@CarolinaGamer when i plug in my drive shows up but com ports dont , im usung xbox as powersource, only sata cable pluged in is one going from ck3 to hard drive im pluged in usb of lap top , without com ports or anything showing up on the rightside is it safe to coninue?
Can't thank you enough. I did an initial flash of my drive using this tutorial and came back about a year later to reflash my drive with the new LT 3.0 and you have the best tutorial I've found for flashing with the Probe 3.
Is there anyway to safely power cycle the drive with only the Xbox drive and a computer? I have the original dummy.bin file from a previous flash and I just want to update it to the latest LT 3.0 firmware
Ok so Im slightly confused, your video seems to before the most straight forward and you explain everything, but i still feel confused haha, so I need to purchase both XBOX360 Pro and the CK3 Probe right?
@CarolinaGamer so does hitting the switch on the Probe 3 power on and off your Drive ? Because the instructions say to turn your DVD drive on and off.
Once you have probed the drive and got the key , do you have to probe the drive every time you flash that drive? or once you have probed and got the key do you not have to probe again?
@CarolinaGamer Which one, both or just Probe 3? Because I'm going to use the power from the Xbox 360 to power the DVD Drive. And If I connect the Probe 3 cable from the motherboard to the DVD drive, I want to know if press that button will turn the DVD drive and Probe 3 off and on. So obviously if you press the button down it will turn the Probe 3 off (in your video it shows this) but also the power to the DVD drive ?
@4bitMan Ok. Well then pretend I didn't say I'm using the Xbox 360 as a power source. When you powered the DVD Drive with the CK3 Pro/Lite, to turn on the DVD drive off and on, did you use the button on the Probe 3 cable, or to turn the drive off and on (as per the instruction) did you use the Probe 3 ? I only say this because It kind of looked like you were pressing the Probe 3 to turn off and on the DVD drive (while of course also doing the same with the Probe device). So....
Woops I meant "When you powered the DVD Drive with the CK3 Pro/Lite, to turn on the DVD drive off and on, did you use the button on the PROBE 3 CABLE, or to turn the drive off and on (as per the instruction) did you use the CK3 PRO/LITE SWITCH?" As per the instruction of JungleFlasher.
well the ck3 well it work for any lite on drive well someone explain to me what i actually need to do this can i do it with out that sata port because i have a cpu with out sata ports its windows xp
@darkmage4446 YOU WILL NEED ALL THE TOOL WENT EVER YOU BUY THE CK3 IT WILL COME WITH A SATA CABLE AND YOU WILL NEED TO BUY THE $60 ONE WITH A PROBE YOU ALSO NEED TO INSTALL JUNGLEFLASHER IXTREME AND WENT EVER YOU OPEN JUNGLEFLASHER MAKE SURE YOU RUN AS AMINISTRATION JUST LEFT CLICK ON JUNF AND IT WILL ASK YOU ((NOW IF YOU DO THIS MAKE SURE TO SAVE ALL THE FILE JUST IN CASE YOU FUCKER UP YOU CAN GO BACK IN REINSTALL EVERYTHING AND TRYING AGAING))))
I have everything connected and setup with the CK3 probe and 360USBpro connected but when I go to click The 'SlimKey' Button under the 'DVDKey 32' Tab it always comes up with the error 'No Drive Detected! DVDKey files extraction aborted!' What can I do?
So all you need is the probe 3 to unlock/flash and just use the power supply from the xbox to flash a 9 series drive ?? so it's only gonna cost me only like $15
i didnt get where u stick the probe can you tell me where, and is there a specific place to stick that in every type of lite on drive or is it the same place on everything lite on? please help ill sub if you do
Thank you thank you thank you! Just did it step by step with your video...only difference was mine was connected straight to my mobo's sata, since my chipset is compatible. Thank you.
Do NOT use the power from the Xbox for ur drive, because it will log in the OS that it had no drive.. (when u turn the xbox on ofc).. Then later if u decide to flash ur drive back to stock so u can play online, u will get banned..
