AIRSOFT | WE HK416 GBBR First Impressions

[ArminTheWise]

The problem with the shooting was that you shot it in a cold day. Gas gets messed up below 10C.

[LoneriderReviews]

I really need help with this gun, I discovered the outer barrel on this gun came off (by accident) so I could put on a suppressor about 2 months ago, but I was not interest at the time. Now that I want to, I tried to simply twist it off on the side I was sure the threads went, but found that completely impossible.Assuming it was a mistake, I tried the other side with little force just like the last.I used all my strength the next attempt on both sides but still nothing.Which is the correct side?

[fuzzboi77]

I am really too lazy to read through all the posts so if someone already posted this, bare with me. Anyways, how do you adjust the hop up on one of these things? I can't find that info anywhere. I can't refer to the manual because the thing is still shipping...

[narudbzparody]

@SuperFastHD I bought this gun from uncompany as well, theres a little switch you press on the MAGAZINE , right next to the feed that turns on the bolt catch

[TheJedi270]

The mag was set to dry fire. Flip the swith forward and it will lock back

[KipAirsoft]

it's so funny how easy it is to rip the tape off of the trademarks. everyone at customs must be retarded

[LoneriderReviews]

Important question, do any parts on the gun wobble or wiggle?

[RAmboDUnA]

wHAt DId iT cOSt ?

and how many shots are there in one magazine, im not very good in english ;D

[groundpounder247]

charge the weapon to put it on safe. dont leave the charging handle unlocked when you release the bolt, thats a noob move right there.

[vlun121]

have you tried converting this to a open bolt?

[gandhicakes]

@vlun121 I have. It's dead easy...under 10 minutes if you know how to take down a WE 416. Or even an armalite in general.

[Yams313]

So, does the Co2 magazine use the Co2 cartridges?

[SuperBoomstick]

@Yams313 That's pretty much why they call them CO2 mags.

[Yams313]

@SuperBoomstick

Well, there are Co2 magazines that use a Co2 charger thing (much like a green gas canister)... I just wasn't sure which this mag used.

[xGUNandRUNx]

i saw that the person that put this video up also posted pictures of it on a website but on the website it had a silencer does anyone know what silencers are commpattible with this gun please answer a.s.a.p. i want for christmas but also want a silencer for it please answer if you know

[gandhicakes]

@xGUNandRUNx Any silencer that has 14mm CCW threading will work on this. Or you could just get a KAC quick detach copy and it'll slide right over your orginal flash hider and clip on.

[AvPToXic]

is this gun good or bad ??

[cymadeagle]

@AvPToXic

depends. what makes a gun good or bad to you?

[dragontamer50]

i just orderd this gun....when i went to pay i did not ask for my info...it sent an email

[Ckdowain]

Which website is better to order from, UNcompany or EhobbyAsia? Thanks.

[TheDarkSideOfJesus]

is this a reliable and feild ready gun or should i just stay with an aeg?

[Hkairsoft416]

I'm looking to buy this gun and realism is really important to me. On the uncompany website it does not specify if the gun comes with markings or not, I was wondering if that was the same case when you bought yours?

[not12u]

do gas blow back guns need battery yes or no?

[oHaiinexD]

@not12u Wow are you kidding me?

[01NissanSkyline]

Is that a GAS blowback rifle, with a CO2 magazine, or a special CO2 rifle with the included CO2 magazine?

[bed792]

hey SuperFastHD does uncompany ship gas blow backs to the us

[ModuTV]

did you learn how to operate your gun fully? I agree the manuals dont really specify how to actually operate your gun. If you still have questions shoot me a pm :D.

Very nice gun btw

[DrewMC36]

I WANT!!!



[Riffa22]

what rating would you give the gun cos i'm seriously thinking of getting this one :)

[BiGHARYSCOTSMiN]

1 person is an airsoft trolling paintball-er

[njlemke]

@rage639 yeah that's his problem was pissed when mine wouldn't lock

[Rage639]

Hi about the bolt not locking back there should be like a little switch on the top of the magazine which switches between dry fire mode (no locking) and standard (with lock)

[lsufan9999]

Your such a Dink. Typical "know it all" voice.

[micko0007]

The reason it locks bac wen pulled is to adjust de hop up so u don't have to hold it bac

[gandhicakes]

@micko0007 Actually no, the reason it locks back is because this rifle is a Gas Blow Back RIfle. The bolt cycles to chamber each new BB much like a real gun. The reason it locks back on this GBBR is the same reason it does on a real AR type rifle.

[kobster7]

you shure this is a ver 3 cause i thought

the ver3 didnt have the brass tube and a new open bolt system correct me if im wrong?

[gandhicakes]

@kobster7 Version 1,2,3 and 4 all have the brass tube if you're talking about WE's AR/416 line up. You can buy open bolt versions but they will still be the newest model, version 4.

