Added: 4 years ago
From: Truthbeeknown
Views: 11,115
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (21)

Sign In or Sign Up now to post a comment!
  • how do you wrap you coils, parallel or twisted?

  • F-16 Pulse King & Magikgas Pulse King on ebay by a guy named magikgas will do the same thing and more. I bought one and it revived my battery that needed to be replaced.

  • Comment removed

  • Quit spamming with the pulse king crap. Pathetic.

  • dead lead acid batteries are usually sulphated due to open circuit self discharge

    Sulphation is a hard deposit on the plate surface and prevents the plates accepting charge.

    It can be broken down by applying a high voltage at low current or a long period.

    Try 20V 100mA using limiting resistor

    Once broken down the battery can be charged normally

    Total recovery is not possible as some capacity will be lost

    Prevent sulphation by charging every 2-3 months for a few days using a normal charger.

  • gorgeous.

  • Nice. I have completed my motor and it has revived one battery already. Going to start doing some tweaking to see if I can achieve over unity but even if I don't I am still happy that I can revive dead batteries, that alone is totally cool.

  • Could you post a paragraph or two for the layman about what is going on here?

  • what happens if you run the motor in a vacuum?

  • Can one over charge with the Bendini circuit? Like how do you know when to take it off?

    Thanks

  • Yes. Good question. I would imagine to watch the charge voltage. Then let the battery settle and test it with a small load and watch how fast or slow the battery looses voltage and then recovers when the load is taken off.. I haven't experimented too much with charging batteries from it, so I'm not the most qualified to answer. I may do more with it in the future.

  • I have been doing this for months... I have found the best thing is to put the old battery on the charger and let it stay on for days, till it reaches 13 or 14 V. I have now revived about 4 batteries this method. But be sure there is water in the cells!

  • Hi, I´m curious if the bateries charged in this way can drive a AC 120V concerter that runs a TV for exanmple? Can you prove that?I saw "energy from the vacum" but cant deduce the time for one battery full charge, bedinni uses huge capacitors to turn on 10 bulbs.

    I find a great similar generator called muller GEN at overunity . ifrance . com /

  • Why not...I think its posible to. I am now get my first motor in work, and now start to make better one. My dream is power all house by this motor. BUT! You need werry big batterys and werry big coils, and the wheel. But if it will make all house voltages up, then I will be impresed.

  • And in theory you can charge 6 batterys using only 1 battery for charge those 6! Overunity! And just add batterys more and more, power will be given more!

    If use in primary battery 2 batterys (24V) and put charging 10 batterys (120V) so here you have now that 120V ! Not so easy, but why not?

  • The time of charge vs drain, how much time takes 10 batteries charging?

    The coils are crucial 4 this devices and find that the geometry of the coil acelerate the electrons like a vortex(see the rodin coil).

    HP and naudin probes this coil that works like an electromagnetic ventury.

    tks 4 sharing!!

  • I have charget only for 1 battery 4 batteries! And time is same!

  • Nice vid. One question, are you using ferrite mags or neos in this demo.

  • Thanks. They're just ferrite.

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more