and advice, you've been a big help!
Steheath1992 5 months ago
@Steheath1992 Not a problem at all. Good luck with your repair!
RepairsUniverse 5 months ago
@Steheath1992 If it is not recognized by a computer or charger, that is not a very good sign. Normally this means the motherboard may have been damaged. A local repair shop may be able to give you more information and diagnose the issue. There are just too many variables to diagnose from afar.
RepairsUniverse 5 months ago
Im watching this on a cracked iPod screen :(
iHasLight 5 months ago
I got a little water damage, but i dried it out and everything. So i just charged it and now the back light is really low and i cant use the touch screen.
sasquatch446 5 months ago
@sasquatch446 I would check the connections for issues and damage. However water damage is tricky, as damage to the motherboard can cause similar issues. If you feel confident that the LCD and touch screen are at fault, replacing these can likely resolve the issue. Replacement screens and tools for the iPod Touch are available at RepairsUniverse (dot) com.
RepairsUniverse 5 months ago
@RepairsUniverse I did pry it apart last night, to find the ribbon but right in half, so I'm gonna buy a new screen and see if there is anything else wrong. Thanks for your help.
sasquatch446 5 months ago
@sasquatch446 No problem. Good thinking. Hopefully the screen replacements will resolve the issue. Good luck with your repair.
RepairsUniverse 5 months ago
Could you help please, the last row of buttons on my ipod 3rd gen won't respond to touch
FuNkWaD19 5 months ago
@FuNkWaD19 This is an issue with the touch screen digitizer. I would check that the touch screens flex cable is fully in place and securely connected. If everything looks fine, replacing the screen should resolve the issue. You can find replacement screens, tools, and parts at RepairsUniverse (dot) com.
RepairsUniverse 5 months ago
Hey thanks for the tutorial! My brother had a spare digitizer and mid frame for me, except the mid frame has a metal plate with no flex cable. If i take the flax cable metal plate from the ipod i am replacing, can i put that on it? because if i take the original metal plate off of the mid frame he gave me can i put the other one on or will it break those little black dots the hold the metal plate on? please reply :)
juiceboxmen 6 months ago
@juiceboxmen You can transfer those over easily enough. you will need to break the black tabs holding the old one in place and either melt the tabs down on the new one, use adhesive strips to hold it in place, or use glue / hot glue to keep it stationary. Usually a simple swap.
RepairsUniverse 6 months ago
Ok so my ipod works but when i turn it on i cant really see the screen because its dim even though i tried to turn up the brightness.
zabingsterdio 6 months ago
@zabingsterdio Have you replaced the LCD screen? Was there a drop or any damage that you can think of that caused the issue, such as a recent take apart? Usually this is just caused by a faulty LCD screen and a replacement should resolve the issue. Check out RepairsUniverse (dot) com for replacement screens and parts for the iPod Touch 3rd Gen.
RepairsUniverse 6 months ago
i fixed my digitizer but now when i plug in brand new headphones it sounds as if there broken and the songs restart but when i play out of the speaker it sounds fine do i need to take it it off and tighten the screws next to the auido jack
Also with my turtle beach x11 headphone usb powered it sounds much better but i have to keep it on a medium volume or the sound messes up as if it where the headphones above
ill thumbs up your vid it help very much as i was taking off the old digitizer
donahkebabnah 6 months ago
@donahkebabnah That does seem a bit odd. I would suggest disassembling and making sure the headphone jack is not damaged and fully connected. Check for damage to the flex cable as well. Making sure it is securely in place may help, but not likely to cause the issue.
RepairsUniverse 6 months ago
Great, now put it back to gether
GamrXX 6 months ago
@GamrXX Follow the video in reverse and you should not have any issues. The Touch 3rd normally a quick disassembly and reassembly.
RepairsUniverse 6 months ago
I have my brothers ipod touch (4gen) and my ipod touch (3gen) And my brother cracked his screen and my just like, died. My question is, can you replace a 4th generation Ipod Touch screen with an Ipod Touch 3rd generation screen?
4512376 6 months ago
@4512376 No, sadly the screens are quite a bit different and not compatible with different generations.
RepairsUniverse 6 months ago
THANK YOU SOOOOO MUCH I did it and it worked perfectly only thing is the date changed (no big deal) why???
dagreateli 6 months ago
@dagreateli No problem, glad the video helped! I would re-sync it with iTunes and it should automatically change back the date, or manually set.
