Video review of Terminator Salvation; T-R.I.P.

[spudnick160]

if you think about it, the resistance cant kill of this version of terminators. cause if the prototype is lost, the t-800 wont be made and cant protect john conner

[HEAVYxPredatorR]

T-600 is the best one well if i was a Terminator.........ill keep dreaming.

[johnwx777]

Well, T-RIP's face looks like he's just seen T-1000.

But it's a fairly decent figure for the size.

[devastatorXblackoutX]

in terms of size i thought the t-600s were bigger than the t-800s in the movie

[AustinAkens1]

@devastatorXblackoutX

T-600's are bigger in size. They also have rubber skin, that's how Kyle said resistance fighters spotted them easily.

[MegaCRuffy]

Your moms a t-600 Thumbs up if you thaught that was funny :)

[darkchoco212]

dude......you're lucky to get all this......nice review, by the way

[Wolfykinsfromroblox]

that robot looks weak and verry small

[DSRvmv111]

love your video

[ANTIcoFilms]

I have the t 800 in the salvation line (is arnnie the t 800 in the first 3?) its just like this but no wires over his sholders, and head, rist and ancke have have no articluation.

and I have john connor

[gen3zigen]

hehehe

what the robotsssss



[gen3zigen]

hehehe



[MrFreefonix]

i baught this and i live in england and i tryed it and the head and the elbow doesnt move

[GESSO217]

I can Tell you this one doesn't have a head joint. You can bend it but it doesn't have a Swivel just flexable plastic. I have to agree with you on the face. It looks terrible, And why have the mouth opened? When in any Terminator film have you seen the skinless terminator walking around with its mouth hanging open? Never. So why do a figure like that?

[DrShaym]

"All to well," that's bad grammar. It should be "all too well."

[Mold30]

The scale is not screwed up, the t600 was one of the first terminators standing at 8 feet tall!

[ALIENWarriorX]

Apparently the T-600 is suppposed to be 8 feet tall, while the T-700 is supposed to be closer to 7 feet tall. The T-800 is supposed to be 6 foot something, about Arnie's height. That may be slightly reflected in the toy height differences.  Not sure if the scale is close to exact or not...

[Kaylacrazychik212]

hehe i bought him

[OfficialKrisFowles]

Bought him he was on clearence for 3.73!! =D

[erik2918]

nice video dude!

[starwarsfleet]

i got a t-r.i.p. today at gatti-land and it has light up eyes and a machine gun but its a 12" figure.

[condor6651]

i thougt that terminator in the 1st 3 films (arni) was a T-101

[optibotimus]

@condor6651 the t-101 series are how they look on the outside. Their physical appearance.

[condor6651]

@optibotimus oh that would make sence lol im just a bit confusald i gess :-s lol

[1457Angel]

@condor6651 what u smoking it was the t 800 with arnold

[condor6651]

@1457Angel get a life i know now and i was partly right so what you smokin

[1457Angel]

@condor6651 OMG im soz tht was my bro idk y he commented he prob thought he was on his own sorry

[condor6651]

@1457Angel lolno worrys

[olstar18]

@condor6651 Its t-800 model 101.

[cheddar07]

@condor6651 T800 model 101

[HotToysCollector666]

i dont like them at all

[MegaDoome]

I got this toy for $5 at a Big Lots.

I recommend this awesome terminator!

Great video review, dude!

[darthmaul1525]

My T.R.I.P arm broke How do I fix it were it still has movement?tell me on my chanel please I would really like it thanks.

[egormly]

y-800 1 and 2. 3 is 850

[theprimo100]

iv never seen an obama toy before!

[RadioactiveKetchup]

the t-600 is supposed to be that big cause in real life the t-600 is eight feet tall

[andyKILLSWITCHwagz]

@RadioactiveKetchup

In real lif the the t-600 is a movie character.

[rustedhero888]

1 thing that bothers me, the T-600 i supposed to be 8 feet tall in the movie so how can it be an infiltration unit if it's THAT big!

Not all human is that big!!

[davidakhoa]

I just bought this impulsively at Toys R Us for only $4.99 like an hour ago! I'm glad you said the whole "I do recommend him just not immediately" part because I rather pay 5 bucks for this figure rather than the $10... Good review!!

