Part 1: T6Config Tutorial for RC Airplanes NOT Helicopters t6 config planes

[Geovamar]

Hi friend can I use this transmiter for fly simulator as phoenix with the adaptor of ebay...

[UKrocketeer]

Can you do elevon mixing with this?

[theleetbeagle]

@UKrocketeer Yes.

[Hobby331]

My TX works fine with simulators but it won't work with the T6config. I only see Port 2 there. Any suggestions would be great, thanks in advance.

[theleetbeagle]

@salouselvis They're supposed to say NULL down at the bottom of the screen under Switch Program. To make them work you need to set mixes. Source will equal VR A or B and the Destination is whatever channel/servo you want to control. And if you want to bind it to one of the switches, too (acting as a kill switch), select Switch to whichever one you want. Otherwise, I think set it to ON. You'll figure it out.

[salouselvis]

@theleetbeagle

Ha!! I'm an old goat!I figured it out about 5 minutes after I posted...which I did after 2 hours trying:D Thanks for your very kind and informed reply..and so PROMPTLY!!

[theleetbeagle]

@salouselvis No problem. You have me re-reviewing my video and adding annotations now that I'm much more experienced in the hobby. Good luck. PS: No need to remove your comments, they could've helped others. :-)

[oldtoys1961]

Thanks. Got it right the first time.

[pdmdragon]

Having problem installing drivers what was the .com again has it changed

[rafanhoo]

hi,i have this transmiter..my usb program cable stoped working...i got this cable hobby partz.com/ek2-0900a.html..i cant make this cable work...do u have any idea what is wrong?

thanks

[theleetbeagle]

@rafanhoo Does it still (did it ever) light up when you plugged it in? You've been using it successfully in the past? You've switched the com port in T6Config, etc? Your batteries aren't dead in your TX? You've tried it on a separate computer? You've tried a different USB port?

[audiolofft]

Hi leet,

Many thanks. It worked! I also went to hobbypartz cust support and re-installed drivers and stuff.

Regards,

audiolofft (Alan)

[audiolofft]

Thanks. I'm not good at installing drivers, but after hours, I got it installed. (I use Windows Vista) When I go to the com port, it says "Com3. But when I bring up T6 config, I get the boxes, but all the channels are green and my stick movement does nothing. Like you, I have a HawkSky (old analog tx and rx; lost a channel, but hobbypartz didn't have replacement analog, so I ordered FlySky CT6B). When I did the bind, all was well but two servos were backward, so I went to the T6config. Help!

[theleetbeagle]

@audiolofft All I can say is plug the cable into the TX and the USB port, with the TX on. Then load T6Config, then go to Setting inside T6 and select each com port til you get some stick movement.

[MrAlexandros99]

can you send the file that you have in this video

[theleetbeagle]

@MrAlexandros99 Which file? The T6Config program or a sample plane file? Either way, I'll need your email address..

[MrAlexandros99]

when i connect the tx to pc in the t6config it doesn't move nothing

[calmvik11]

How can I restore the settings to factory default?

[theleetbeagle]

@calmvik11 I don't think there is one necessarily. You can just fiddle with settings until it works for your plane. For simplicity, you can set all mixes to OFF, which gives a basic setup.

[calmvik11]

@theleetbeagle The problem is that the 5th & the 6th Channels are not working, rest are. I tried mixing channels but, that is when the 5th & 6th channel stopped working. I have have set all mixes to OFF but still I can't restore those channels. That's why I thought of setting it back to factory default, but nothing is happening.

[theleetbeagle]

@calmvik11 Check our the bottom four boxes in T6, for the VR and the switches. See if they can be set to ON or something else specific. Failing that, set simple mixes for the knobs. SOURCE ch5 DEST vrA, SOURCE ch6 DEST vrB

[theleetbeagle]

@calmvik11 I can send you one of my working T6 files for one of my simpler planes and you can go from there. Send me your email address in a Youtube Message.

[madnesscombat5]

are you able to use this transmitter with a simulator?

[greyfox]

can you upload factory configuration sava file ?

[andyjabben]

when i download the config and driver for the cable it wont open, is there a file i need to put it in

[andyjabben]

@andyjabben

Nevermind i figured it out, wasnt thinking

[RocketBurn11]

I think you have rudder and aileron backwards. Unless you are using mode 2/1.

[theleetbeagle]

@RocketBurn11 Hi. Yeah, I purposely have them reversed on the RX.

[malden86]

Thanks for the tutorial, It helped a lot. Now if I could just figure out how to program the retracts into switch B, I'd be a happy camper.

[nawdog187]

oh just wondering , im sick of spending 60 dollars for a rec for my dx7 got to many helis and planes to control lol

[nawdog187]

make one for helis :)

[theleetbeagle]

@nawdog187 LOL, nah. There are plenty of heli tutorials already.

[nawdog187]

you cant config for helis ?

[theleetbeagle]

@nawdog187 If you're asking if T6Config can, yes it can. Most, if not all, of the tutorials on YouTube for T6Config deal with configuring it for helicopters. I wanted to create a tutorial for airplane-only pilots.

If you're asking if *I* can, then no, I can't, because I don't fly helicopters (aside from 3ch coax toys).

[airplane1glider]

can u tell me were i can get the software

[theleetbeagle]

@airplane1glider Links are posted in the Description and in the video itself.

[TheComputerok]

very clear and easy programing for the t6 for airplanes note helicopters : ) , thanks