Three more "?" please : ). At half stroke for both pistons, What is the percentage of air volume between the pistons, including the regenerator, to the air volume in the 2 pistons combined? I believe that will answer about 5 more questions I have. Also do the pistons have rings or polished surfaces? And do you oil the pistons on the alfa type?
@colasito11 Wonderfully put! Thank you so much. This is the info I have been looking for , for 6 months or more. I now believe it is time to try. judging by the diameter of the pistons and the full travel of stroke that I gathered by the cranks, it seems like the pistons travel a length just shorter than the width.
May the tool fairy drop a load of tools in your driveway.
Hello friend, I think my small experience, the same size for the alpha type is the most powerful type ganma the easier to do, although the type beta with a can of preserved and the globe is also very simple, LTD , RINBOW LAMINAR AND I HAVE NO EXPERIENCE.
So long video, but it gives too little information...
Sameman0 3 months ago
it sounds like a big block at idle
laxguitar50 11 months ago
@laxguitar50 lol it sure does
dproffessa 10 months ago
suuuper!
piespokladowy 1 year ago
now get about a couple hundred more of these put them 2 by 2 going behind each other and we got ourselves a train!
561inurface 1 year ago
Great job,
Do the pistons go all the way to the top or what percentage of the stroke is cut short of full travel?
MUDDy
muddymuddymuddmann 1 year ago
@muddymuddymuddmann Hello friend
the pistons go up as much as possible up to remove dead space
should avoid making physical contact
colasito11 1 year ago
@colasito11 Thanks for the response.
Three more "?" please : ). At half stroke for both pistons, What is the percentage of air volume between the pistons, including the regenerator, to the air volume in the 2 pistons combined? I believe that will answer about 5 more questions I have. Also do the pistons have rings or polished surfaces? And do you oil the pistons on the alfa type?
Thanks bunches!!!
MUDDy
muddymuddymuddmann 1 year ago
@muddymuddymuddmann Hello again:
half of the race, the two cylinders added a volume equal to the displacement of both, since they were eliminated dead space.
this must be added the interior volume of the tube connecting the cylinders.
The pistons do not wear rings, and mounting them put a little light oil.. Greetings.
colasito11 1 year ago
@colasito11 Wonderfully put! Thank you so much. This is the info I have been looking for , for 6 months or more. I now believe it is time to try. judging by the diameter of the pistons and the full travel of stroke that I gathered by the cranks, it seems like the pistons travel a length just shorter than the width.
May the tool fairy drop a load of tools in your driveway.
MUDDy
muddymuddymuddmann 1 year ago
@muddymuddymuddmann You are right friend, 21 mm diameter piston 13-mm stroke Regards
colasito11 1 year ago
@muddymuddymuddmann You didn't type with all caps this time!!
yellowmetalcyborg 1 year ago
@yellowmetalcyborg OOOPS! I MUST HAVE BEEN ON MY WIFE'S COMPUTER.
NICE SCREEN. SHE JUST PLAYS GAMES ON IT UNTIL TAX SEASON.
MUDDy
muddymuddymuddmann 1 year ago
tighten up that wobbly flywheel
DNM35 2 years ago
how many watts(electrical) can it provide?
OVAT131174 2 years ago
Nice...
It sounds powerfull!!!
babilonico29 2 years ago
Very good....just improve it with a watercooled cold cylinder and make a regenerator, then you have the power.
robinhooodvsyou 2 years ago
What is the best stirling type? Alpha, Betta, Gama, Delta(LTD) or laminar?
fernandesilyt 2 years ago
Hello friend, I think my small experience, the same size for the alpha type is the most powerful type ganma the easier to do, although the type beta with a can of preserved and the globe is also very simple, LTD , RINBOW LAMINAR AND I HAVE NO EXPERIENCE.
Greetings
colasito11 2 years ago
great work !
best regards
SWINGREGORY 2 years ago