I rigged up a kill switch in my car that's hidden in the boot, but instead of preventing ignition itself, It cuts off the power to the fuel pump in the rear of the car (mean very little wire for a would be thief to find). so if you start it, it will run for 1 or 2 seconds then cut out, making them think that it's either broken or immobilised, either way making them leave it alone.
@born2stab Thanks mate, Yeah it definitely can get annoying! I installed it when I first bought my car in 2010, but these days it only gets used if I park in a dodgy area or I'll be be leaving the car for more than a few hours.
if one car is stolen every 4 secs... i calculated just under 8 million cars get stolen a year lol...... and some dude said only 85000 are stolen a year :S
Most professional jackers will cut the wires anyway, it's probably a better idea to install an immobiliser as they cut the power at the sources of ignition which makes it harder to just cross cut wires.
Hey guys love the show but how would I put a killswich in my 96 vs commodore an u should do some how to things on commodores an falcons I've noticed u don't really work on Aussie cars
I have a killswitch that kills the signal from the crank sensor - more effective than a starter switch (no bump-start) and low power 2mA so cheaper switch/wire needed - I also have a few red-herring switches that look obvious (actual kill switch is a pushbutton hidden in the headlining) and just turn the horn on - it's prevented it being stolen twice now, and it is piss funny to watch someone try to steal it - I leave it unlocked to prevent them bending the doors back etc. (I live in crime-city)
humm.. i really enjoy your videos but. why the starter wire. your car is a 5 speed the theft would just have it on a the on position and roll and kick start it.. i always aim for a fuel pump relay kill switch
@MrSnakeTM yeah the kick start idea makes sense, but usually a hikacker wants to get it and get out of there fast and if he turns the key (or screwdriver or whatever) and nothing happens, he's probably gonna be like 'fuck this car isnt starting' and leave.
@silvertip185 if you dont appreciate what these guys do go and watch some dickhead do it on a hiundai or sumething they are most likely more talented at this than you.... and remember this is their second episode ever so leave mcm alone
you stupid faggot cocksuckers. kill switches are the dream toy of the police.. they will kill your engine remotely then beat the fuck out of you if you havent paid your carbon taxes.. say no to this stupid butt fuckery!
@bayonetsluts Maybe, but your comment was rather amusing. Besides, If they were to have a generic remote for kill switches, you could simply remove the one you already installed. But whatever, i don't think it'll be an issue that'd pop up anytime too soon. :)
A Better switch idea is to use the switches for the hi\lo beams switch in old trucks 1975 or older. the ones on the floor board, new cars don't have this and there easy to install. you can place them up underneath the clutch pedal high up close the firewall, so it isn't accidentally tripped. when you need to start the car you just tap it with your foot to connect the circuit and just tap it again when you get out.
@jackass123455 it would be wired into the starter motor relay circuit not the actual starter motor circuit. same principal applies to the ignition barrel.
u guys should have really made a step by step video.. i cant really even catch the tools and items needed. U_U this is just like a demo video.... is there a real instructional video?
Even better just use a solenoid to cut flow to the breakline and take a full coverage policy on your insurance :P. Then you can have a good laugh when some douche takes your car for a joy ride.
this is not a bad idea, i personally have 2 killswithes on my car... thiefs have stolen my stereo with speakers & everything, even the car battery but the have never been able to driveaway with my car, so this things actually work
Just pull the damn ignition fuse in the engine bay, that way the thief would have to buy a fuse thats specially made for your car, or he wouldn't bother to steal it anyway because it will take time and money. lol.
@hayamoto If your paper clip had more than 2 points yes, but most cars have 3-16 prong fuses in the engine bay, that and you would have to bust the window, pop the hood, find the hood latch, then spend time trying to find the fuse box and the right fuse, after that s done improvise a paper clip fuse and then get in and hotwire the car, very tedious process... not worth the effort.
