Remember to ALWAYS reburnish your heatsinks if you clean off the old paste. Take 1000 grit sandpaper from the autostore, and sand the heatsink aread that contacts the paste. Then polish this area with a metal polish safe for Aluminum or copper, we use MAAS. Then clean again with 90%+ rubbing or denatured alcohol. THEN apply your new paste.
DO NOT burnish the cpu or other chips, just clean very well with the alcohol.
Dear sir, I replaced the thermal grease and blew the dust out of the fans on the Xbox 360 and the fans spun faster, but the fans are back to normal. Do you recommend everyone to place his/her Xbox 360 in front of a regular room fan (at least 6 inches high) to cool down the system's heat sinks so that the thermal grease can stay intact and to control the fan speed? And I'm guessing the GPU is the small processor that's above the Processor on the left side? Great tutorial.
Us version of xbox 360 slim sucks it overheats! but the xbox 360 asian version rocks cause from the morning until midnight it's still working playing best graphics gears of war 2 and halo reach so buy the asian version it last long and better.
This does fix the red ring of death but partially, if u want to fix it completely u hve to take out the nub xclamps... Go and search Xclamp fix on how to do it!! Thumbs up if tis helped u!!!
i did this today and believe or not. my shit is actually working now. i still dont get why dont they put the fan against the cpu heatsink and gpu to cool it down. the fan is not cooling it down at all. i cut the fan in half and put it against the heatsink to get it air flow. right.
just to let you guys know... i did this to my xbox and when it finally died out microsoft wont repair it cuz you have tampered with the xbox... so just think about it, wait 1 month to get your xbox back fixed or play with the thermal paste and wait for it to die and not get it fixed at all
I have actually done this because my warranty ran out, due to the poor quality of thermal paste my xbox only lasted a 1-2 months. I am going to dust off my old xbox and maybe try Artic silver 5 or Mx-2 and see if it improves the life of the console.
My xbox got the RROD today. Its only 8 months old . I got a E71 error message and 1 red ring on the bottom right side. Would doing what you did in the video fix my xbox after my warranty is up?? After I downloaded the update today and turned my console off and later back on it did this, why? It seems a little fishy.
wow tisk tisk tisk they could have atleast put copper heat sinks for the chips ...and for how muhc people buy xbox for isnt fair for the quality of work that they put into it =)
if noone else nos this my 360 just today got the three rings fuck microsoft im not paying 150 dollars for a fix so all you have to do is apply this to all the heat sinks encluding the two little bandades in the back then resemble but first do the towel trick to get it back to normal lets face it we can fix this cant we i mean come on all it is is a heat absorber
When it comes to thermal paste, you should always buy the best, preferably with silver in it (hence the price).
If you look on Ebay, tigerdirect ect, you can pick up some arctic silver for as little as $7... If you aren't gonna buy the good stuff, there's no point doing this because you wont see an improvement over the current thermal paste on there.
I'd say something like Arctic silver 5, Antec Formula 5 or even some Zalman thermal grease... It doesn't really matter so long as you splash out on one of the better names.
ah yes i mod xboxs alot, better heatsinks and such higgher airflow all that jazz but this would be one of the most effective ways
robthatguyx 2 months ago
Remember to ALWAYS reburnish your heatsinks if you clean off the old paste. Take 1000 grit sandpaper from the autostore, and sand the heatsink aread that contacts the paste. Then polish this area with a metal polish safe for Aluminum or copper, we use MAAS. Then clean again with 90%+ rubbing or denatured alcohol. THEN apply your new paste.
DO NOT burnish the cpu or other chips, just clean very well with the alcohol.
pchcsheridan 2 months ago
Dear sir, I replaced the thermal grease and blew the dust out of the fans on the Xbox 360 and the fans spun faster, but the fans are back to normal. Do you recommend everyone to place his/her Xbox 360 in front of a regular room fan (at least 6 inches high) to cool down the system's heat sinks so that the thermal grease can stay intact and to control the fan speed? And I'm guessing the GPU is the small processor that's above the Processor on the left side? Great tutorial.
WinVistaUser2 7 months ago
Hey can any one help me please !
I bought a thermal compound ZP-360
and it looks different from other thermal paste that i bought one month ago
is this ZP-360 safe to my xbox ?
please Help
thank you :))
nicolaiaquilina 1 year ago
i can't seem to get off the x-clamps...
CrazySourcePlayer 1 year ago
Us version of xbox 360 slim sucks it overheats! but the xbox 360 asian version rocks cause from the morning until midnight it's still working playing best graphics gears of war 2 and halo reach so buy the asian version it last long and better.
sesestro 1 year ago
This does fix the red ring of death but partially, if u want to fix it completely u hve to take out the nub xclamps... Go and search Xclamp fix on how to do it!! Thumbs up if tis helped u!!!
RaVzdepoop 1 year ago
it´s really good to change the thermal paste cause microsoft just use some shit paste! ----> use Arctic Silver 5 !!!!
Kevinkoch2443 1 year ago
Thats some real effort you put into those videos.
Circumventorable 1 year ago
will this fix red ring of death??please help me my 360 has 3 ring of death
jja2k8 1 year ago
will this fix red ring of death??
jja2k8 1 year ago
@Roy13161
Doesnt matter anymore, oh well
I have to send mine in, so i get a new one anyways
Crazyman677 1 year ago
What do I do if it only does it with one game?
Crazyman677 1 year ago
@Crazyman677
try looking up how to fix scratched CDs. the toothpaste trick DOES work
Roy13161 1 year ago
Check out my videos for a permanent fix!
