My 3rd handmade longboard

[20verybadthings]

is it possible to also put fiberglass between the layers of plywood?

[17angeldew7]

What type of wood did u used?

[mexibrick6321]

great longboards they really have that professional quality to them. keep it up

[bubenil]

i was wondering if you could tell us how you made the concave on that board, what method did you use? thanks

[WereProfessionals]

hey guys i started making longboard but can any1 tell me how 2 put in a concave??????

[EricksonSB]

Go to my channel For a REALLY Good deal on my Arbor axis Bamboo Longboard.

[Hoser1358]

how much does it cost to make your own longboard? bet it would save a lot of money

[yjsdeed]

do u add fiber glass to bottom or top please answer someone

[Hoser1358]

@yjsdeed you put it on the bottom, but some decks have it on both, same goes for carbon i believe.

[MrFreeskier88]

quick question- after you lay the fiberglass and let it cure, how do you cut off the excess and make the edges look really neat and clean? thanks!

[tBgJaCk970]

two words: crazy concave

[No4al]

I want to build one my self same shape but where i get stuck is it necesary to putt fiberglass on it and where do you putt the fiberglass above or below and do you know how many mm thick i need to get the wood im 60/65 kg and how long does the board need to be srry for my bad english

[Slokey3]

what wood did you use and how many layers was it?

[mitchellJBridges101]

@Slokey3: or do you mean plys

[dan20i1]

what wood

[IDIOTSTICK101]

what is your fibergalss called, cause in alberta i can only find marine sheets which is like strings of fiberglass? and where do u ge it?

[tiqiqi6]

U lost 3 Kg nice job! ;)

[clamituwawa]

did u laminate it yourself?

[Symingtonclan]

hey did u buy the board concave did u pre order it or do it ur self

[kookieN1nj4]

PLEASE RESPOND! where did you get your wood?

[manster245]

About how much was it all togeather not including the trucks and wheels

[longboarding1230]

how do you make it have drop?

[boomboxer100]

Dude, a handmade Rayne Vendetta!

I love it man!!=D

[BillysAutomotive]

Hey what tools would you need to make these?

[physcoMatt]

can you plleeasse tell me what size trucks to use for a drop through board like this.. im stumped

[iamtheraven2011]

where do you get the fiberglass sheets?

[inferno2080]

Hey if I burned a design onto the bottom of the deck then fiberglassed it, do you think I'd still see the design? (Does the fiberglass finish clear?)

[madclown7373]

i wish i could make a board like yours

[reinohh]

@madclown7373 it's really not that hard... just plan it well and do it with enough time.

[MrHECTIC98]

@reinohh how did u get the concave

[therealcrazeemon]

What are your dimensions for the nose?

[reinohh]

@therealcrazeemon

yo, well don't go wider than 11cm to prevent the wheel bite and leave enough space for trucks to turn fully... start the cutout like 5cm from the innerhole and go somewhere like 7-8cm (from innerhole). It's easy to measure if you take the bushings of from your trucks, leave the kingpin on and turn the truck with wheels on...

[ConcreteRippers123]

what is the yellow stuff that you put on the fiber glass ?

[reinohh]

@ConcreteRippers123

actually there's no yellow stuff, that's just wood shining trough the fiber glass. but what I pore on there is polyester resin... could use epoxy resin....

[robeur94]

if u wanna get the board stronger use a cupple of layers off fiber glas on the top asswel!!

otherwise looks sweet!!

[TylerOsso]

@reinohh

how many plys of birch did u use and how thick did it end up, thanks

[reinohh]

@TylerOsso it was 3 x 4mm veneer... one piece included 3layers so it's 9-ply and two layers of fiber glass, final product is like 1,5cm nice and stiff.

[ZombieTronFTW]

this looks really good :)

[MrDutchboydan]

Shit, I was just at home depot and didn't check!! Thanks

[fireballrox]

im making a 5 footer and puting fiberglass on it sucks. i hope it doesnt break when im done

[MrDutchboydan]

Where did you get the fiberglass sheets and resin from?