The way i have it set up in my car is that i have a push to on momentary switch underneath the carpet going from the positive to the ignition so that i have to hold down on the correct spot before turning the key. I'll admit however, that for the first few weeks i didn't tell my girlfriend. She would get all riled up and I'd simply blow it off as not having the "touch" when I told her, she went as red as my tool box. I proly beat the 100m sprint record that time.
i know you said it would stop you average idiot but i was just thinking you could cut the obvious not stock wire twist it together to complete the circuit and start the car and just bypass the switch all together (oops just made thieves lives easier =P)
I just fitted a fith valve controller which actuates a sewage leak into the manifolf which hydrolocks the engine, then BOOM the puss sack greanades simple but effective
nice job, you could also jsut run the switch to the fuel pump or any other crutial electrical part to your cars running, which is a bit easier than pulling the ignition barrel assembly apart
@ozzie454 thanks for the good idea ozzie that does sound easier, and no way for the dude with your ignition in his hand to see, like you would with mightycarmods idea. Im going to be leaving my car for the apalacian trail and am figuring out how to best install a killswitch
My one comment : to fool any thief, take your time to do this properly. Don't cut the cables that close to the ignition switch, but as far away from it as possible. Use the owner's manual or find a second-hand wiring loom at a junkyard for reference if necessary.
A visible fake keypad with wires that don't really go anywhere will turn their attention in the wrong direction, or discourage them from entering the car in the first place.
ok this was fun but useless if a professional thief would open you ignition (like someone did to a friend of mine) they would see 2 cables that weren't supposed to be there. leaving the easy choice: cutting the 2 wires and bypassing the Killswitch but like you said this is not to stop them. but so slow them down.
Hey mate awesome video love you stuff couple questions though, 1 is it the power wire on the ignition module that goes to on and the negative go to off? could you show us which wires you cut and where they were connected to the toggle. Regards
It is possible...If somehow you can wire the whole starting system to the switch...But that would be idiot.Then I would just need to go to your car and press the switch and I could steal it!
I remove my "ignition" and "fuel pump" fuses, then I unclip my crank angle censor, bit of a fuck around but my car is one of the most reknown to be pinched, id hate to walk back to my car park with 3 kids in tow to find two black marks on the road!
that would fuck em, but its a mission to do! Ive got an old holden commodore which is relatively easy to break into and pinch, so I remove my ignition and fuel pump fuses and put them in my wallet!
the fuse idea wouldnt work if the person trying to steel the car had half a brain just take the fuse from the head lamps or the horn and replace the fuel and ignition fuses
@edstar83 lol good idea.. kind of like burn notice when mike took the spark plug out of the thug's car to prove a point in season 2 ep 8(i love burn notice)
the only thing you have to do is rip the plastic of the steering colum and snip the wires and attach them to each other at the snipped point so current can travel stupid switch
I have found that the least visible but easily reachable position for the switch is under the gearstick gaitor. You can feel the switch but there is no way to see it.
So, the thief get's into your car, tries to start it, nothing, looks for the kill switch, finds it takes your car.. If you put it between the alternator and the battery it will still turn over, just won't start, so while the thief tries to steal your car, you'll know about it .
if you have a center mount glove box, you could put it up high, under a crease, or something like that so its hidden from sight, otherwise if you have multiple switches some where, get one that looks like those, sometimes easy is hidden :D
maybe get a switch that looks like your airvent flow switch... meaning the close open a specific vent you always use, would actually be the switch.
or a magnet controlled switch and put it underneath the cup holder, and then set a magnet there and viola.
I did that with my 94' Ford also. But (as MKUltraProject suggested), I've installed the switch in the fuel pump wiring. It has the advantage that the starter makes some noise, but the car won't start. An idiot thief will think the battery is empty or something like that (if NOTHING happens, this could be suspicious...!)
LMFAO when the Robber said "Oh YEAHH , oHHHH YEAHHH"
JamaineXD 1 week ago
Press 3 for Taradactle Egges :)
mydogzty 1 week ago in playlist Season 1
Oh yeahh. Ohhhh yeaahhhhhhhh.
RodrigoDiezBivar 1 week ago
I rigged up a kill switch in my car that's hidden in the boot, but instead of preventing ignition itself, It cuts off the power to the fuel pump in the rear of the car (mean very little wire for a would be thief to find). so if you start it, it will run for 1 or 2 seconds then cut out, making them think that it's either broken or immobilised, either way making them leave it alone.
dougaholic 2 weeks ago
@dougaholic very clever. but doesnt it annoy you that you have to go into your boot every time you want to start your car?
born2stab 2 weeks ago
@born2stab Thanks mate, Yeah it definitely can get annoying! I installed it when I first bought my car in 2010, but these days it only gets used if I park in a dodgy area or I'll be be leaving the car for more than a few hours.
dougaholic 1 week ago
his forage cap is inside out :p
Kersenblik 2 weeks ago
@lessedu Bwm??