@CarolinaGamer Hmm, I got a friend who has flashed a few Xboxes using the same method as you, he told me the stuff I needed, such as Ck3 Probe 3, CK3 Lite or Pro and the xecuter usb pro. Didn't tell me stuff about the molex adapter. is it possible to just use the ck3 lite as the powersource?
@CarolinaGamer I'm using a desktop. But when I searched for "Molex adapter" on ebay I saw the usual power adapter for the xbox WTF? I don't think that's the one I need to use. Could you tell me in details please?
Why a power source when the 360USB Pro has a power source for the DVD drive? I have a CK3 Pro Rev D and CK3 Probe 2 can I use them for the power source for the drive. What is the purpose of the Molex Power adapter and board that you use in one of your other you tube videos? Is that necessary if you have the 360USB Pro or is that an additional power source for the CK3 Probe 3 and drive needed together with the 360USB Pro to make this work correctly? If there is a link for this Board?
im trying to flash the same exact drive and i plan on only purchasing the Probe 3. Do i really need the x360usb pro and what was that "power source" at 1:10 and what's powering that? do i need that too or can i just use the power from my 360?
i think i have a 1.6 firmware on my 93450c, and i want to reflash it again because i can't play backups no more. forum told me to reflash to play backups again. FYI i dont care if i get banned. Can i reflash it again using SATA cables? and i used to play with a boot disc
Hey thanks for the vid. I have prob though. I did everything just as u did. The last step was to write and when hitting that it said writing to bank 0 but nothing else. When I turn off and back on refresh it also says no drive detected now. What did i do wrong and canI fix it. Also what is it writing to if u dont probe but once to get the key?
Ok so i think i messed up. I did all that but when i get to the part of writing but mine only says vendor mode. and i dont know how to get it out of there.
Was wondering where to buy the X360USB Pro, the sites I looked at list all kinds of additional components with it, from what I understand you need the USBPro, the probe Ck3 lite or pro, not sure about this, and the drive power addon which I assume is the molex power adapter. Any help would be appreciated.
hey good vid but i was wondering if i could do flash my liteon 93450C this with just a ck3 pro and a probe 3? because the description of the product says that the ck3 pro can be used for key extraction which is the purpose of usb pro?
help guys i have a liteon 83850 v2 ... can i flash y drive wirhout to use xboxusb .. just with using the ck3 pro and the ck3 probe 3 and the via card is passblie ??? help
is the x360 pro all you need to flash the xbox 360 slim? i have a macbook pro with windows for bootcamp. to power the drive cant you just use the wire for the xbox and turn it on instead of getting the CK3 pro? Please help
@00through09 Yes but it will flag your xbox when you turn it on if you don't have your drive connected through the sata port on it which means you will get banned unless you unflag it before going online which is kinda hard and you will have to buy soldering equipment. So if you using the xbox for online you need the CK3 lite (cheaper than the pro).
Hey carolina how can I flash a 7 series lite-on without a dvd-key? How can I retrieve it then flash to stock,update on xbl and flash to LT 1.9 any help is appreciated :) or even a video...Thanks!
can you please send me a link to the website to by all of these parts, also can you tell me or send me the version of jungle flasher that you are using?
@BeastModeLoser you can go to xconsoles or found my dot com and they will have everything you need, as fro jungle flasher just go to the team jungle site.
Hey i have a question? i had my drive update to the last firmware but i didnt do it. i have the x360 usb pro, probe 3 and the ck3 power switch. auto loader ixtreme. cant oped file.c\user\myname\download\fw and jungleflasher\jungleflasher v0.1.84 beta (250)\firmware|ltpuse-025v1.9.bin... what im i doing wrong. please help
Can't thank you enough man. I was reading tutorials for hours hitting my head agianst the wall about what to do. After watching your video I was able to flash my 83850c v2 in about 20 mins. One tutorial I was using was telling me to probe in the wrong place! Can't thank u enough man.
when i go to jungle flasher everything is the same as yours but on mine where it says dvd key mine says not found could you please tell me why it says thay?and help me please.
@CarolinaGamer Im about to use a laptop as well, i was wondering what could i use for a power supply. will a 4 pin molex cable work? or what can i buy to power these cords?