RepairsUniverse 6 months ago
My iPod touch works , but the screen is kind of too bright, and white-ish but still transparent, and sometimes there are many horozontal lines that appear and disappears, and it will blink to normal for a second then go back to this white-ish screen. And if u look closely, u can see tiny lines vertically and horizontally that look like they're quivering. What can I do?
candyapple1766 7 months ago
@candyapple1766 I would check the LCD screen flex cable. Make sure it is fully connected into the connector. If the connections seems good, I would suggest replacing the LCD screen.
RepairsUniverse 7 months ago
Hi buddy, great video. My sisters daughter has managed to get a piece of plastic from her bling bling case inside headphone jack socket so the jack will not go in fully, I can see the offending piece of plastic inside the socket, is it easy to get to after the front has been removed? Cheers for any help.
borry2008 7 months ago
@borry2008 Thank you! Yes the headphone jack is very accessible. Following this guide should gain you access. Sometimes it is too difficult to remove these foreign objects, making replacing them the best option. We have replacements available at RepairsUniverse (dot) com.
RepairsUniverse 7 months ago
@RepairsUniverse Thanks buddy. I am interested but am UK based.
To be honest got the front off but have made a real mess of it, the headphone part needs replacing, the strip that connects the screen snapped and the housing also will need replacing, been a bit of a disaster. Can you help with these parts? Trouble is being UK based and you being in the USA it will take you some time for the parts to arrive.
borry2008 7 months ago
@borry2008 Wow, quite the mess! Of course we can help you out, I suggest using the "contact us" page, located in the top right corner of the RepairsUniverse (dot) com homepage. Our sales staff will walk you through everything you need. As for the international shipping, we usually get packages to the UK in a week, so not too long of a wait time. Shoot us an email and we'll help get your iPod working again!
RepairsUniverse 7 months ago
@RepairsUniverse Will do many thanks!!
borry2008 7 months ago
@borry2008 Not a problem!
RepairsUniverse 7 months ago
`LOL my ipod was so broken the screen just came off and now it doesnt work to slide to unlock
isaac12239 7 months ago
@isaac12239 Wow, sounds pretty smashed up. Likely damaged the touch screen digitizer flex cable.
RepairsUniverse 7 months ago
Oh wow, this is slightly intimidating. I've replaced iPod video batteries before, but this seems a little more touchy. I got a free 3rd gen iTouch from my friend, with a broken LCD/digitizer. Looks like I'm going to take a bit of a gamble on replacing it....
GibsonSGKing 7 months ago
@GibsonSGKing The iPod Touch's may seem intimidating, but really its quite simple, you shouldn't have too much of an issue with the repair. Just follow the video carefully! Good luck!
RepairsUniverse 7 months ago
do you have a video of how to remove a broken earphone jack in an itouch?
fifaplayer10 7 months ago
@fifaplayer10 Yes we do, check out our channel and you'll find a headphone jack replacement video on the iPod Touch 4th Gen.
RepairsUniverse 7 months ago
could with is fix my white screen issue? *note* i have tryed resoring and restarting it*
JST1324 8 months ago
@JST1324 It is possible, if the LCD screen is faulty or has some sort of issue connecting to the motherboard. Check some of the forums out for info on white screens, there are quite a few ways of diagnosing the issues. Good luck!
RepairsUniverse 8 months ago
Can I only replace the glass screen cause mine has cracks or do I have to do that
liljjbo17 8 months ago
@liljjbo17 You can replace the glass touch screen digitizer. We have another video showing that repair and we also have the replacement screens available at RepairsUniverse (dot) com.
RepairsUniverse 8 months ago
I only need the tool lol. Can I improvise and make one or will it break my Ipod?
mattisproff4 8 months ago
@mattisproff4 You can try using a small flat head, but scratches are inevitable. Using our plastic safe open pry tools are the best option to make sure you don't damage your screen or housing. They are available at RepairsUniverse (dot) com.
RepairsUniverse 8 months ago
@mattisproff4 i used a mini screwdriver works fine
kingjester74lol 8 months ago
Comment removed
mattisproff4 8 months ago
I have some scrap stuck under the protection screen of my Ipod Touch. I have treated it very well for over a year, it has no scratches and I always have a protection skin on it but somehow dirt from my pocket managed to slip under the glass and it is really disturbing me. Will removing the protection screen like on this video let me clean the inner LCD screen? Where can you get that tool from?
mattisproff4 8 months ago
@mattisproff4 Yes, disassembling your iPod should give you access to that irritating dirt in your screen. You can find all the tools used in the video at RepairsUniverse (dot) com.