[ego2d]

1:55 lol, his face!

[hijacker19133]

lol

[GodsGiftSamuel]

do you have a job???

[optibotimus]

I actually own my own business and supply jobs to other people...try a better insult...you look like a moron now

[olstar18]

@optibotimus Tell the truth he looked like a moron before you posted.

[MrDresden6]

@optibotimus nice. right on, man. el-oh-el.

[MarvelReviews117]

@optibotimus lol



[GoldSilverMoneySkull]

@GodsGiftSamuel your really looking like a retard after thar comment.

[GoldSilverMoneySkull]

@GodsGiftSamuel after that comment.

[LandauTST]

Uhhhh........The T-600's were known to be much larger than their follow-up models. They were like giants compared to the newer models. So there's nothing really wrong with the size comparison between the T-600 and T-RIP.

But I agree on the face, it looks like they kind of messed up on the skull/jaw. The jaw is actually way too big.

[terminator239]

in terminator 2

[terminator239]

I belive optibotimus was wrong and the card is to because arnold s said that he was a t-101 not a t-800 or a trip

[KeragHustar]

He was a T-800 model 101. 101st terminator on a conveer.

[terminator239]

Thanks sorry about that so he was a model of a t-800?

[KeragHustar]

Yup. Infact i find this stupid that they made Arnie to be T-850 in Rise of the machines..this doesent fit with a Camerons story at all. Resistanse had a little time to send two T-800 in two dofferent times before they blew up the factory. And blam... they found a T-850 somewhere in there...and like "oh guys lets quickly send this one too". Bulls*it. T-800 was the best option on their hands. Or they could have sent T-850s in all three times. That would be logical.

[KeragHustar]

I mean two times. First was a Kyle Reese.

[LandauTST]

He's a T-800 Model 101.....for some reason in T3 he calls himself a T 101......why I don't know. Either a blooper or he was referring to himself as a Terminator Model 101.

Watch the movies over, and read up on Terminator Wiki

[KeragHustar]

T3 is a complete blooper...man. He couldnt be model 101 because there was only one such model...other T-800 are models 99 100 ... 102 103 104 etc. The problem is that the jack*ss who was writing scenario for T3 totally didnt know what he was writing about. In T3 when Arnie refused to execute his program to kill Connor i allmost flipped in my chair of such stupidity made by an author...

[ImShindo]

why in the review apears some strange sounds ? :-|

[AGENTURIEL09]

THE R.I..P IS THE BEST ONE TO ME

[spideyrockz4ever]

Kyle Reese is John Connor's dad? how? in Terminator Salvation, they show John Connor as being in his thirty's, but Kyle is like in his teen's. how the hell?

[DEADCELLRISING]

Kyle got sent back in time before jon was born and fucked his mum thats how!

[MrDavidVendetta]

Watch the first Terminator !

[spideyrockz4ever]

okay =)

[KeragHustar]

watch the first movie...

[falariem]

Dude, I had THREE of those T-800 ones back in 1991. Those things were awesome.

It looks a lot less detailed than I remember, though.

[killerbumble]

also the t-850 can hold up more to laser guns. there the same as t-800 but with a tougher endoskeleton.

[scientist42696]

in terminator 1 he played as the t r.i.p swartsanigar was the greatest terminater known in hollywood

[nik6069]

hes dead?

[indskab]

oh! yeah............Arnold is the best Terminator ever...........he should be good in this Movie"TERMINATOR 4".......

[666HellKnight]

Why does the T RIP look like he has false teeth?

[TooFastTooGood]

cus it is false teeth

[Jaded92]

ur right, the face looks frikkin weird!

[Cybermrchew]

The T.R.I.P is the T-800 and the T-800 technically was in the film as you saw it being produced in the factory then attacking john Connor and Kyle Reece and then it recreated the famous and brilliant scene from the first movie were the T-800 walks up the metal stairs. I think Marcus was this weird type of hybrid a terminator with organs and thought it was human, look on Google image search, type in terminator salvation models and it will show you what the different terminator models are.