@AoKerr ok thanks. my probe and x360usb pro just came in the mail today but i notice i have nothing to connect my probe to my molex cable. does this mean i need to buy a ck3 pro?
@RockyMoDsTV Yes but you will be flagged for a ban because there will be no dvd drive plugged in the xbox, so unless you don't care about going online or have a spare xbox that is broke or something don't do it.
This has been flagged as spam show
@CarolinaGamer when i plug in my drive shows up but com ports dont , im usung xbox as powersource, only sata cable pluged in is one going from ck3 to hard drive im pluged in usb of lap top , without com ports or anything showing up on the rightside is it safe to coninue?
2099mrspidey 1 month ago
Can't thank you enough. I did an initial flash of my drive using this tutorial and came back about a year later to reflash my drive with the new LT 3.0 and you have the best tutorial I've found for flashing with the Probe 3.
Judicator924 1 month ago in playlist Misc.
Is there anyway to safely power cycle the drive with only the Xbox drive and a computer? I have the original dummy.bin file from a previous flash and I just want to update it to the latest LT 3.0 firmware
NortonShootsYou 2 months ago
where do i get the programmer?
cewsr1978 2 months ago
This has been flagged as spam show
my pc does not have a sata port on motherboard,it only has the one for dvd driver can i connect that sata to xbox360?
cladio1299 2 months ago
This has been flagged as spam show
dont use dvdkey32 its not necessary use a ck3 probe usb360 pro and ck3 pro and replace you laser ribbon if your drive isnt reading games or movies
codowner00 2 months ago
do you have an pc or a laptop
spiel360PC 2 months ago
@spiel360PC A laptop is a PC. Lol.
iCryonikz 2 months ago
what you used for the power? I saw u connected the power cable with a circuit. What circuit is that?
sciptofanic 2 months ago
Ok so Im slightly confused, your video seems to before the most straight forward and you explain everything, but i still feel confused haha, so I need to purchase both XBOX360 Pro and the CK3 Probe right?
crusader2893 2 months ago
@crusader2893 made a typo my bad, replace "before" with "be the" lol
crusader2893 2 months ago
@crusader2893 no you can do it with a VIA card also instead of a xbox360pro, its cheaper.
19Bill94 1 month ago
Is jungle flasher the only software i will have to download? And if i have a sata cable or port in my tower will i need a x360usb pro?
IHIoNdA 2 months ago
damn its so much easier to do this than it used to be. its just the games that are a bitch now
shaeguitar 3 months ago
I didn't see you turn off your DVD Drive off and on, can you tell me why ?
4bitMan 3 months ago
@4bitMan I didn't I hit the switch on the probe III cable.
CarolinaGamer 3 months ago
@CarolinaGamer so does hitting the switch on the Probe 3 power on and off your Drive ? Because the instructions say to turn your DVD drive on and off.
4bitMan 3 months ago
shit i just bricked it, fuck! hahaha whatever
thefloatingcheese2 3 months ago
why does mine have a red light on the usb pro?
thefloatingcheese2 3 months ago in playlist xbox modding
where can i buy the probe and all that stuff i cant find anywhere eon google T- T
AlphaNxOmega 3 months ago
Once you have probed the drive and got the key , do you have to probe the drive every time you flash that drive? or once you have probed and got the key do you not have to probe again?
TheWilkeh 3 months ago
@TheWilkeh No you only need the things you saved.
ThroughMyScope 1 week ago
Yo, does that button you press on the cable turn the DVD Drive on and off, or does that cable you press only power on the Probe 3 on and off ?
4bitMan 3 months ago
@4bitMan It will turn it off then back on.
CarolinaGamer 3 months ago
@CarolinaGamer Which one, both or just Probe 3? Because I'm going to use the power from the Xbox 360 to power the DVD Drive. And If I connect the Probe 3 cable from the motherboard to the DVD drive, I want to know if press that button will turn the DVD drive and Probe 3 off and on. So obviously if you press the button down it will turn the Probe 3 off (in your video it shows this) but also the power to the DVD drive ?
4bitMan 3 months ago
@4bitMan I don't support flashing a drive using the console as a power source so I can not help you, as I have never done it so I do not know.