RepairsUniverse 8 months ago
Umm i have a question what happens if u come across a stripped screw while in the process of taking the LCD out
FrEsHtOdEaTh1997 8 months ago
@FrEsHtOdEaTh1997 You can look up ways to remove stripped screws, we rarely run across the issue however. Luckily these screw are not overly strong so there should be no issue removing it if you find a decent guide. Good luck!
RepairsUniverse 8 months ago
Where can I buy a repair kit and do the prying tools come with them?
ejls1997 8 months ago
@ejls1997 You can find replacement parts for your iPod Touch 3rd gen at RepairsUniverse (dot) com. All of our screens include a safe open pry tool free of charge. Other tools are available as well on the website.
RepairsUniverse 8 months ago
Im not real sure whats wrong with my ipod touch 3rd gen but, I can use it but i cant see it i cant brighten it anymore, What's Wrong?
71Racin 8 months ago
@71Racin Could be an issue with the LCD screen. Might open it up and check for connection issues, if now, replacing the LCD screen may be the way to go. You can find screen replacements at RepairsUniverse (dot) com.
RepairsUniverse 8 months ago
This has been flagged as spam show
can you please make a video about how to replace the housing(the metal back cover) please every step of it from the taking apart to the putting back together. also are the screws identical or do i have to remember which screw went where.
TheNsoulja 8 months ago
can you please make a video about how to replace the housing(the metal back cover) please every step of it from the taking apart to the putting back together. also are the screws identical or do i have to remember which screw went where.
TheNsoulja 8 months ago
my ipod screen is broke like it turns on and every thing but when u touch it it just stays the same msg back asap if u no how to fix :D
Tubby7thst 9 months ago
@Tubby7thst Your touch screen is broken. You will need a replacement touch screen digitizer to fix this issue. We have these replacement parts at RepairsUniverse (dot) com
RepairsUniverse 9 months ago
My ipod touch screen has pretty much been shattered. The ipod still picks up finger movement in certain places. If i remove the glass screen and keep it off, would it be fully functional again?
XshadowXkilla90X 9 months ago
@XshadowXkilla90X You will need a replacement touch screen digitizer. This will replace the cracked glass and the touch screen at the same time. You can find this part @ RepairsUniverse (dot) com
RepairsUniverse 9 months ago
@RepairsUniverse Thanks for your help :)
XshadowXkilla90X 9 months ago
@XshadowXkilla90X No problem.
RepairsUniverse 9 months ago
@XshadowXkilla90X No You Just Need Another Digitizer Like Me.
Blade23ification 8 months ago
what can i do if two of the seven screws don't come out?
LiLFJ77 9 months ago
@LiLFJ77 Make sure you use the correct size screwdriver. We have these at RepairsUniverse (dot) com
RepairsUniverse 9 months ago
and yes, my computer still detects the ipod
5huffl3k1ng 9 months ago
i need help with this, as far as i know ive done everything right but when i turn on the lcd all i get is a blank screen but the backlight is working just no picture
5huffl3k1ng 9 months ago
thank you, just got my new lcd screen thanks to repairsuniverse :)
5huffl3k1ng 10 months ago
question all i want to do is replace the glass screen why would i need to change the lcd screen if that is not faulty?
TFKTE 10 months ago
@TFKTE Just replace the glass then. Don;t replace the LCD if you don't need too :) This is the LCD video. We have a video showing the touch screen replacement. You can find this at RepairsUniverse (dot) com
RepairsUniverse 10 months ago
@RepairsUniverse yea i realised that as oon as i watched to the end, silly me, but thanks any way
TFKTE 10 months ago
@TFKTE No problem
RepairsUniverse 10 months ago
@FamousNationDomo We recommend the safe open pry tools so not to cause damage to your iPod.
You can find these at RepairsUniverse (dot) com
RepairsUniverse 10 months ago
Thank you so much i thought i would have to buy a brand new ipod
Highninja13 10 months ago
@Highninja13 No problem. Glad we could help!
RepairsUniverse 10 months ago
@KnowWhat1Hate Dude im not complaining, i asked for help and nothing else and obviously i did look it up hence I watched this video. Save your ignorant comments for your butt buddies on Xbox live.
CAINUSROCKS1 10 months ago
When replacing my LCD due to the backlight going because it went through the washing machine, it all went well and the backlight started working again. However, later on it stopped working again. Is this an issue with the LCD or something else?
mattslater14 11 months ago