Tcoleman821 3 weeks ago
@Tcoleman821 bmw's push button start
born2stab 2 weeks ago
if one car is stolen every 4 secs... i calculated just under 8 million cars get stolen a year lol...... and some dude said only 85000 are stolen a year :S
Dodge94z 2 months ago
@Dodge94z "-Aust Bureau of statistics" "Aust" meaning Australia thats why you got more because they were talking about only their country.
sevilla714 1 month ago
the thief sounded like moog.. XD
luqmanbmw 2 months ago
i wanna see u put this switch on a bwm..
lessedu 2 months ago
Most professional jackers will cut the wires anyway, it's probably a better idea to install an immobiliser as they cut the power at the sources of ignition which makes it harder to just cross cut wires.
Elantrix 3 months ago
Don't forget to jack up your car!
HistoryBhoy 3 months ago 31
what wire are you putting the switch in line with, one of the ignition wires, or the starter wire?
dalbaer 3 months ago
Hey guys love the show but how would I put a killswich in my 96 vs commodore an u should do some how to things on commodores an falcons I've noticed u don't really work on Aussie cars
Crazycommywagon96 3 months ago
good fucking logic 4 secs
flubkai 4 months ago
first time i;ve seen someone so happy that he couldnt start his car..2:25
andrew88ng 4 months ago
StripMaster wire strippers!
boochieboy814 4 months ago
This has been flagged as spam show
What wires do you connect to the switch?
Rodriiguesz 5 months ago
lol they would put a white man on there to talk about it he probably has never stole a car lol
troynugget 5 months ago
Put fake nos tank Make the switch say nos
BiblyMC 5 months ago 24
good to see these guys are fellow top gear fans
baseballshorty62 5 months ago
What wires do you connect to the switch?
Rodriiguesz 5 months ago
This has been flagged as spam show
best website for car insurance -buyersbrokers. info-
aldenelder635 6 months ago
This has been flagged as spam show
online car insurance quotes -- buyersbrokers .info --
curtissherman718 6 months ago
This has been flagged as spam show
best website for car insurance -buyersbrokers. info-
monicacantrell793 6 months ago
security is key, neat trick.
For more videos like this one and a community of great minds, visit ThinkStageDOTcom
DJBRKFST 6 months ago
yo i got a question... did u connect both ends to the the white/black wires. it seems like my car has the same wiring.
shsnumba51 6 months ago
I have a killswitch that kills the signal from the crank sensor - more effective than a starter switch (no bump-start) and low power 2mA so cheaper switch/wire needed - I also have a few red-herring switches that look obvious (actual kill switch is a pushbutton hidden in the headlining) and just turn the horn on - it's prevented it being stolen twice now, and it is piss funny to watch someone try to steal it - I leave it unlocked to prevent them bending the doors back etc. (I live in crime-city)
huskyemma 6 months ago
0:53.. LITTLE BASTARD ! XD
huskyemma 6 months ago
does this only work for manuals?
DarkBloodyShadow 6 months ago
what alloys do you have on the micra? looks good
socamoto 7 months ago in playlist Mighty Car Mods
Can anyone tell me what gauge wire you'd have to use?
Birdhouseboi810 7 months ago
i remember watching this episode in a few years back
xDjAsOnF 7 months ago
i got 7,884,000 cars stolen per year for once every 4 seconds?
KarstonLikesMustangs 7 months ago
humm.. i really enjoy your videos but. why the starter wire. your car is a 5 speed the theft would just have it on a the on position and roll and kick start it.. i always aim for a fuel pump relay kill switch
MrSnakeTM 7 months ago
@MrSnakeTM yeah the kick start idea makes sense, but usually a hikacker wants to get it and get out of there fast and if he turns the key (or screwdriver or whatever) and nothing happens, he's probably gonna be like 'fuck this car isnt starting' and leave.
KarstonLikesMustangs 7 months ago
"THEY SAY HE'S ..."...this is definitely from "TOP GEAR " talking about THE STIG
anasalwash 8 months ago
can you do a video on ghosting buttons for kill switches?
kebonebone 8 months ago
Good video! Helped me alot!