CarolinaGamer 3 months ago
@4bitMan Ok. Well then pretend I didn't say I'm using the Xbox 360 as a power source. When you powered the DVD Drive with the CK3 Pro/Lite, to turn on the DVD drive off and on, did you use the button on the Probe 3 cable, or to turn the drive off and on (as per the instruction) did you use the Probe 3 ? I only say this because It kind of looked like you were pressing the Probe 3 to turn off and on the DVD drive (while of course also doing the same with the Probe device). So....
4bitMan 3 months ago
Woops I meant "When you powered the DVD Drive with the CK3 Pro/Lite, to turn on the DVD drive off and on, did you use the button on the PROBE 3 CABLE, or to turn the drive off and on (as per the instruction) did you use the CK3 PRO/LITE SWITCH?" As per the instruction of JungleFlasher.
4bitMan 3 months ago
@4bitMan yes just follow what I do.
CarolinaGamer 3 months ago
@CarolinaGamer Oh thanks man. Yeah I did more research. Sorry for cluttering your page with these silly questions. Cheers man!
4bitMan 3 months ago
@4bitMan No problem thats what I'm here for
CarolinaGamer 3 months ago
well the ck3 well it work for any lite on drive well someone explain to me what i actually need to do this can i do it with out that sata port because i have a cpu with out sata ports its windows xp
darkmage4446 3 months ago
@darkmage4446 YOU WILL NEED ALL THE TOOL WENT EVER YOU BUY THE CK3 IT WILL COME WITH A SATA CABLE AND YOU WILL NEED TO BUY THE $60 ONE WITH A PROBE YOU ALSO NEED TO INSTALL JUNGLEFLASHER IXTREME AND WENT EVER YOU OPEN JUNGLEFLASHER MAKE SURE YOU RUN AS AMINISTRATION JUST LEFT CLICK ON JUNF AND IT WILL ASK YOU ((NOW IF YOU DO THIS MAKE SURE TO SAVE ALL THE FILE JUST IN CASE YOU FUCKER UP YOU CAN GO BACK IN REINSTALL EVERYTHING AND TRYING AGAING))))
frozt2704 3 months ago
This has been flagged as spam show
I have everything connected and setup with the CK3 probe and 360USBpro connected but when I go to click The 'SlimKey' Button under the 'DVDKey 32' Tab it always comes up with the error 'No Drive Detected! DVDKey files extraction aborted!' What can I do?
AndrewMaxHastings 3 months ago
hey man, first time flashing, and i bought the whole bundle kit. won't be much of a problem rite?
kankurou89 3 months ago
@kankurou89 Nope you should not have any problem with the old liteon drives.
CarolinaGamer 3 months ago
@CarolinaGamer thanks man. just 1 more Q. if anything did happen, how can I revert to stock firmware for the dvd drive? cheers mate.
kankurou89 3 months ago
@kankurou89 omg why do you so many stuff?? lolz managed to flash mine with mini probe and the xecuter v3
Trendnet18 3 months ago
@Trendnet18 i dont have a pc. just a laptop.. so i need the usb pro man..
kankurou89 3 months ago
@kankurou89 btw if i want to unmod do i need to extract the key again??
Trendnet18 3 months ago
help my lite on is not working when am flashing the my computer freeze can someone help me
bonnahventure 4 months ago
Hey, man thanks for the upload it helped out alot. you know where i can find a vid for the slims?
tucantoto89 4 months ago
does probe II work with this or just III
MLGZARO7 4 months ago
So all you need is the probe 3 to unlock/flash and just use the power supply from the xbox to flash a 9 series drive ?? so it's only gonna cost me only like $15
Swiper360 4 months ago
Gr8 video ... Do u know from where I can order the full set of those tools? and the name for each one :) thank you for the tutorial :)
pirate8877 4 months ago
@pirate8877 i would suggest xconsoles(.)com
tucantoto89 4 months ago
i didnt get where u stick the probe can you tell me where, and is there a specific place to stick that in every type of lite on drive or is it the same place on everything lite on? please help ill sub if you do
F41THxD34L3R 4 months ago
@F41THxD34L3R Watch the video in HD, and you will see where it goes, and yes the probe goes into the same point on every phat liteon drive.
