Reset Glitch Hack Tutorial Part 1 : Fat 360 (CMOD prep PT1)

[haimaidutenpulamea]

I have a question guys, I have a Jasper motherboard but how I know how much mb I have on it ?

Thanks!

[loveing561]

Where would i buy this chip and does it come with its own wires

[Manuell110]

Obviously I mustn't do this if i directly buy a board like matrix or coolrunner, do I?

[lXlNismo11lXl]

The video length says it all.

[thagrtstuvawltyme11]

Im getting my 360 RGHed and will get it back in a few days. Time to say good bye to those damn dual layers. Getting the 360 fitted with a 1tb 2.5" drive that fits inside the original HDD case for the 360. This is gonna make for a nice Christmas indeed....

[ChemiculsHD]

damn, jtaging is much easier

[Kyle247l]

1337 Because this is the best hack and easyer then the Jtag soldering points - eventhough I screwed up an Xbox360 slim, and a fat, I;m detirmined to try this again - third time on another xbox360 falcon...

[SteezyJerksEnt]

vid ends @ 1337!

[dartz315]

Hey bro, Where did you get your cpld from?

the sites i see have rediculous shipping =/

[pearlmax]

If you ask me, modding an Xbox (especially hard modding) is more fun than actually playing the same old games they spew out every year.

[dartz315]

@pearlmax My first attempt at jtagging i failed bad. $180 down the drain.

Got another xbox, and jtagged it. Did it just to prove i could. Screw the games. I make money from the consoles!

[Storke10]

how much cost it all for the glich hack ?

[iTzJoJoBang]

How long does it take to boot with the ebay cmod?

[EliteSiege1082]

this is prolly a dumb question...is there anyway to do a reset glitch hack (RGH) without having to buy all this extra stuff? reason is ive already bought soooo much stuff and have had ZERO sucess lol...also ive noticed someone said you can do it with just an XD memory card or usb? is this true? thanks

[Trololololoish]

@EliteSiege1082 No you must solder. Maybe you should learn what your doing first before you buy shit.

[EliteSiege1082]

@Trololololoish actually i already did solder and already do know what i am doing as far as jtagging goes bro. However i am unlucky that my xbox is not jtagable unless i do the reset timing glitch, aka timeing attack

[Trololololoish]

@EliteSiege1082 Yeah, everything down to the length of the wiring can affect the timing glitch.

[EliteSiege1082]

@Trololololoish yes ive heard the shorter the wire the better off you are.

[TheThomasfrom1995]

@Trololololoish Seeing as Electrical current passes through wire at just under the speed of light = (299 792 458 m / s) Then I would highly doubt that the length of the wire would affect the "mod". Unless you where a few hundred meters away...

[Trololololoish]

@TheThomasfrom1995 The added wire length adds distortion and noise to the reset glitch impulses the CPU gets causing the glitch to not work.

[Blitz9287]

anyone else notice the end time of the video is leet ;)

[cjchillin2k8]

13:37



[DayLight95]

I am not planning on doing this hack any time soon but I have a 360 that I would like to hack so I can get the DVD key back. Do you recommend I buy a board before they get pulled from ebay?

[DeViLzzz2006]

I feel so stupid watching these videos. I am not sure I could ever do this.

[TheChickenrun3]

so which mobo rev. is this for?

[jcplinux2008]

@TheChickenrun3 It is for all fat Xbox 360 motherboards, If you can figure it out from watching the videos you can do a Slim from reading the manula on the hack itself.

[TheChickenrun3]

@jcplinux2008 well seeing that there are several motherboard revisions in the fat consoles i did not wish to waste my time watching a video that may not even refer to the console i own therefore i did not continue watching it. i could do this from watching the video but i prefer to use the written instructions for the wiring and the videos to know better of how to do the soldering

[TheChickenrun3]

@jcplinux2008 though of course now that i know that it will work for all consoles i am glad that you have posted a good video of the process

[Xanderj89]

@jcplinux2008

Well, all but Xenon.

[LuckyDukeSeven]

@Xanderj89

Are you sure that there's no way to do this to a Xenon console?

[Xanderj89]

@LuckyDukeSeven

Xenon's don't have a HANA, which is required. It was attempted through the ANA, but the cpu wouldn't slow down enough for the glitch to work.

[LuckyDukeSeven]

@Xanderj89

As of yesterday, There's apparently a company that does do xenon's. Either that, or they gutted my system, replaced all the components, and left a modified shell and power-plug that were both the same as my older ones...

I just wanted to learn how to do Xenon's on my own. But it doesn't look it's at least apparently possible.

[LuckyDukeSeven]

@jcplinux2008

"all fat Xbox 360 motherboards.."

I have a Xenon console. It's been back to microsoft, so it might be opus. Either way, I've heard that the RGH doesn't work on Xenons. Is that true? 

[groteraad]

@jcplinux2008 Let me correct that. It is NOT for all xboxes. It is for all xboxes EXCEPT the Xenon boards!

[intheshitter]

You should buy some blu tac (not sure what Americans call it) its super handy when soldering stuff together. I plan to glitch a slim soon. I JTAG'd a console once. It worked for over 30 minutes and then I got e79 error :(

[iguanabrad]

Can this work for falcon boards?

[guppy7s]

@iguanabrad yeah it's been updated to work with them :)

[Inf3rnoG35]

guys, search c-mod on ebay. Buy the kit if you don't have a USB SPI programmer and the JTAG cable. For the JTAG cable, you need a LPT aka Printer port on your PC

[HPKWI]

hi there do u have a link on ware u got the cmd for xbox 360 fat as i have a fat thanks

[JAWS1376]

hey man just wanted to say thank for the vids!!

[TheTooRealistic]

I wonder if he tried to make the video end at 1337.

[bigbaseballs1125]

lmao. 13:37

[ricopicouk]

Worked for me, first time!,

Thanks for your efforts.

[jonathanb95]

Do you have this one Glitch Board Pro kit - Xilinx CoolRunner II CPLD XC2C64A module aka C-Mod (HKE) from ebay from a Chinese dealer? i am trying to figure out how to make mine to run but it won't boot xell, great vids btw

[K4cK7788]

Thanks alot for this nice tutorial.

How much Watt is your solderingiron?

[TechGamer1337]

Could you post a link to where you bought the items?