[pacmanlegend]

no, Marcus donated his body to Serena aka cyberdyne systems. They used his heart and brain......the rest of him is shit they made.

[yougotkained]

why does the old man have toys???????

[TheEtqwPro]

T Reast In Peace XD lmfao L O L

[supked1122]

the 1 in t3 was a t 850

[nik6069]

nope Arnie was a t-800 and the girl was a t-x

[supked1122]

i know

[IggyFTW]

Nah, the one in T3 was indeed a T-850 - He said it himself. He does share a lot in common with the T-800 except that the T-850 has two reactor cores.

[nik6069]

ah alright thank you for the correction.

[jojo0017]

i had the old figure and traded it for a ninja turtle one. ha ha...

[MTERM775]

Does anyone know if this is out in New Zealand yet?

[MTERM775]

Is this the 3.75 inch figure??

[thiscynthiachick]

ofcourse the toys are crap! what do you expect? China made them! China! Their toy companies don't care if their action figures stay true to the movie or not! They put their effort in avoiding death amongst American costamers.

[ramabima]

In conclusion, John was fighting the prototype model (T-R.I.P.), before any of T-800 unit in the factory being activated.

While Marcus is a TS-300 Hybrid Model infiltration unit prototype.

[forallmoods]

That explains why Arnold was so damn HUGE in the movie, I was wondering if that was a T-800 or not. Thanks for clarifying that.

[ramabima]

You are very welcome, my friend :)

[ramabima]

T-700 R.I.P/T-R.I.P. did fight John Connor in the factory. T-R.I.P. is a prototype design which was portrayed by Roland (Arnold's cameo) along the movie.

The mass-produced T-800 was not yet launched in the story. And in the end, John had blown the factory up, so the T-800 unit were never existed in the past.

[MTERM775]

it delayed the production of the T-800s. Hopefully we'll see T-800's fighting in the war in the 5th film(if there is a 5th soon).

[KeragHustar]

Well in the end John sayed that this was a big achievement but field of war needed more than that so i assume there are other factorys

And why do you think that it was a T-rip? Its pretty abveous that it was a first models of T-800 because in the beginning when they assaulted small factory one of soldiers noted that everything happens just the way Connor sayed it will be. He was talking about mass production of T-800s and if they will be produced in masses resistance will have a hell of a pain

[ramabima]

I know... But didn't you notice that the mass produced T-800 were not being activated yet?

The one John Connor fighting was the prototype (T-R.I.P.). Prototype itself means the very first imperfect model, as a sample.

I hope that made a clear point.

Peace :)

[KeragHustar]

LoL where did you got that info that it was a T-RIP? And what model was Marcus then?

[KeragHustar]

Ok man i googled it.. T-RIP is just a name made just to make it sound cooler for kids... for an action figure of a T-800 prototype..there is no such thing in the movie. if to be clear... i dont know how meny spider man versions out there called who knows how..but that doesent make spider man called any different... so this is a no go as a fact.

[ramabima]

I agree.. I guess that was only made for the toy's company publication.

[Sandtrooperbsa]

how much would that collectible cost me?

[Cybermrchew]

Because the T.R.I.P didn't fight john Connor in the T-800 factory. John Connor and Marcus fought a T-800. This fact was repeated many times in this film (e.g. when john was talking about the fuel cells).Marcus was a T.R.I.P as he was the perfect infiltration unit, but he looked different to the figure playmates have made. The people at playmates have designed and packaged the figure wrong.

[Cybermrchew]

(This comment is carrying on from the first)

but Marcus looked a bit different from what playmates have called the T.R.I.P. Marcus had visible organs underneath the outside skin, he was quite a bit smaller than the T-800 and he had different types of hands, which made him less powerful, but more human like.

[Cybermrchew]

The t-800 is in terminator salvation. You see a t-800 with what apears to be arnolds face that attacks john connor, you also get to see in the film a whole production line of t-800's and you even hear john connor talk about the t-800's fuels cells, which connor uses to destroy the skynet base. The the terminator resistance infiltrator prototype is the t-800, the people who did the pagaging have just done a crap job. You could call Marcus the T.R.I.P as he was the perfect infiltration unit.