CarolinaGamer 4 months ago
@CarolinaGamer and also i dont want to use the X360USB Pro i sata connecters on my pc can i just connect the sata straight to my pc
F41THxD34L3R 4 months ago
@F41THxD34L3R If you want to fight with the drivers then go a head, but I do not offer support for anything other then the X360USb Pro.
CarolinaGamer 4 months ago
@F41THxD34L3R what did you use to power the drive ? was it the system it self
ren4484 4 months ago
@ren4484 i used a power supply
F41THxD34L3R 4 months ago
@F41THxD34L3R i could tell you where to stick it
yeahenglish 4 months ago
@yeahenglish nvm i found out thanks anyways
F41THxD34L3R 4 months ago
Thank you thank you thank you! Just did it step by step with your video...only difference was mine was connected straight to my mobo's sata, since my chipset is compatible. Thank you.
afoehrkolb 4 months ago
i had my xbox 360 flashed by some guy, without the keys i ordered ck3 pro and ck3 probe online is that enough for me toupdate my xbox to 1.1 to 2.0
tawak11 4 months ago
do i unluge every thing when i'm done flashing or leave every thing there and play like that ?
IXtremeMaster 4 months ago
titties
liljesus214 5 months ago
Isnt there someplace where you can bbuy eveything needed, in one package? the Xecuter CK3 Probe 3, the cdi card just EVERYTHING.
darkerca 5 months ago
do i have to take all the x360usb pro stuff out when the driver is flashed or i have to leave it in ther or always have to keep it open? plz responed
TheXGoldenPhoenix 5 months ago
can i use my PC (not a laptop) for power source?
ivarkr 5 months ago
Do NOT use the power from the Xbox for ur drive, because it will log in the OS that it had no drive.. (when u turn the xbox on ofc).. Then later if u decide to flash ur drive back to stock so u can play online, u will get banned..
adrianc0669 5 months ago
What did you use as your "Power source for the drive" ?
Dizzlingx 5 months ago
@Dizzlingx ck3 lite or pro and molex adapter.
CarolinaGamer 5 months ago
@CarolinaGamer Hmm, I got a friend who has flashed a few Xboxes using the same method as you, he told me the stuff I needed, such as Ck3 Probe 3, CK3 Lite or Pro and the xecuter usb pro. Didn't tell me stuff about the molex adapter. is it possible to just use the ck3 lite as the powersource?
Dizzlingx 5 months ago
@Dizzlingx if you are using a desktop and want your pc open, you can. If you what it all external you need a molex.
CarolinaGamer 5 months ago
@CarolinaGamer I'm using a desktop. But when I searched for "Molex adapter" on ebay I saw the usual power adapter for the xbox WTF? I don't think that's the one I need to use. Could you tell me in details please?
Dizzlingx 5 months ago
@CarolinaGamer what's the difference between the lite and the pro?
4DaMovieGuru 5 months ago
@CarolinaGamer when did you connect the molex adapter to your ck3 pro in this video?
padard 5 months ago
Why do you extract the key at first if the probe is off?
aztecterrorism 5 months ago
Why a power source when the 360USB Pro has a power source for the DVD drive? I have a CK3 Pro Rev D and CK3 Probe 2 can I use them for the power source for the drive. What is the purpose of the Molex Power adapter and board that you use in one of your other you tube videos? Is that necessary if you have the 360USB Pro or is that an additional power source for the CK3 Probe 3 and drive needed together with the 360USB Pro to make this work correctly? If there is a link for this Board?
imun1ty 5 months ago
@imun1ty The x360 USB Pro is for the Sata, has nothing to do with power.
CarolinaGamer 5 months ago
do you have alternate solutions if someone dont have a molex adaptor?
NandaTemee 5 months ago
I already have drivekey can i just use the usbpro to update new LT? Also do i have to have the molex psu?
MM34ify 5 months ago
Damn, you breath heavy.
BrandurJustinussen 6 months ago
Extreme modding noob here, Does this work with the latest xbox live update?
crazy8cs 6 months ago
im trying to flash the same exact drive and i plan on only purchasing the Probe 3. Do i really need the x360usb pro and what was that "power source" at 1:10 and what's powering that? do i need that too or can i just use the power from my 360?