Coltonself1995 8 months ago
I caught the village idiot tring to steal my car at 4:30 am this morning, thanks for the video mate!
g31n3z3w5k1 9 months ago
I think they have tried to copy the stig
Jackomightyb0y 9 months ago
nice ute in the backgroung
adamshondaxl350r1985 9 months ago
Comment removed
silvertip185 10 months ago
@silvertip185 if you dont appreciate what these guys do go and watch some dickhead do it on a hiundai or sumething they are most likely more talented at this than you.... and remember this is their second episode ever so leave mcm alone
adamshondaxl350r1985 9 months ago
dont copy topgear please.
ragingLIAM 10 months ago
Woah he has the same shirt as you!
endoskeleton 10 months ago
I was thinking you could attach a kill switch to a central locking solenoid, have an extra remote and hit the kill switch when you lock the car.
jcadlols 11 months ago
you stupid faggot cocksuckers. kill switches are the dream toy of the police.. they will kill your engine remotely then beat the fuck out of you if you havent paid your carbon taxes.. say no to this stupid butt fuckery!
bayonetsluts 11 months ago
@bayonetsluts Um, right...
jcadlols 11 months ago
@jcadlols lol.. its true though.. do you think they wont have a generic remote for the cops in ten years time?
bayonetsluts 10 months ago
@bayonetsluts Maybe, but your comment was rather amusing. Besides, If they were to have a generic remote for kill switches, you could simply remove the one you already installed. But whatever, i don't think it'll be an issue that'd pop up anytime too soon. :)
jcadlols 10 months ago
The theif knows how to make a killswitch. LOL
09204418448 11 months ago
or you can buy a beamer?
angrygunsmith 11 months ago
Nice Stigism.
Trip7Jinxy 1 year ago
i will make an eject seat :D
03iamhopeless 1 year ago
pull the ecu
michaelguild13 1 year ago
@michaelguild13 most cars will work without one, they may run rich or lean but a theif can still take it
angrygunsmith 11 months ago
ok so i see you cut two wires by the ignition and u connected the white wire to your new wire do u do the same with the black wire and your new wire
aceyace21 1 year ago
so you have to turn on/off the switch everytime you get out/in of your car?
megaossim 1 year ago
hes like an Australian pirate.
insertblackname 1 year ago
if a car is stolen every 4 seconds, how is it that only 85,000 are stolen in a year?
theARMONexchange 1 year ago 79
@theARMONexchange holidays and weekends excluded ahahahah
dimsteroner 9 months ago
@theARMONexchange - some of them are returned by thieves who feel guilty after.
Parrothead69 9 months ago
@theARMONexchange not all stolen cars are reported duhhhh
mehwateva 9 months ago
@theARMONexchange some ass holes keep stealing the same cars?
crxthrasher 9 months ago
@theARMONexchange your numbers are wrong
kebonebone 8 months ago
@theARMONexchange cars are often stolen several times
michaelovitch 7 months ago
@theARMONexchange He didn't freshman year math, at least that's what I heard.
Birdhouseboi810 7 months ago
@theARMONexchange because someone is wrong
NoLifeFilmsINC 7 months ago in playlist Mighty Car Mods Season 1
@theARMONexchange it can be a minute between a car getting stolen but after the minute 50 cars can get stolen at one time
shukurgangordie 7 months ago
@theARMONexchange probably 4 seconds around the world, and 85,000 in aussie
Kegath 6 months ago
@theARMONexchange Every 4 seconds someone might witness/report a stolen vehicle.
But they might get returned really quickly. But maybe 85000 still go missing/get modded heaps and rego plate changed etc, so they go 'missing'.
RandomAwe 5 months ago
@theARMONexchange Depends on if they are successfully stolen. As in they get stolen every 4 seconds, but get caught or something.
pur99strpka 5 months ago
@theARMONexchange only 85,000 where successful, the rest got knock the fuck out
BlackSteelMamba 3 months ago
@theARMONexchange pretty sure its every 4 seconds world wide and 85000 in aus
THEAVMANN 2 months ago
@theARMONexchange google it
GOOK69er 2 months ago
@theARMONexchange maybe some are returned after they are stolen
CrazyCHikcin 2 months ago
A Better switch idea is to use the switches for the hi\lo beams switch in old trucks 1975 or older. the ones on the floor board, new cars don't have this and there easy to install. you can place them up underneath the clutch pedal high up close the firewall, so it isn't accidentally tripped. when you need to start the car you just tap it with your foot to connect the circuit and just tap it again when you get out.