[TheCrossfiregaming]

how many mags would you recommend in a game for that gun? :)

[EREVO45]

i need to buy a black flash hider for mine. Same gun but i need to know how long it is. i dont know how long it is.

[sheepstatuss]

isnt it s.i.r. rails not r.i.s? not really sure

[gandhicakes]

@sheepstatuss SIR is a type of rail designed using the RIS system.

[xx15mini15mobster]

i have the same gun you have but i just got it and dont know anything about it and what i wanted to ask is if a king arms metal reciever would fit the 416

[punyeta101]

can ou not put down your gun everytime you shoot?thats pretty annoying...

[MrMuthaUcker]

what dose anyone thing looks better g36 or hk 416

[beingbanana]

@MrMuthaUcker 416

[ylzt]

a cool man with a good gun

[xSWATxRiFt]

I love this damn gun please tell me where I can get this how much it is and whether or not it would be available in my area reply as soon as possible

[arco19781]

I love it when he says:" By the way the manual was no fuckin help". I know bud haha.

[arco19781]

I love when he says:" By the way the manual was no fuckin help". I know bud haha.

[jrtorres101]

u can get the WE HK416 at airsoft megastore for a cheaper price and it comes with free shipping =]

[beingbanana]

@jrtorres101 ... I just checked... airsoft megastore does not even have the WE HK416

[ylzt]

楼主是抑制不住的兴奋啊，啊哈

[DeadMetalAirsoft]

Can you tell me how you put the black flash hider on the gun

[DeadMetalAirsoft]

the problem with the locking back is a switch on the magazine

[DeadMetalAirsoft]

I swear that looks like an orgasmic gun!!!

[Carbon344]

hey, if your going to DMR with this thing youd better be at about 100 ft. from the target

[ComandnConquerFreak]

You should have gotten the KJW m4 tanio koba

[ComandnConquerFreak]

I wonder what you were like in christmas mornings :p

[DeltaWinters88]

ARE THOSE SHITTY WAL-MART BBS I SEE?!!

[Treembea]

Also, anyone else notice the BB on the table at 2:49? IT'S POSSESSED!

[Treembea]

where did you get it? i couldnt hear you

[krap101]

Do you have a fish tank?

[thatguywithredhair]

the bolt only locks when you set the mags to have it lock. should be a small notch on the top that you can pull back i think if i remember rightly.

[feastluva222]

it doesnt lock back becasue ur mag switch is on dry fire.

[cmpunk1975]

i bought this gun from uncompany also. mine came with a broken charging handle. uncompany sells a wa charging handle.. is it compatable?

[BorderlandAirsoft]

@cmpunk1975 just notify them and im pretty sure they'll send you the part for free.

[TheAustralianben]

hello, how can you draw charger with 1 Co2 sparclette ?

thank

+++

[TheAustralianben]

hello, how can you draw charger with 1 Co2 sparclette ?

thank

+++

[MrMuthaUcker]

whats the range accuracy and power like on this rifle

[SuperFastHD]

@MrMuthaUcker

For me, it's enough, but if you are going to DMR or snipe, its not going to work out.

[limeheadrickey]

@SuperFastHD can it shoot say 200 ft accuratly

[SuperFastHD]

@limeheadrickey

That's debatable, the BBs will reach that distance, but it wil lbe difficult to hit a man sized target.

[ssrc30]

@SuperFastHD I dropped a NPAS system in my buddys 416 and cranked it up and now it works great for sniping. How's it been working for you since you got the issues dealt with?

[BorderlandAirsoft]

is there a way to lower the fps?

[GVMeNProDucTionS]

@BorderlandAirsoft RA tech NPAS system for V2 we GBBR

[BorderlandAirsoft]

@GVMeNProDucTionS k thanks

[ahotpig]

Does this gun come with RIS rails?

[SuperFastHD]

@ahotpig

Yes it has 4 RIS rails.

[iLEGITsNiPeR10]

@SuperFastHD how much did it cost?

[1SH0T2K1LLS]

@SuperFastHD did u paint ur orange tip or did u get a new tip to put on it ?

[1SH0T2K1LLS]

@ahotpig did u paint your orange tip or did it come with a black tip to put on ?

[Liverpoolhardy13]

what flashhider is it ?

and were can i buy it ?

[XlopenX]

hopefully you figured it out by now about the bolt not locking back..

if not, there is actually a special feature on the WE HK416/SCAR/M4 where you can choose if you want the bolt to lock up or not. some other person had the same problem, but when he used other mags, the bolt locks up.

hope that helps~

[SharpShots2]

OMG A FLY !!! SHOOT HIM !! 2:50

[pburgess1]

do you know any decent airsoft companies that ship to the uk

[MudHut67]

Did you ever figure out why? its probably because of the bolt lock tab on the mag.