Kevo726 6 months ago
Comment removed
nimax1987 6 months ago
@CarolinaGamer Did you connect your CK3 pro to a molex adapter?
padard 6 months ago
@padard yes
CarolinaGamer 6 months ago
CK3 Pro (or Lite) is stricly necessary? Can I do the flashing operation without it? :)
nimax1987 6 months ago
@nimax1987 You need the CK3 to power your drive. Most people use their xbox to do that, but its not recommended.
padard 6 months ago
This has been flagged as spam show
@padard Thank you! :) What will happen if I'll power the drive with the console?
nimax1987 6 months ago
Hey man, to extrack the key what exactly do i need?? II know the probe 3 but im not sure what else
Yardz360 6 months ago
this system works with the probe v2?
stevenitro93 6 months ago
i think i have a 1.6 firmware on my 93450c, and i want to reflash it again because i can't play backups no more. forum told me to reflash to play backups again. FYI i dont care if i get banned. Can i reflash it again using SATA cables? and i used to play with a boot disc
KarlNuevo16 6 months ago
total newb question, u connected the drive to your computer via usb correct?
andayy 6 months ago
@andayy Yes with the X360USB Pro.
CarolinaGamer 6 months ago
ok this will be my first time flashing and i plan on doing it with my 64 bit windows 7 laptop so if i buy the $100 bundle is that all i need? thanks
mrgary6 6 months ago
@mrgary6 if the bundle has the x360usb, probe 3, CK3(lite or Pro) and molex adapter you'll be all set.
CarolinaGamer 6 months ago
XECUTER X360USB PRO XECUTER CK3 PRO (REV D) XECUTER CK3 PROBE 3 XECUTER HDD ADAPTER (PHAT DRIVES) XECUTER XT ADAPTER XECUTER UNLOCK KIT V2 (PHAT MODELS)
this is everything it comes with
mrgary6 6 months ago
Hey thanks for the vid. I have prob though. I did everything just as u did. The last step was to write and when hitting that it said writing to bank 0 but nothing else. When I turn off and back on refresh it also says no drive detected now. What did i do wrong and canI fix it. Also what is it writing to if u dont probe but once to get the key?
Thanks
gschadler 6 months ago
i keep getting phat key failed what 2 do
PopulaR127 6 months ago
Ok so i think i messed up. I did all that but when i get to the part of writing but mine only says vendor mode. and i dont know how to get it out of there.
What can i do?
mygod90 6 months ago
@mygod90 If you have your key and made your CFW, just click write.
CarolinaGamer 6 months ago
@CarolinaGamer Ok now it completely stopped detecting my drive
Its connected the same as it was before..
Do you think i fried the drive?
mygod90 6 months ago
@mygod90 No If you have your key your fine, just do lite on erase and then flash that way.
CarolinaGamer 6 months ago
Was wondering where to buy the X360USB Pro, the sites I looked at list all kinds of additional components with it, from what I understand you need the USBPro, the probe Ck3 lite or pro, not sure about this, and the drive power addon which I assume is the molex power adapter. Any help would be appreciated.
JLewinCO 7 months ago
@JLewinCO Xconsoles or foundmy.com is your best bet. and yes those are the things you need.
CarolinaGamer 7 months ago
hey good vid but i was wondering if i could do flash my liteon 93450C this with just a ck3 pro and a probe 3? because the description of the product says that the ck3 pro can be used for key extraction which is the purpose of usb pro?
Lan78691 7 months ago
Thanks man, you helped me get started modding xbox 360's
Rmadrid9510 7 months ago
So how do I do this with a normal xbox 360 as a power supply to the drive?
lewisgreg981 7 months ago
@lewisgreg981 Um you dont.