Edicius101 1 year ago
@jackass123455 it would be wired into the starter motor relay circuit not the actual starter motor circuit. same principal applies to the ignition barrel.
joshw89 1 year ago
at 1:43 What kind of wire strippers are those :D i want them
AnThOnYrox8 1 year ago 11
@AnThOnYrox8 get in line mate
blueeyesseto 6 months ago
@AnThOnYrox8 they are basics tools
MrSnakeTM 5 months ago
u guys should have really made a step by step video.. i cant really even catch the tools and items needed. U_U this is just like a demo video.... is there a real instructional video?
almostcraze 1 year ago
@almostcraze if you can't realy follow what they did there i'd recomend you don't try this yourself it was very very simple
jackass123455 1 year ago
Good place to put a kill switch is to the starter motor wiring easy and the car wont start at all
21Jimmy86 1 year ago
@21Jimmy86 good luck finding a a small switch to handle the kind of amps the starter motor draws
jackass123455 1 year ago
@jackass123455 Thank you I have a switch on my starter motor and it works everyday no problems
21Jimmy86 1 year ago
you are now aware that this video is 4:20 long
markdubx 1 year ago
What kind of switch are you using? You said to use 20 amp wire because it is an ignition circuit but the highest amperage switch I can find is 5 amp
MasterTenku 1 year ago
Even better just use a solenoid to cut flow to the breakline and take a full coverage policy on your insurance :P. Then you can have a good laugh when some douche takes your car for a joy ride.
Lokivoid 1 year ago 2
@ 2:50 what was that screeching sound???
headstrong440 1 year ago
@headstrong440 serpentine belt at startup, not a big deal.
DK1LLA 1 year ago
this is not a bad idea, i personally have 2 killswithes on my car... thiefs have stolen my stereo with speakers & everything, even the car battery but the have never been able to driveaway with my car, so this things actually work
CarimboHanky 1 year ago
Alternatively, you can buy a car with a smart chip in your keys. Cross all the wores you want, ecu wont respond.
GenYShyGuy 1 year ago
other then the fuel and ignition what would also be helpful that would take time on finding the switch......
brn2blz420 1 year ago
When you extend wires like they did in this video, you should always use a relay.
JTalentsTV 1 year ago
What kind of switch is it?
I don't want to use one that to small and melt it or something lol
enigma216 1 year ago
Just pull the damn ignition fuse in the engine bay, that way the thief would have to buy a fuse thats specially made for your car, or he wouldn't bother to steal it anyway because it will take time and money. lol.
L0VEwell 1 year ago
@L0VEwell not really, a paper clip will work well enough in a fuse holder
hayamoto 1 year ago
@hayamoto If your paper clip had more than 2 points yes, but most cars have 3-16 prong fuses in the engine bay, that and you would have to bust the window, pop the hood, find the hood latch, then spend time trying to find the fuse box and the right fuse, after that s done improvise a paper clip fuse and then get in and hotwire the car, very tedious process... not worth the effort.
L0VEwell 1 year ago
@L0VEwell or two paper clips tied to gether.
hayamoto 1 year ago
OLOLOLOLOLOLOLO
Peregar4ik 1 year ago
The way i have it set up in my car is that i have a push to on momentary switch underneath the carpet going from the positive to the ignition so that i have to hold down on the correct spot before turning the key. I'll admit however, that for the first few weeks i didn't tell my girlfriend. She would get all riled up and I'd simply blow it off as not having the "touch" when I told her, she went as red as my tool box. I proly beat the 100m sprint record that time.
tobitadagon 1 year ago
i know you said it would stop you average idiot but i was just thinking you could cut the obvious not stock wire twist it together to complete the circuit and start the car and just bypass the switch all together (oops just made thieves lives easier =P)
BellRacingTeam93 1 year ago
Average idiot...fav movie- gone in 60 seconds LOL!! thats my fav too lol
DudasMiska 1 year ago
whats the gauge of that red power wire?
D15K1D 1 year ago
People love to steal big trail runner rigs (Like my '89 solid axle swapped Toyota)
Put something similar in it, no more worries about some douche bag stealing my shit anymore.