[420BigT69]

DONT USE CROSMAN BBS

[militiamc]

Wait..

In this video you look like....

a killer

[FriedNugget]

do you think a WA fixed m16a2 stock will fit on this gun?

[DeezeNutsInYoMouf]

When will your full review be done?

[superzero2009]

oh yeah and would it be okay to use green gas mags on it, because i own a we tech scar and if not, where did you find the co2 version on un co.'s website?

[SuperFastHD]

@superzero2009

GG is fine, but its not as crisp as CO2. There should be some on evike and airsoftgi. I've seen them all around the place in the US.

[superzero2009]

did u also put yes for the orange barrel option during the checkout process?

[SuperFastHD]

@superzero2009

Yes I did.

[reazNMedia7]

hello, does it come with a sling mount ? thanks

[SuperFastHD]

@reazNMedia7

Only rear sling mount, none in the front, might have to get an RIS/RAS one.

[CRC1770]

Would you still recommend this gun, even though you've had problems?

[SuperFastHD]

@CRC1770

Yes, it's a very good gun for the price and I think the problems are minor and fixable.

[lifes1ze]

superfast,

i have the same gun. I dont know where the bloody hop up is. Do you?

thanks

[SuperFastHD]

@lifes1ze

Look inside the chamber. Its a little knob that you have to turn. Kinda hard to get to.

[SuperFastHD]

@dragontamer50

It came with it. Gotta love UNCompany.

[SuperFastHD]

@dragontamer50

Yeah, usually they put a fake orange one on and on the side theres a metal black one. Also, it didn't come with BBs.

[airsoft24100011]

bad idea to get co2 because co2 will break your gun into peaces

[HEY8461]

!!! ROF !!!

[FloChris]

dude you make me jealous. I want that guuun ! xD

[nathanwilkening]

usually thiers a switch on hte mag that makes the bolt lock back which can be disabled... its probly just disabled

[SuperFastHD]

@nathanwilkening

Yeah, we are aware of the switch. The problem wasn't the switch, but the mag needed to be broken in.

[porrsmurfen]

Is this gun good with gas?

Does it cooldown fast?

[SuperFastHD]

@porrsmurfen

Cool down with green gas is bad in the gun. CO2 has virtually no cooldown.

[Covertmaddroxx1]

The Mag usualy has a switch on the top just behind the feed, push it down it should the catch should lock, pull it up and it wont, or vice verse

[cooldragon224]

there is a switch on the mag which make the bolt lock back when its emty,u will need to switch it on :))

[TheBlasianNinja]

do you live in the US because im thinking of having them tape over the trademarks and i dont want it to be seized by customs

[SuperFastHD]

@TheBlasianNinja

I do live in the US. I used the Putty over Trademark option to pass through customs. They are very easy to remove and don't leave any residue.

[TheBlasianNinja]

@SuperFastHD so there was no problem with customs and how much did it cost for shipping Thanks

[SuperFastHD]

@TheBlasianNinja

I've ordered almost ten guns from UNC within the last 5 years and never had problems with customs using that option. Make sure to paint the flash hider orange as well too.

[SuperFastHD]

@TheBlasianNinja

Also, it was 64 bucks for FedEx shipping. Took 3 days to get here to NJ from Hong Kong.

[TheBlasianNinja]

@SuperFastHD was shipping that high because its based on where you live in the US or just because it was the US

[SuperFastHD]

@TheBlasianNinja

I personally think that 64$ for 3 day global shipping of a big 10lb box is very reasonable. I would not consider that high at all.

I can tell you that my company's logistics department charges that much for a shipment of a 1 lb FedEx express box.

[cooldragon224]

@SuperFastHD u look like vietnamese lol...r u?

[SuperFastHD]

@cooldragon224

I'm chinese lol.

[drewrules100]

@SuperFastHD how much was this if its over 220 i cant by any way im jappanese

[MAGPULxxDYNAMICS]

Do u know wat the FPS is on that gun? Because on every website that sells this gun they tell u different FPS so i just wanted to make sure

[SuperFastHD]

@MAGPULxxDYNAMICS

I don't have a chrono so I can't tell you for sure. But what I can tell you is that on CO2, it definitely shoots over any field limits for an non-sniper primary weapon.

[therealbenstuhm]

would u suggest uncompany bcuz i was wondering if i should buy from there

[SuperFastHD]

@therealbenstuhm

I would definitely recommend UNC, they are probably one of the top retailers even though they are overseas.

[therealbenstuhm]

@SuperFastHD thanks =]

[Polszenager]

@SuperFastHD

Ehobbyasia also have a good service

[gpensky]

it probably doesnt lock the bolt back because we magazines have a switch on the top so you can dry fire. maybe the switch on the magazine is set on dry fire? i dont know but this is something a lot of people have questions about.