CarolinaGamer 7 months ago
@CarolinaGamer Sorry dude I found the REV D sorry bro. :D
lewisgreg981 7 months ago
Comment removed
lewisgreg981 7 months ago
im a newbie at this so why exactly do u need that extra energy source cant u just sign out and use ur xbox power
TyKelly100 7 months ago
Beautiful.
dark1entity2005 7 months ago
it just keeps on saying phatkey failed and i done exactly what you did
STICKYFINGAZN15 7 months ago
WHERES THIS MAGICAL POWER SOURCE COMING FROM
STICKYFINGAZN15 7 months ago
hey bro where did you get the probe?
throughhymn 7 months ago
Do you have the ck3 hooked to a molex power supply?
Connor1197 7 months ago
@Connor1197 Yes.
CarolinaGamer 7 months ago
@CarolinaGamer can u use the xbox 360 as a power source and i dont care if i get banned
STICKYFINGAZN15 7 months ago
Is it possible to flash an xbox 360 using windows vista?
Rmadrid9510 7 months ago
@Rmadrid9510 yes
myricalboi317 7 months ago
When you buy that probe it comes with that whole wire with the switch?
KMCGamer 8 months ago
@KMCGamer Yes sir, it definitely does.
CarolinaGamer 8 months ago
can i do the same with liteon 83850c v2 without xbox usb pro just with via card sata
121evan 8 months ago
help guys i have a liteon 83850 v2 ... can i flash y drive wirhout to use xboxusb .. just with using the ck3 pro and the ck3 probe 3 and the via card is passblie ??? help
121evan 8 months ago
@121evan Yes
AoKerr 8 months ago
is the x360 pro all you need to flash the xbox 360 slim? i have a macbook pro with windows for bootcamp. to power the drive cant you just use the wire for the xbox and turn it on instead of getting the CK3 pro? Please help
00through09 8 months ago
@00through09 Yes but it will flag your xbox when you turn it on if you don't have your drive connected through the sata port on it which means you will get banned unless you unflag it before going online which is kinda hard and you will have to buy soldering equipment. So if you using the xbox for online you need the CK3 lite (cheaper than the pro).
AoKerr 8 months ago
This has been flagged as spam show
Ive only bought the X360USB Pro, but do i have to buy the Probe III aswell?
WaaZaaa91 8 months ago
Ive only bought the X360USB Pro, but do i have to buy the Probe III aswell?
WaaZaaa91 8 months ago
@WaaZaaa91 If you have a lite on drive, yes.
AoKerr 8 months ago
u dont need the CK3 u only need the Probe 3???? whaaaaaaaaaa lol
6satan6ist6 8 months ago
This has been flagged as spam show
Hey carolina how can I flash a 7 series lite-on without a dvd-key? How can I retrieve it then flash to stock,update on xbl and flash to LT 1.9 any help is appreciated :) or even a video...Thanks!
TheArchitect718 8 months ago
Comment removed
TheArchitect718 8 months ago
can u use a laptop
FrothiestAustin 8 months ago
@FrothiestAustin yes
AoKerr 8 months ago
hey do i need a ck probe 3 to flash my 83850c v1 dvd drive. I allready bought a ck3 pro.
message me back.. thx
yoseaweed 8 months ago
@yoseaweed yes you do
IICambodiaII 8 months ago
Hey dude do you need the little black square thing that you connected the sata cable to and what's the name of it? Thanks :D
lewisgreg981 8 months ago
one question, what slot did you stick the probe in?
JsmithFF7 8 months ago
can you please send me a link to the website to by all of these parts, also can you tell me or send me the version of jungle flasher that you are using?
BeastModeLoser 8 months ago
@BeastModeLoser you can go to xconsoles or found my dot com and they will have everything you need, as fro jungle flasher just go to the team jungle site.
CarolinaGamer 8 months ago
do i need a power thing or can i use my xbox to power up the drive ?
muska4life123 8 months ago
Hey i have a question? i had my drive update to the last firmware but i didnt do it. i have the x360 usb pro, probe 3 and the ck3 power switch. auto loader ixtreme. cant oped file.c\user\myname\download\fw and jungleflasher\jungleflasher v0.1.84 beta (250)\firmware|ltpuse-025v1.9.bin... what im i doing wrong. please help
manokdog 8 months ago
why didnt you use the probe on the r707 and did you install any drivers to get your probe to work?
longbeachreppin4 8 months ago
thanks a lot, also for the HD quality!
