So your inside handle wount be use anymore? And the only way to open the doors is with the poppers remote, right?? If you loose your remote or your celinoide fails your fuked? Nice work man love what youve done to your truck
You do it the same way, just hook up the door popper on the inside door handle lever and unhook the door locks from the latch because you won't need them with shaved handles. Also make sure the door popper unlatches the door latch before you shut the door. Here is a liitle trick i use- take a screw driver and push it into the latch long side, then hit the door popper and see if it releases the latch. You can do this before you actually close the Door. Hope that helps.
The window plate has approximately 16 bolts that are 1/4 socket the window is connected to the window plate. Remove the 16 bolts then slide down the window and remove the panel. Hope that helps.
how do you remove the window plate covering? Do you have to burn it off with a welder? I just tried this a second ago and after I took off the door panel I couldn't remove the window plate covering.
@shammaster21 That might be true man.. I do remember messing with that and tighten it one time! I will loosen it just a bit and hope that helps... Thanks!! I appreciate the help man!
That might be true man.. I do remember messing with that and tighten it one time! I will loosen it just a bit and hope that helps... Thanks!! I appreciate the help man!
If u don't mind me asking,, my question is do you know any possible reason for my doors to pop open while driving.. It's like I'm on the freeway and suddenly one of my doors pops open by itself without even pressing the button in my remote.. I'm trying to figure out what the problem is.. Thanks
@PabloMillan09 sounds like the cable from the latch to the popper is to tight so when ur driving the bouncing around is opening ur door...hope that helps
one is glad to be of service!
ScottysDetailing 2 weeks ago
thank you very much the vidio was ver helpful
TheMusicismydrug42 2 weeks ago
thank you!
ScottysDetailing 3 weeks ago
This video you guys have made is very educational. Now i can do my trucks poppers. Thank you. Shoot, who needs school??? Haha.
Mobbintha559 4 weeks ago
So your inside handle wount be use anymore? And the only way to open the doors is with the poppers remote, right?? If you loose your remote or your celinoide fails your fuked? Nice work man love what youve done to your truck
esebrown187 1 month ago
thanks scotty,great work.
barhoom1 2 months ago
You do it the same way, just hook up the door popper on the inside door handle lever and unhook the door locks from the latch because you won't need them with shaved handles. Also make sure the door popper unlatches the door latch before you shut the door. Here is a liitle trick i use- take a screw driver and push it into the latch long side, then hit the door popper and see if it releases the latch. You can do this before you actually close the Door. Hope that helps.
ScottysDetailing 3 months ago
How would you do this to a 98 four door tahoe? on the rear doors of course. any info would be app
reciated.
AlexJasso100 3 months ago
The bigger the better. Anything above 45 Pds will work.
ScottysDetailing 3 months ago
Great video. I plan on doing this to my 81 C-10. How pound pull motor will I need to put in? I see a lot of ppl use 60 lbs test.
noahwatson84 3 months ago
great video great help !!!
barnaby688 5 months ago
The window plate has approximately 16 bolts that are 1/4 socket the window is connected to the window plate. Remove the 16 bolts then slide down the window and remove the panel. Hope that helps.
ScottysDetailing 7 months ago
how do you remove the window plate covering? Do you have to burn it off with a welder? I just tried this a second ago and after I took off the door panel I couldn't remove the window plate covering.
Btw, I like the music.
f927gheno 7 months ago
I will make a video soon on how to set up door popper switches I'n the doors and a ER button also a ripe cord mounted I'n the grill.
ScottysDetailing 8 months ago
@12andomized that has happened to me before and I opened up my hood from the latch with a flathead screwdriver..LOL Then I replaced the battery..
PabloMillan09 9 months ago
Awesome video !!!
amerishaw 9 months ago
How do you get in your truck when the battery dies?
l2andomized 9 months ago
@shammaster21 That might be true man.. I do remember messing with that and tighten it one time! I will loosen it just a bit and hope that helps... Thanks!! I appreciate the help man!
PabloMillan09 9 months ago
That might be true man.. I do remember messing with that and tighten it one time! I will loosen it just a bit and hope that helps... Thanks!! I appreciate the help man!
PabloMillan09 9 months ago
dyamat is a great insolator will also help with water damage to soleniods.
ScottysDetailing 10 months ago
Great Tutorial Scotty! Could you make another giving some tips on how to insulate or things that can be done to protect the solenoids.....
glumpkin2008 10 months ago
Good stuff man, Thanks.
dankehoe1 11 months ago
If u don't mind me asking,, my question is do you know any possible reason for my doors to pop open while driving.. It's like I'm on the freeway and suddenly one of my doors pops open by itself without even pressing the button in my remote.. I'm trying to figure out what the problem is.. Thanks
PabloMillan09 11 months ago
@PabloMillan09 sounds like the cable from the latch to the popper is to tight so when ur driving the bouncing around is opening ur door...hope that helps
shammaster21 9 months ago
You bet! There are no good bids on how to do solenoids. Do thought I should make one.
ScottysDetailing 11 months ago
Exactly what I needed to see. Thanks man!!!
jacksmobilephone 11 months ago
Finally good instructional video on youtube, good job keep it up
NicolasOrtega40 1 year ago
spal door poppers online.
ScottysDetailing 1 year ago
where did u get that kit at if u dont mind me askin
TheSugabear210 1 year ago