[SuperFastHD]

@gpensky

I was aware of the dry fire mode, but it was not in that setting. The mag just need to be broken in, that's all.

[GeorgeOWashington]

Thanks this gun looks awsome and amazingly cool. Nice job of reviewing it

[GeorgeOWashington]

i know you ordered off UNcompany but how do you know what mag it came with becuase i checked it and it didnt say what mag it came with Co2 or Green Gas. How do you know which one it came with?

[SuperFastHD]

@GeorgeOWashington

I think it comes with the Green Gas mag. I know it did not say, so I assumed that it came with a GG mag at the time of buying, therefore I also ordered a CO2 mag just in case.

[wilXwyane]

would you recommend this gun, i want to get one for shooting around in the backyard (like at cans and targets)

[SuperFastHD]

@wilXwyane

It's a fun gun to play with. If all you do is plink and collect, I recommend it.

[wilXwyane]

@SuperFastHD yeah it would to be cool that have a replica. Im thinking about the m4 version

[JPMotorhead1993]

How much was the shipping?

[SuperFastHD]

64 bucks.

[JPMotorhead1993]

Ok thanks. Much much was the shipping?

[JPMotorhead1993]

Ok thanks. How much did you pay for the shipping and handling?

[JPMotorhead1993]

How did you get this gun with full trademarks? Do you live in the US?

[SuperFastHD]

Yes I live in the US. I was one of the first to order WE HK416s from UNCompany and they said they had Trademarked versions, so I accepted. They seem to be out of those now though ..

[Danph77]

Also how long did it take to ship to you? week?

[SuperFastHD]

It took 3 days to ship + 1 day to process.

[SuperFastHD]

It took 3 days to ship + 1 day to process

[Danph77]

Is it worth getting? You know the KWA M4 GBBR is coming out soon.

[SuperFastHD]

I don't know too much about the KWA M4 GBBR but I am pretty satisfied with the WE, especially its externals. Depends on how much the KWA is. For 280 + 60 shipping, the WE is a bit more expensive when you factor in mags, but I think its worth it.

[MidgetP0WER1]

were does the battery go?

[SuperFastHD]

These guns are operated by CO2 or propane gas, not batteries like the AEGs.

[Danph77]

Wow nice gun. You live in the USA? UNCompany is out of US I guess? How much did it cost to ship? How many shots can you get off one co2 12g? How accurate is it? You used .25 or .30 in it yet? Thanks :)

[SuperFastHD]

Yeah I'm in the US and UNCompany is located in Hong Kong. It cost me 64 bucks to ship including the weight of a spare mag. I can get around 40-50 shots off a CO2 12 gram depending on how much auto I use. I use either .28g or .30g. I can't give you exactly how accurate it is yet because I haven't tested it, but the range is pretty far.

[MidgetP0WER1]

were does the battery go?

[policecarsrock1]

What do you have UnCompany do besides putty the trademarks so that it doesn't get checked by customs? What do you label it as? A gift? Or maybe a replica?

[SuperFastHD]

They just have an option of covering trademarks with tape or putty. I asked them which one was safer and they said putty was easier to get through customs. So I used that option ever since.

[sushiboy805]

2:53 a bb trying to run a way ahah

[FatCheesyMan34]

WE airsoft is the only company that gives their GBBR rifles to U.S SOLDIERS for training, like an actual training excersise so i dont give a shit about VFC and they also make it better by asking their opinions im just saying

[NallePu83]

VFC is making a new HK416. A GBB rifle

[gbbrifles4life]

This is not worth waiting for. I accidentally dropped my WE M4 and the rifle broke into two parts...

The materials they use to make the body and internal parts are of inferior quality. I own a KWA and CA AEG M4 and they both have been abused and dropped, and guess what? They are still in one piece and STILL WORK.

Unfortunately this break on its own over time, and you will NOT find parts for replacement when this happens. I hope you like seeing the word OUT-OF-STOCK everywhere.

[TehLilAzn47]

Ohh... thanks for replying, many mention that it is recommended you use propane to help the gun reach its breaking point, did you have any problems with CO2 and you don't regret getting CO2 only? And do you still have problems with the pin and mag?

[SuperFastHD]

No problem. I don't regret getting CO2 at all, but you can also use green gas/propane mags along with the gun. I seem to have no more problems with the pin and mag, you can check out my latest video on this gun in my channel, I go over these other things in that video.

[TehLilAzn47]

How do you adjust the hop-up? Was it accurate after you adjusted it? And did you find out why the bolt didn't lock back?

[SuperFastHD]

The hop-up is adjusted through the ejection port. It's actually kind of hard to reach unless you have small fingers or nails, neither of which I have. It's been snowing lately in the Northeast alot so I haven't had a chance to go out and test the accuracy of the gun at longer ranges. About the bolt locking back, I think you just have to break in the magazine. After about 10 mags now, the gun is locking back about 80% of the time.