QuikDJ 8 months ago
Can't thank you enough man. I was reading tutorials for hours hitting my head agianst the wall about what to do. After watching your video I was able to flash my 83850c v2 in about 20 mins. One tutorial I was using was telling me to probe in the wrong place! Can't thank u enough man.
Judicator924 8 months ago
what am i doing wrong it extracts the key but when i hit ok it says key failed...
cseck1 8 months ago
hey jungleflasher cant find my drive what im i doing wrong.
manokdog 8 months ago
R u flashing dvd drives for people
howzechris1 8 months ago
Does it make a difference if I use the probe 2 instead?
QuikDJ 8 months ago
Can somebody PLEASE answer my last question about how too power off then on the dvd drive, Which switch do i use too do this?
cseck1 8 months ago
l wonder if i can to flash my xbox but l have mac pro, can l do it with X360usb pro. ???
Xbox360Slims 8 months ago
How do u turn the drive on and off what switch do u use?
cseck1 8 months ago
Thanks!
xOwnageMasterx 9 months ago
when i go to jungle flasher everything is the same as yours but on mine where it says dvd key mine says not found could you please tell me why it says thay?and help me please.
TheWILMINGTON13 9 months ago
How do i power up the ck3 pro im using a laptop?
cseck1 9 months ago
@cseck1 with the molex .. u have to have external psu.
pashaamma 8 months ago
never mind dont answer that question
TheWILMINGTON13 9 months ago
what did you use to power the probe 3
TheWILMINGTON13 9 months ago
where do you get the firmware for your particular drive, i searched around ixtremes website and jungle flashers but cant find it, please help me :)
Peuge0tXR6 9 months ago
@Peuge0tXR6 It's on xbins.
CarolinaGamer 9 months ago
thanks dude this tut helped, made it as easy as pie :)
Peuge0tXR6 9 months ago
thanks for this tutorial! very helpful
SteveDutchy 9 months ago
Comment removed
SteveDutchy 9 months ago
This has been flagged as spam show
ok when i put the probe 3 on the DVD source it needs at 2:07 and it get to the screen
2:22 then i wait 5 seconds and hit ok it says failed what do i do?
KingTodd20 9 months ago
ok when i put the probe 3 on the DVD source it needs at 2:07 and it get to the screen
2:22 then i wait 5 seconds and hit ok it says failed
KingTodd20 9 months ago
yo when power on and off the DVD drive do i just hit the prob button or just use the switch to turn it off then on
KingTodd20 9 months ago
@KingTodd20 use the switch for turning it off and on you do not have to touch the CK3 power button at all, other then to initially turn it on.
CarolinaGamer 9 months ago
@CarolinaGamer wait so can i flash with my laptop right?
TheLegend2294 8 months ago
@TheLegend2294 Yes, as long as you have an external PSU.
CarolinaGamer 8 months ago
@CarolinaGamer Ok, thanks.
TheLegend2294 8 months ago
@CarolinaGamer Im about to use a laptop as well, i was wondering what could i use for a power supply. will a 4 pin molex cable work? or what can i buy to power these cords?
RockyMoDsTV 7 months ago
@RockyMoDsTV Yes it should be $10 on ebay. Copy & Paste - External Power Supply 12V DC 4-Pin Molex Adapter Cable - for an easy find.
AoKerr 7 months ago
@AoKerr ok thanks. my probe and x360usb pro just came in the mail today but i notice i have nothing to connect my probe to my molex cable. does this mean i need to buy a ck3 pro?
RockyMoDsTV 7 months ago
@RockyMoDsTV Yes but the Ck3 lite is 10 or more dollars cheaper and can be used to power the usbpro, get that.
AoKerr 7 months ago
@AoKerr ok thanks, one last question. Counldnt i just use the xbox360 to power my probe3?
RockyMoDsTV 7 months ago
@RockyMoDsTV Yes but you will be flagged for a ban because there will be no dvd drive plugged in the xbox, so unless you don't care about going online or have a spare xbox that is broke or something don't do it.
AoKerr 7 months ago
do i need ck3 to power up the drive? thanks
brunogt1982 9 months ago