Logoseum 1 year ago
This has been flagged as spam show
wow! cool video!
24nomatter 2 years ago
that is too much themal paste u drown the chip
mattisledge 2 years ago
would this make the xbox perform better??
MrMadPlayer 2 years ago
i did this today and believe or not. my shit is actually working now. i still dont get why dont they put the fan against the cpu heatsink and gpu to cool it down. the fan is not cooling it down at all. i cut the fan in half and put it against the heatsink to get it air flow. right.
albertobebes 2 years ago
it causes air bubbles
comicfreak11 2 years ago
just to let you guys know... i did this to my xbox and when it finally died out microsoft wont repair it cuz you have tampered with the xbox... so just think about it, wait 1 month to get your xbox back fixed or play with the thermal paste and wait for it to die and not get it fixed at all
xStonyTiger 2 years ago
they dont fix them anymore anyway..
wra7h 2 years ago
I have actually done this because my warranty ran out, due to the poor quality of thermal paste my xbox only lasted a 1-2 months. I am going to dust off my old xbox and maybe try Artic silver 5 or Mx-2 and see if it improves the life of the console.
urbandisaster567 2 years ago
is there some kind of super expensive 50 dollar thermal paste that will keep my xbox cold no matter how much i stress it out?
i'm willing to spend up to 100 dollars on keeping it working.
supermanizgay 2 years ago
Just call the xbox helpdesk before fucking up your system so you cant send it back
glennzoo 2 years ago
too late, i removed the warranty sticker about a month ago.
also, if i spray grey paint over the power button will it look bad? because i never use it anyway. i just use the controller for everything.
supermanizgay 2 years ago
Why would you remove the sticker?
glennzoo 2 years ago
i needed to remove the sticker to take the plastic plating off the 360.
im not stupid enough to just set the entire console down and start spraying it like that do you?
supermanizgay 2 years ago
The best kind of Thermal Paste is AS5 (Arctic Silver 5) and only costs 5 dollars on Newegg, or from your local radioshack.
DaedalusXNA 2 years ago
thats 10 dollars here
hartless2000 2 years ago
My console shuts off like after 5 minutes then goes to the two rings. Would applying thermal paste solve this problem?
Halo2Crap 2 years ago
Yes definetly. But buy some good quality thermal paste like Mx-2. If you buy the cheap thermal grease then you xbox wont last very long.
urbandisaster567 2 years ago
where did u get the thermal paste?
FreedomF63 2 years ago
you can get good thermal paste (arctic silver) from amazon for very cheap
Grapezz1 2 years ago
Is it difficult to remove the headsinks?
(Sorry for my bad english)
Wurzelzwerg1212 2 years ago
do i want it to dry or just put it together?
RedTeamSniper 2 years ago
I can't seem to find where to get the akasa heat spreaders for the other chips. I checked on ebay, but they weren't there.
leo161978 2 years ago
you want to look for "Akasa VGA RAM Sink"... The model i have is the Akasa AK-VMC01-BK
bassdemon16 2 years ago
My xbox got the RROD today. Its only 8 months old . I got a E71 error message and 1 red ring on the bottom right side. Would doing what you did in the video fix my xbox after my warranty is up?? After I downloaded the update today and turned my console off and later back on it did this, why? It seems a little fishy.
fretzombie 2 years ago
thanks for sharing, ive subscribed, appreciate the clear info
TristanPhoenix 2 years ago
wow tisk tisk tisk they could have atleast put copper heat sinks for the chips ...and for how muhc people buy xbox for isnt fair for the quality of work that they put into it =)
15killa16 2 years ago
i got red rings doing this. error code is 0102. how do i get rid of it.
scottycd 2 years ago
Idoit hes lettin here
Phosphocol 2 years ago
if noone else nos this my 360 just today got the three rings fuck microsoft im not paying 150 dollars for a fix so all you have to do is apply this to all the heat sinks encluding the two little bandades in the back then resemble but first do the towel trick to get it back to normal lets face it we can fix this cant we i mean come on all it is is a heat absorber
super65man 3 years ago
and i also heard that peanut butter and tooth paste can be used as thermal conpound?
if so wich one would be better cous honestly im not really planing on puting toothpaste on my 360's gpu lol
but if it works DO tell me!
immortalassassin117 3 years ago
When it comes to thermal paste, you should always buy the best, preferably with silver in it (hence the price).
If you look on Ebay, tigerdirect ect, you can pick up some arctic silver for as little as $7... If you aren't gonna buy the good stuff, there's no point doing this because you wont see an improvement over the current thermal paste on there.
bassdemon16 3 years ago
i know how much they cost and witch one to get but thats not what i asked....
immortalassassin117 3 years ago
Simple answer, don't put anything but proper thermal paste on it.
bassdemon16 3 years ago
lmao tooth paste. u try it first
b0ryczk0 3 years ago
damn i cant get any thermal paste...........
does silicon work it might be a while till i get some good thermal paste. some dude told me silicon works....
immortalassassin117 3 years ago
i got it all ready and now all i need is some paste whats the best?
jerodirwin66 3 years ago
I'd say something like Arctic silver 5, Antec Formula 5 or even some Zalman thermal grease... It doesn't really matter so long as you splash out on one of the better names.
bassdemon16 3 years ago
alright thanks alot
jerodirwin66 3 years ago
very nice, very nice.
; ]
lukekitchel 3 years ago
nice
speir12 3 years ago
awesome
ccfcfan1987 3 years ago