[fireballrox]

@MrDutchboydan home depot or lowes carries it near the dry wall putty

[brandondavisdecae]

it kinda looks like a skinnier version of the rayne vendetta, do you use to it to freeride?

[coolpianoplaying]

hi,  i have a question. i have a mindless maverick longboard, but I'm not really happy with the deck. do you think that i can ''cut'' another deck out of it??

[SSTmT]

sick bro love your work

[TheNuclearFist]

hey man im tryin to start somewhere with my shop it would be great if you could contact me my email is leondro.mendoza@yahoo.com thanks alot

[zornthebean]

How much did this board cost to make?

[pankistoi082]

i liked what u did with this so i decided to make my own. tell me what you think.

[TheAlastairr]

Those the Sabre 190's?

[BigBudGrow]

can you pretty please make a vid of how you make the shape of it like what you you how you made it like how you made that stencil

[akaHaz]

how much does it cost (materials) to make all of this?

[altoawsomness]

how did you press it 

[KR1Nk]

@altoawsomness He didn't , he used a full piece of plywood instead of single veneers

[EnjoiEmerica11]

Hey man do a review on the sabres!!

[lie190az]

you lost pounds! :) in your second handmade longboard video your were 95 kg jumping! :P

[reinohh]

@lie190az yeah :D when i started LB i was 110kg :D now when i shred like a lunatic every day i'm something over 90kg... its a sport with passion!

[mitchellJBridges101]

@reinohh: its not just a sport of passion, it`s just the way to live

[KennyMccormikx69x]

How thick is your board? And how many plies do you have ?

[midnightcobra1111]

how long is it?

[reinohh]

@midnightcobra1111 110cm

[GhostLongboards]

@reinohh how many layers is it and whats it made of?

[froeseje]

what were you using on the fiberglass like what were you applying with the brush?

[FakanBaka]

how did you get the bend throughout the board before you cutted it?

[pyro6957]

@FakanBaka hmmmm cutted good engrish ge places like twoby4s on either side puts a brick in the center and clamps

[tony8999]

make me one :D, im too lazy im buying a board for summer 2010

[rengawtm]

how thick is it

[themccannman]

gonna crack right behind the trucks, the wheel coutouts are gradual enough

[reinohh]

@themccannman you so cool. this board has taken so bad beating and is still stiff as fck. done some hippie jumps, underflips and early grap hammers and nothing to worry about.

[themccannman]

@reinohh probably because of the 2 layers of fiberglass, without that it would have cracked a long time ago, btw thats not very stiff if it's flexing that much under human weight, so no, it's not "stiff as fck"

[GlueStickMedia]

@themccannman sorry dude but the wheels cut outs are fine most dh decks have cutouts that are a 90 degree angle, pluse it strong wood and used 2 layers of fiberglass, he is good to goo

[smokey3322]

if you were to draw a graphic on the bottom, would you draw it on the wood before you put the glass fiber sheets?

[xphil45]

nice one mate

[jfrasher77]

You get wheel bite?

[nickonack]

how did you press the board loooks nice i wanna make one

[degada666]

this would be a dope freeride deck, how much concave?

[03prinz]

what are some stuff u use? all i know u use birch but how thick is the birch for each plywood and how many plywood did u use? does it work without the class fiber?

[Robzf1234]

AWSOME SEEL SUM MAKE DAT MONEY

[illbesnowboarding555]

nice looks sick. you should try making a board with rocker like the comet fsm or the new landyachtz board. that would be a cool project

[Twentyfitythrid]

you should sell them online. make a website

[reinohh]

@Twentyfitythrid make love not money ;)

[colinprprpr]

@reinohh maybe other people want your boards u selfish person!!!

[syntse]

Talvella onkin hyvää aikaa väsäillä niin on keväällä vehkeet valmiina.

[reinohh]

@syntse

ainut vaan et pitäs lämmittää pajaa hulluna. tarviis aina semmosia ~24h liiman kuivattelu jaksoja :(