XJproto 1 year ago
@kmhanley heatshrink wrap
ThatLimitedDataGuy 2 years ago
nice... what do you call that plastic you wrap around the connectore? (heated with the lighter)
kmhanley 2 years ago
heat shrink
tyson484 1 year ago
or just insulating tape
rallyx8 1 year ago
эти парни совсем сумасшедшие)))
emvse 2 years ago
oh shit i think they put a kill switch on the bike lol i wish all the thieves were the average idiot like this guy
foreighnimport91 2 years ago
so happy to steel a car..
joaorp 2 years ago
I just fitted a fith valve controller which actuates a sewage leak into the manifolf which hydrolocks the engine, then BOOM the puss sack greanades simple but effective
vr4orce 2 years ago
me too
dmars444 2 years ago
u only put a switch in the wire that runs back too the starter?
it would work fine in a auto car but a manual a quick roll start and its going.
tassiebloke82 2 years ago 2
so attach the kill switch to operate the fuel pump. if the fuel pump doesn't run, then the engine won't run.
rtsoccerplayer 2 years ago
@tassiebloke82
lol , another funny kid that know nothing .
a normal car cant run without the key to RUN position ...
LOL !
hitachi088 1 year ago
@hitachi088
egg in ur face yet champ.
looks like u know nothing
they put the switch on the starter motor wires
not the power side of the ignition. or fuel pump.
but hey u must be another text book mechanic
tassiebloke82 1 year ago
nice job, you could also jsut run the switch to the fuel pump or any other crutial electrical part to your cars running, which is a bit easier than pulling the ignition barrel assembly apart
ozzie454 2 years ago 20
@ozzie454 thanks for the good idea ozzie that does sound easier, and no way for the dude with your ignition in his hand to see, like you would with mightycarmods idea. Im going to be leaving my car for the apalacian trail and am figuring out how to best install a killswitch
thanks again ozzie
modtwenty 1 year ago
That's exactly how I used to do it with my bikes.
My one comment : to fool any thief, take your time to do this properly. Don't cut the cables that close to the ignition switch, but as far away from it as possible. Use the owner's manual or find a second-hand wiring loom at a junkyard for reference if necessary.
A visible fake keypad with wires that don't really go anywhere will turn their attention in the wrong direction, or discourage them from entering the car in the first place.
XSaenen 2 years ago 2
Only comment is that you say "now" too many times...
theotherreviewers 2 years ago
ok this was fun but useless if a professional thief would open you ignition (like someone did to a friend of mine) they would see 2 cables that weren't supposed to be there. leaving the easy choice: cutting the 2 wires and bypassing the Killswitch but like you said this is not to stop them. but so slow them down.
Masterkrip 2 years ago
which is why you could also run your kill switch to the fuel pump the prevent this problem
ozzie454 2 years ago 2
wow super
tplo 2 years ago
Hey mate awesome video love you stuff couple questions though, 1 is it the power wire on the ignition module that goes to on and the negative go to off? could you show us which wires you cut and where they were connected to the toggle. Regards
nsanehacker420 2 years ago
every car had a different wire harness so it would be difficult to explain what wires to cut :(
Damion9393 2 years ago
u can always do what i did in my truck and wire the safety switch to the hvac lol
ravervampire 2 years ago
hae senser1080 lol ur rite u know lol if they want it they will tow it haha
havik016 2 years ago
If thieves really want it... They'll just tow it.
senser1080 2 years ago
who steals a mazda 121 and feels like he just won a million dollar is a douche bag
LancerVX 2 years ago
Would the same methord apply if installing a push to start switch?
Tolkannn 2 years ago
It is possible...If somehow you can wire the whole starting system to the switch...But that would be idiot.Then I would just need to go to your car and press the switch and I could steal it!
manafao 2 years ago
Hmm good point but I have keyless entry and start (i still have to turn a switch) so would that solve the fear of it being stolen?
Tolkannn 2 years ago
I don't think so...Keyless entry and start?I presume you have a buggy...Anyways you would rather get a killswitch then a start one!
manafao 2 years ago
how it's called name of that "cover black" you heat with the lighter?
