How to build a 21 plate 8X8 dry cell

[vidfuse]

what type of metal are you using?

[rushman819]

fuck i like this song.. :)

[locsphere]

There are some things that confuse me about this design, I was hoping you could message me about the answers. Which plates do + and - go on Why does the gas go back into the water and then to a percolator and then to engine? Can I just add this with out a modification chip. I have a 2011 Frontier and it has certain censors. Where would the mod chip go if I need it?

[magna59]

You must be on the right track.....you've got one of the best B side tracks from the period.....if your choice of music is this good, it cannot do anything but work,but rush at it or you not be able to see the wood for the trees. Regards.

[juanfranalomartes]

What do you want so many cells if only there are 3+ and 2+ for?

[Itsmeeman1]

@adam3141 Thank you for the reply.  Most informative. Real question is... is it worth fitting one of these systems to my car? Have you?

[adam3141]

@Itsmeeman1 I have never tried it, although that stems from my fear of blowing the car up as my car already runs on gas although I might one day build a system just to see what it does.

As far as I can work out, the gases are fed into the air line of the car and in giving you a bit more power. There is one question though and that is where are you getting the power to run the hydrogen cell. The answer would be the alternator but there is one problem

[adam3141]

@Itsmeeman1 That problem is the more current you consume from the alternator, the harder the engine has to work to turn it. (Turn the axle of a DC motor with the leads shorted and you will know what I mean).

Now in my mind, if it takes 600W of electrical energy to produce the Hydrogen and Oxygen gas then you get less than 600W (say 550W) of explosive energy due to inefficient electrolysis.

[adam3141]

@Itsmeeman1 Of this 550W, you will get an extra 110W of power - but wait a minute - it takes more than 600W of mechanical energy (say 630W) to generate the 600W of electrical energy.

So we have used 630W of mechanical energy to generate an extra 110W of power. Our net power loss will be 520W.

This is the skeptical view I take, but I am open to an alternative, rational explanation.

To answer your question, don't buy one - build one and see for yourself, but don't expect it to work well.

[MrRuzo214]

What type of gasket are you using?

[hyfusiondotcom]

I see your videos are in an area I'm working in. I made

contact with you because I'd like to give you some money

for placing my link in your video description.

Call me to discuss it if you are interested 949-945-5417.

[Zundwig]

is that enough to run a car completely on what you made in this video?

[Itsmeeman1]

What's with the neutral plates? What benefit do they give? Cooling?

[adam3141]

@Itsmeeman1 The problem is, electrolysis is an inefficient process. Say I run a cell at 14V from the alternator of the car and the cell resistance is 0.5ohms. I will draw 28A from the alternator. The power being dissipated by cell is 392W (wasted power)

Hydrogen production is proportional to current and happens at around 2.1V. If I were to generate the same hydrogen, I would need to decrease the cell resistance to 0.075ohms. The waste power now is 58.8W.

[adam3141]

@Itsmeeman1 The neutral plates as far as I can work out are put in there to divide the voltage up to try and reduce the inefficiency by multiplying the effective hydrogen output as the current through the cell remains the same.

[altairdesouza]

Kijk, het gas verlaat de cel door het gat in de boven-of onderkant.

[imatelly]

wandering if u can explain more on how the water runs through it do u only put watter on the outsides,are the plats in the middle nutral,are there holes that aloue this,im very good with electrolysis,but i cant for the life of me figure out how this dry cell works and would like to

[totalybitchn]

ok mim not seeing whats happening with the water ?/////??????????? all i see is 2 valves on the side with h comeing out of them some one please help me

[luiscosta1992]

where do i connect the + and the -

[ttward2]

+nnnn-nnnn+nnnn-nnnn+ N = neutral

[jawbraeka]

@ttward2 try -nnnn+nnnn-nnnn+nnnn- instead.. see how that goes for you.

[nobrizzle]

great song...do you know what your lpm output is?

[ttward2]

Depending on the amps 4 to 6 liters min

[ASHMIR91]

im sad because hard to find the part here...

[mmm9mmm9]

I was digging the music so much I couldnt concentrate on the video

[Willbyron75]

Warning Hexavalent chromium

[SXiStylezz]

hexavalent chromium, so what? just by living in certain parts of california you have already overdosed on it.

[HHO4ALL]

I can't believe I missed this video when you put it out. That is awesome!

I wish my cells came out looking half as professional as yours do.

Good stuff!

[huntsleepfishoutdoor]

Thanks for the nice comment. After several months of testing I need to take them apart and do a good cleaning.

[sirHOAX]

Nice build. Great craftsmanship..

[delvis11]

i love your hose setup. looks real cool. i stumbled upon your channel. i like your vodeos. good job!

[jdcmusicman]

That's a real nice looking cell man ..

[ttward2]

Thanks

[tjgame2]

Nice real nice.

[ttward2]

Thanks

[NOBOX7]

where did you get those hose fittings

thats some nice work bro