just duct tape the rods back together and put a little duct tape over the hole in the block and wipe up all that oil and wring it back into the engine and crank er up no problem we feex
na man all wrong. u get the new rods and put it into the oil filler cap. they are self assembling, they will tumble around for a while but they will find where they fit and start working again. The holes can be left open, so the next time you need new rods u dont have to dissasemble the engine!
@grangeroo Acually my uncle dropped 3 rods on his diesel at the trail and drove it 5 miles to the bar. All three rods went through the oil pan so with 5 cylinders and no oil this truck hauled ass to the bar doin like 65 mph. Never fired again after he shut it off, heat siezed the shit outta it.
i would change that engine and make it run further . the block can be bought from scrapyards that specialise in spares. i have done a conversion but not like your one. iv done a whole Engine Drop. Ding the ambulance if the con rod hit you :- 999.
That engine had really tight tolerances on the piston rings and bearings which is a good thing, because it's makes the engine last 200,000 miles easily. But with no oil it will come apart but quick. It sounded like that engine still had allot of miles left on it. Too bad the car was not taken care of and it ended up on the scrap heap.
I am a scrap dealer and i only get the cars after thay are rooted.but we got this one started. the car was worth more in scrap than anyone would have payed for a car that is rooted(but ran).I have got a large yard full of rooted cars and we can get some of them to RUN, so any one need a GOOD car like this one let me know and i will sell it to them and thay can FIX it.some have ONLY 5,000,000,000,000 kms on the clock and others have ONLY small dents where one door touches the other side!!. Razor.
Poor Toyota 4A engine..
Lasselkv28 4 months ago
hey theres an oil leak
monstermiataman 7 months ago
it looks as if the previous owner never changed the oils thus leading to catasrtophic engine failure...
fordxbgtfalcon 11 months ago
I think you need an oil change.
KissRocksForever 1 year ago
that things like BP theres oil all over the place
MUSTANGMAN50LX 1 year ago
"well there's yer problem"
iamsuperbleeder 1 year ago
Gorilla Tape will fix that no problem
Ferraro8191 1 year ago 2
bearing rod or main bearings?
CheckEngine99 1 year ago
Should run just fine
tigerwoodsisadrunk 1 year ago
Its a toyota change the oil top off the fluids maybe some new spark plugs and she will run like new jk lol.
Psychopathicryda208 1 year ago
yep! thats catastrophic failure. Soon as one rod is lost, the oil pressure is lost also.
Thus all bearings are starved of oil which leads to very quick destruction of the other engine components. Ie. throwing more rods.
vkorinfsky 1 year ago
WOA HAPPEN?+
LTV249 1 year ago
Billy Mays here with MIGHTY PUTTY! FIX HOLES IN YOUR BLOCK!! GOOD AS NEW! lol
I kid Billy Mays...
SuperMustangDude 1 year ago
duck tape!!
14lessthan1 2 years ago
a little JB weld and she'll be good as new
dougefresh3830 2 years ago 4
Take those rods and pistons out, great stuff up the wholes and runner on 1 cyl. or 3. or 5. Idk what kinda car that was.
abbott911 2 years ago
If you listen you can hear the other rods thinking about making a run for it too!
danielwetpaint 2 years ago
whooo , lol. crazy
techme06 2 years ago
tiger hair will do her good
Samsonite4188 2 years ago
pardon me for sounding odd, it was not me, it was my rods, they just popped out to say hello, and now theyre gone back down below! lol
Toiger654 2 years ago 3
Hammer and duck tape :)
05560421 2 years ago 4
ah the maguyver fix!
subiemon 2 years ago
just duct tape the rods back together and put a little duct tape over the hole in the block and wipe up all that oil and wring it back into the engine and crank er up no problem we feex
DRNEGOLICIS 2 years ago 17
I vote we donate some gummy bears and pixie dust. She'll be better than new.
douger0500 2 years ago
@DRNEGOLICIS
na man all wrong. u get the new rods and put it into the oil filler cap. they are self assembling, they will tumble around for a while but they will find where they fit and start working again. The holes can be left open, so the next time you need new rods u dont have to dissasemble the engine!