Walterronny 2 years ago
heat shrink?
phantomloita 2 years ago
lolz on the robber
davison1021 2 years ago
I remove my "ignition" and "fuel pump" fuses, then I unclip my crank angle censor, bit of a fuck around but my car is one of the most reknown to be pinched, id hate to walk back to my car park with 3 kids in tow to find two black marks on the road!
benzjewlz 2 years ago 2
yea yea thats a good idea thanks bro
cheyene97 2 years ago
my friends old car has a kill switch in the cigarette lighter, if it isn't there the car wont start
spacequestfreak 2 years ago
pull the battery and spark plugs out and take them with you.
edstar83 2 years ago 58
lol
FrenchToastd 2 years ago 2
that would fuck em, but its a mission to do! Ive got an old holden commodore which is relatively easy to break into and pinch, so I remove my ignition and fuel pump fuses and put them in my wallet!
jewlzben 2 years ago
the fuse idea wouldnt work if the person trying to steel the car had half a brain just take the fuse from the head lamps or the horn and replace the fuel and ignition fuses
buhdanugget1 2 years ago
lol...that's a good one. i'd perfer the sparkplugs haha
genro1080 2 years ago
@edstar83 or just pull the fuses for the fuel pump or ignition system
rtsoccerplayer 1 year ago
@rtsoccerplayer True.
edstar83 1 year ago
@edstar83 Actually thinking take the engine, wheels and fuel tank incase they sniff it.
NorkiddExo 1 year ago
@NorkiddExo lol
edstar83 1 year ago
@edstar83 good one :))
madac388 1 year ago
@edstar83 Ever heard of disconnecting the fuel pump hmm and taking the battery with you
NikolaAU 1 year ago
@edstar83 lol good idea.. kind of like burn notice when mike took the spark plug out of the thug's car to prove a point in season 2 ep 8(i love burn notice)
mrjulian15 1 year ago
@edstar83 that wont stop them from taking whats inside,,,
newt20002 1 year ago
@edstar83 While that's highly effective ... Its kind of inconvenient don't you think?
VortexProducer 10 months ago
@edstar83 better yet if heres no truck switch and u need a key put it in the frreakn trunk
chamblizi 10 months ago
@chamblizi lol
edstar83 10 months ago
the only thing you have to do is rip the plastic of the steering colum and snip the wires and attach them to each other at the snipped point so current can travel stupid switch
theking8389 2 years ago
right so you didn't hear the bit where they say 'wrap and hide the wire'
grow some ears
theusualnumbers 2 years ago
neat mod
skylineracer360 2 years ago
awes vid, but id be more interested in seeing how to install a boost kill switch so noob mechanics cant thrash the shit out of my car.
CHARrrrrrrrr 3 years ago
how much it costs?? its really good or u need more proctection.wheel clamp are a godd security
neirogonzalez22 3 years ago
This comment has received too many negative votes show
kill switches are great but removing your fuel pump and ignition fuses and putting them in your wallet can be just as affective
jewlzben 2 years ago
no they could just replace the fuses with the horn or headlamp fuses so not very efferctive at all
buhdanugget1 2 years ago
lol shooooooosh.... dont want theives reading this.
jimaysmith 2 years ago
what was that wire stripper he was using at 3:08 ? where did ya get one of those
nickluke2006 3 years ago
0:38 Meow lol
john13200242 3 years ago
You know, they sell heat shrink terminals and butt connectors which are better than those cheaper ones and don't require soldering and such.
dodge69874 3 years ago
I have found that the least visible but easily reachable position for the switch is under the gearstick gaitor. You can feel the switch but there is no way to see it.
Bauksi 3 years ago
So, the thief get's into your car, tries to start it, nothing, looks for the kill switch, finds it takes your car.. If you put it between the alternator and the battery it will still turn over, just won't start, so while the thief tries to steal your car, you'll know about it .
2h7yrpp4 3 years ago
you can even put it under the bonnet in the air filter box or something
wwade2 3 years ago
Need ideas for a mounting location!!!!!!!!!!!!!
internationalnineone 3 years ago
if you have a center mount glove box, you could put it up high, under a crease, or something like that so its hidden from sight, otherwise if you have multiple switches some where, get one that looks like those, sometimes easy is hidden :D
maybe get a switch that looks like your airvent flow switch... meaning the close open a specific vent you always use, would actually be the switch.
or a magnet controlled switch and put it underneath the cup holder, and then set a magnet there and viola.
skwerl23 3 years ago
i put mine in the grab handel it took 4 ever but pretty cool place to put it
grim1128 3 years ago
I did that with my 94' Ford also. But (as MKUltraProject suggested), I've installed the switch in the fuel pump wiring. It has the advantage that the starter makes some noise, but the car won't start. An idiot thief will think the battery is empty or something like that (if NOTHING happens, this could be suspicious...!)
leckmich0815a 3 years ago
then they fuck up your starter ahhaha