i have this gun but mines not leaking from the fittings or the macro line but the bolt assembly area. the air shoots out of the bolt alen key slot. please someone respond!
@halofreak703 me and my friend have the g4 and he had the same problem so he took the bolt out and cleaned ever thing form the bolt to the back cap and the inside of where the barell srewes in so good luck and hope i can help =) ow and sorry about the wording
I just got a g4 and was wondering if its normal that right when i air it up the gun doesnt shoot for the first few shots. Like the first 2 trigger pulls i hear a small noise from the air and then on the third pull a paintball just rolled out of the barrel. but then on the 4th pull it shot fine. Is that normal? i'm guessing it just takes a few shots to air up but I was just wonderin. thx
my regulator fitting leaks too.. but it seems impossible to unscrew it because i cant get a grip on the regulator while turning the fitting counter clockwise to unscrew it... how did you get to losen up the fitting on your gun? please reply :)
@yourmouse1 One problem might be the lube, because DP's stock loob isnt thin enough to creat a tight seal around the bolt and orings, so the air can leak through.
try putting so Hater Sauce, or Planet Eclipse gun oil on the bolt. :)
what macroline do i get?
aisoftking 16 hours ago
@4rn3m4nn please reply .
at ansgear which macroline fitting do i choose 90degree fitting or 90 degree swivel fitting?
azndancergman 1 month ago
@azndancergman
ansgear.com/90_Degree_Macroline_Fitting_Swivel_p/macrofitting90swivel.htm
4rn3m4nn 1 month ago
For 300 doolars a tipman has less problems
dansterwerecool 1 month ago
i have this gun but mines not leaking from the fittings or the macro line but the bolt assembly area. the air shoots out of the bolt alen key slot. please someone respond!
halofreak703 2 months ago
@halofreak703 all u have to do is lube ur bolt.. take it out clean and just re apply the lube on it and it should work
icorey17i 5 days ago
@halofreak703 me and my friend have the g4 and he had the same problem so he took the bolt out and cleaned ever thing form the bolt to the back cap and the inside of where the barell srewes in so good luck and hope i can help =) ow and sorry about the wording
SuperBobsnake 19 hours ago
This has been flagged as spam show
I just got a g4 and was wondering if its normal that right when i air it up the gun doesnt shoot for the first few shots. Like the first 2 trigger pulls i hear a small noise from the air and then on the third pull a paintball just rolled out of the barrel. but then on the 4th pull it shot fine. Is that normal? i'm guessing it just takes a few shots to air up but I was just wonderin. thx
shanesboard 2 months ago
Ive had so many probs w/ my g4
im not impressed yet. .
drummerguy283 2 months ago
my regulator fitting leaks too.. but it seems impossible to unscrew it because i cant get a grip on the regulator while turning the fitting counter clockwise to unscrew it... how did you get to losen up the fitting on your gun? please reply :)
MegaA009 5 months ago
@MegaA009 Dude, i had the same problem, Two adults had to help me with real tools!
Its seems impossible, but its not :)
Keep trying ;D
4rn3m4nn 5 months ago
So you just order some new fitting and macro line?
WaSaB1x 6 months ago
So you need to fittings or just one 90 degree fitting?
Matix109 6 months ago
@Matix109 You should buy two :)
4rn3m4nn 6 months ago
Thanks man!
Noobscape179 6 months ago
Where did you purchase the new fittings? Please Help
NuXusHD 7 months ago
@NuXusHD At ANSGEAR.com
If you want to I can send you a link, pm me
4rn3m4nn 7 months ago
@4rn3m4nn would you mind posting the link
fungut1channel 2 months ago
My guns leaking from the bolt The marcer line is fine but When i turn on the ASA the gun leaks from where the bolt is wtf do i do!
yourmouse1 11 months ago
@yourmouse1 Have you tried to change the inside O - rings ?
4rn3m4nn 11 months ago
@4rn3m4nn No i dont even know how to take the gun apart to change the o -rings
yourmouse1 11 months ago
@yourmouse1 i had the same problem and replacing the o rings fixed it
xXfReeStyLeSk8RXx 11 months ago
@xXfReeStyLeSk8RXx What O - Rings ?
4rn3m4nn 10 months ago
@4rn3m4nn the farthest back one on the inside of the gun
xXfReeStyLeSk8RXx 10 months ago
@4rn3m4nn the oring on the back cap ans lube them to
TheArthurpb 8 months ago
@yourmouse1 One problem might be the lube, because DP's stock loob isnt thin enough to creat a tight seal around the bolt and orings, so the air can leak through.
try putting so Hater Sauce, or Planet Eclipse gun oil on the bolt. :)
ReachTheHollow 10 months ago
@ReachTheHollow Yeah, thats a good advice!
4rn3m4nn 10 months ago
Sweet video, br0
Stuntfux 11 months ago
thx man !
4rn3m4nn 11 months ago
thanks
robinwagle 11 months ago
Thanks, also when you shot your g4 out of box, did your trigger get stuck every once and a while?
TechPaintballpb 11 months ago 2
@TechPaintballpb Yes it did, but it stopped when I adjusted the trigger :)
4rn3m4nn 11 months ago
Nice video! This helped me alot! ^^ Thank you
NeverListenToAdults 11 months ago