Paiste402 1 year ago 2
@Paiste402 yes thats another good way to fix it
DRNEGOLICIS 1 year ago
oh... now that will just be fine. Start it up!
kyl75 2 years ago
Is it broken now?
martijnjanmaat 2 years ago
just put new spark plugs in and wash it it will be fine lol
e30bimmerdriver 2 years ago
maybe need a tune up?
juliofrausto89 2 years ago
holee shat,
siTTinLo420 2 years ago
Ahh.. now theres your problem
Bobbit323 2 years ago
looks good can ya give me A ride to work /?
barnett256 2 years ago 2
jesus did you put bleach in the oil or just run the piss out of it!!
superchase08 2 years ago
Not a bit hot ..
EdenAlabama 2 years ago
You wasted more time to add a cuss word to it. Just reinforced my point for me :D Thanks.
TestECull 2 years ago 2
yeh i think shes fucked mate
g3nzz 2 years ago 2
Ouch.
Moe145 2 years ago
How u gonna get to the beer store now?
grangeroo 2 years ago 20
@grangeroo Acually my uncle dropped 3 rods on his diesel at the trail and drove it 5 miles to the bar. All three rods went through the oil pan so with 5 cylinders and no oil this truck hauled ass to the bar doin like 65 mph. Never fired again after he shut it off, heat siezed the shit outta it.
JakeWeb93 1 year ago
@JakeWeb93 I'm calling bull on that one stupid yank.
racefactory900 1 year ago
i would change that engine and make it run further . the block can be bought from scrapyards that specialise in spares. i have done a conversion but not like your one. iv done a whole Engine Drop. Ding the ambulance if the con rod hit you :- 999.
Hindushotta 2 years ago
mass carnage
nkatsinas 2 years ago
i see the oil, just not the filter
immadodgeguy 2 years ago
maybe he didnt notice the other damage and was gonna do a service!lol.
tpvalley 2 years ago
umm where the oil filter go? i see the oil filter treads
999Toyotaforlife999 3 years ago
change your oil kids
SY1WEK 3 years ago
1. It's "Dropped". "droped" isn't a word.
2. 'droping' isn't a word, either. 'dropping" is what you meant...i think.
TestECull 3 years ago
Nerd!
spotandedgar 2 years ago
You wasted your time replying to a four month old comment just to spam up Youtube?
Wow, and here I thought I had no life...
TestECull 2 years ago 2
POS domestic lol
Index51 3 years ago
High quality rock-solid car, you mean.
Laofse 3 years ago 5
one careful lady driver...
LMF5000 3 years ago
That's a Toyota, lol. The Author of this is from Australia.
O16581724525 2 years ago 4
You do good work!
duanedragon2 3 years ago 2
looks like an engine massacre happened... oil splattered everywhere...
willbill808 3 years ago 3
i feel bad for it
atomicengineer 3 years ago
Looks like the car is bleeding, :)
MatrixNation08 3 years ago 3
U aint kidding about the bleeding part, bleeding oil that is!!! LOL; what a goof, whoever did this LOL :D
matts6887 3 years ago
shit
polarisindyxlt 3 years ago
That engine had really tight tolerances on the piston rings and bearings which is a good thing, because it's makes the engine last 200,000 miles easily. But with no oil it will come apart but quick. It sounded like that engine still had allot of miles left on it. Too bad the car was not taken care of and it ended up on the scrap heap.
Max9507 4 years ago 2
I am a scrap dealer and i only get the cars after thay are rooted.but we got this one started. the car was worth more in scrap than anyone would have payed for a car that is rooted(but ran).I have got a large yard full of rooted cars and we can get some of them to RUN, so any one need a GOOD car like this one let me know and i will sell it to them and thay can FIX it.some have ONLY 5,000,000,000,000 kms on the clock and others have ONLY small dents where one door touches the other side!!. Razor.
RazortheAmazor 4 years ago 6
ill take the 1 where the small dent where 1 door touches the other side! itll make it easy for tight parking!
cam92rss 3 years ago 2