[thesniper321]

no it isn't if people, who made the film and sold right for the toys, tells you the rip fight john in a factory why can't you just get it?

[supked1122]

he learned about the full cells in t3 because the t850 was the same unit buyt stronger

[kevinburnsrules]

id like to see the T-RIP go against the T-800

[kevinburnsrules]

i need to get that line of toys what kind of line of toys is it

[ldl0021]

looks so stupid with its mouth open . . .

[MTERM775]

I know! This toy would be 20 times better if it had a closed mouth like it should be

[Lincoln435]

i have one of those. but i dont know how to get the fucking eyes to light up.

[Hitmanx16]

The "fucking" eyes light up, when you flash light into the weird red circle at the pinpoint of his head... we like to call it: Light-piping...lol

[MrAppleby56]

wtf is that crying sound...

[TKSKS]

guy sounds like spence from king of queens.

Nice review though!

[NewsSeeeker515]

at 3:13 "also comes with a gun... to shoot people with..." LOL the R.I.P. Rested In Peace hitted by the gun then fell backwards LOL! 5 Stars :D

[thesniper321]

dude I read your comment yesterday and I have been laughing the whole day, in the subway, in the bus, at work and now my girlfriend thinks I'm crazy cuz I laugh with no visible reason you made my day with that joke thank you

[NewsSeeeker515]

Your welcome bro lol! :D

[MTERM775]

......also a pipe...... to beat people with"

[movieforfreeeee]

If you want you can watch Terminator Salvation the movie for free here:

MOOVZON[dot]COM/terminator-sal­vation/

[treybennett9750]

i got the same one but it came with t1 card how would i get a T R I P card

[Moviestarscreamrulez]

yrs is just an error

[vorhees6781]

i have to get this figure!its just awesome!

[Moviestarscreamrulez]

this one or the t-700??

[vorhees6781]

this one. you?

[Moviestarscreamrulez]

Plan to get the T-600 (the one with two heads, and a chain gun). I'm not a die-hard fan of the trilogy, so any Terminator figure would do for me :)

[skilo837]

i had a few terminator figures from when t2 came out i wish i had kept that stuff it would probly be worth alot now

[granderson45]

For all of you that are rippin on this guy you can go screw ur mom. if u dnt lik it dnt watch it

[Moviestarscreamrulez]

damn right

[darkchoco212]

can u tell me where did you get this figure, i want it!!!

[Zielin87]

Are You BIG CHILD or what?

Mummy bought You new toy?

[indyfan402]

would you leave this guy alone? who the fuck do you think you are to judge someone by what they like to do? so fucking what if he likes to collect toys? thats something he likes to do so fuck off

[cooliomonkey1234]

his face looks like a monkey's

[JCPSYCHO500]

CORRECTIONS:

Arnold was the T-800 in 1

The T-600 is not the finished model of the T-RIP

The T-RIP is actually the T-800

[RaymonMesken]

No Schwarzenegger was the 101 model in part 1

in part 2 he was the T-800 and also in the 3 part

[indyfan402]

he was a t-850 in t3

[blogsurfer2000]

OK. Now i've seen it all. Toy reviews

[snaglog]

do you still live at your moms house?

[optibotimus]

actually...i own the house my mom lives in, in las vegas...i live on california...so...no i don't live in my moms house lol

[drokan13]

So bassically

The T-RIP is Marcas in the new movie

And towards the end of the film we see the T- 600 which is the finnished model of the T-RIP?

[untruereview]

marcus was a completely unique model. not another one like him. at the very end, we see the T-800, wich is the finished model of the T-RIP

[JCPSYCHO500]

This model is actually the T-800

they just didn't have the rights to use the name

[Darius12235]

um no its T-R.I.P. so why the fuck do you think the same company got the rights for T-600?

[JCPSYCHO500]

the name T-600 hasn't been used before

[drakenkop12345]

Cool ;D

[Untought]

Why was there a baby crying? Uuummmm.....Is the fast forwarding on purpose?lol he fell!!!

[TheJackwho1]

ther the t-600 is much more taller then my john coner toy

[skate4life511]

in the movie isnt the cgi arnold swartsenager(i doubt i spelled that right)a t-800 towards the end of the movie...and further more wat is marcus

[optibotimus]

yes

[Hellraiser618]

i love it that he comes with a lead pipe or something. It just looks like he can beat your ass with it.

[Apjooz]

4:00 make them kiss ooooh sexy robot sex...

[optibotimus]

target

[hilarioph]

I buy it already this toy

[indyfan402]

lol r u yoda?

[thatzombieguy]

The 3 3/4 inch figures have slightly less weird looking heads.

[codebreaker2001]

The size of the T-R.I.P. and the T-600 are correct. From what I recall reading, the T-600 Models are 8 feet tall and is meant to be hulking. From the timeline and the design, Skynet eventually shorts and slim down the later Terminator models as we see with the T-800, T-850 , T-1000 and the T-X. So, the scale of the figures actually reflects how the T-R.I.P. and T-600 is shown in the film. The T-600 is a hulk and the T-R.I.P. is practically a dwarf next to it in the film.

[Ebx123]

wait how come i dont get a card like that?

[GN522Chinami]

I like the figure

It is fairly detailed,not bad enough

Uh,what is the named of the song used in the intro?

[jrem360]

in t-3 was arnold t-850?or 800

[west93]

T-850..he killed john connor before he was reprogrammed to be sent back to protect him in T3

[mcgriz]

what size is he

[optibotimus]

6 inch range

[kmpelkey0010]

That is the beauty of a prototype. It is not susposed to be the best. This figure is done great. It is made to look like a prototype. The T 800 is the finished model of this particular peice. Yes the thing looks wrong and that is the reason it is a prototype and not a replica. This figure is awsome.

[marcisneros]

Did they make a toy of the endoskeleton Arnold becomes in this film, and also was the model that scars John at the end that same one that Arnold was?

[west93]

well if u seen the movie u should kno..that is the same T-800..the model 101 skin was burnt off

[101ScottyBoy101]

so this is the machine that arnold swartswhatever played?

[optibotimus]

no...arnold was the T-800 and T-850....in the salvations movie..he hadn't been fully created yet

[drokan13]

Wasn't arnold the T-600 in the first Terminator?

[chriskindle]

No, he was T-800

[BannamaI]

i thought it was T-Modle 101?

[west93]

T-800 Model 101....Model101 is the Arnold skin

[gregman7273]

his face does look stiff or stupid but great review

[gregman7273]

how much are these figures

[optibotimus]

9.99..depending on where you buy em...but around that price

[randy7027]

TranCendenZ you are soo right and NECA above all makes the best figures like the avp;r ones are very well done. if they would have manufactured these they would make soooo much. and how much was this? and what do u guys mean T-1000 and T-800 do u have a box tell meee?!!? lol

[staypuftlova]

dude the t 600 is made to be bigger than the t 700 800 and the rip

[TranCendenZ]

optibotimus: You need to state the manufacturers of the Terminator figures when you review and compare them.

NECA and McFarlane make the best detailed figures.

[optibotimus]

i thought i had mentioned playmates makes these

[staypuftlova]

dude get the 3 and a half inch versions there awsome and they go good with figures like the x men guys and gi joes

[Obomah]

This figure looks alright but it's not as articulated as I'd like. the t-600 is what I'm aiming for.

[Avernious]

Wait it said T-1000 and T-800 which is it...

Anyone who knows get back to me on what Terminator is which..

[optibotimus]

where did you see T-1000?/

[Avernious]

On the back of the box. A quick Wikipedia search said that Arnolds model was a T-800 model 101.

The Cop from T2 was a T-1000.

According to Wikipedia that is.

[optibotimus]

i dont' remember what the box said lol but yea the cop was the T-1000...not arnolds model

[Avernious]

Yeah apparently any Terminator that looks like Arnold is a model 101. But is frame is a T-800 or T-850.

Yeah the box said T-1000 and T-800. So I just paused for a second like "Wait what?"

Didn't make sense to be talking about a bunch of different ones. Ya know? lol

[AMKALOS21]

i got that figure

the movies worth watching i saw it last night

[Bomb1525]

arrgh!! aii nieed moure aigrhe!!!