RC Helicopters Beginners Guide Part 8

[nandinhoap]

god dam it need a course in Harvard to stir this control if you wanted to teach beginners should start with something simpler

[neonbluen851]

lol "we talk about those sexy curves"

[robocow2]

that servo sounds nasty!

[chubbychicken1234567]

Is there something you have to do so when you input full elevator the helicopter will just fly forwards instead actually go upside down and also when you said negative you meant when the helicopter is inverted the controls are the other way rounds in terms of lowering the helicopter would be pushing the stick up and vise versa

[MrJeff1611]

hey man can u answer this: i wanna try a 3d helli so that would be 6-7 ch but i'm not sure if i could handle it, should i buy a 6-7 ch or just stick with the 4ch ones ? i find 4 ch kinda boring so i wanna try somthing new whats your advise ?

[alishanmao]

@MrJeff1611 better to start with 4 channel, you will never be able to fly a 3D heli for more than 30 seconds before you crash it or injure yourself fatal

[gustavo8832]

Rrr

[gustavo8832]

You sound really G@y!!

[alishanmao]

@gustavo8832 well looking forward to ram your ass. Come on. I will be gentle on you first time no worries. you will enjoy it

[leefuji]

@alishanmao haha funny comment ! btw : nice 3D tweak on the Walkera 120D01 I think was it .. the one flown by the river ?

[Oooa1227]

@alishanmao lol this guy who called you gay is just a hater went to his channel and he posts gay on every video he watches he says gay so much that he is gay and you lucky son of a gun i wanna sneeze helicopters o-O

[123RITEROUND123]

@alishanmao  ioooooooooooohhhhhh ali is buff!

[bhp123654]

@gustavo8832 stfu and watch the clip without criticism

[choochinkaddywompus]

@gustavo8832 whats it to you guy, well your mother looks like my uncle steve, but I don't run my gums about now, do I fuc#in prick

[Savi141]

@gustavo8832 sounds like one of these little guys from the film Charlie and the chocolate factory

[gustavo8832]

Sorry man but ! U sound gay!! Haha

[alishanmao]

@gustavo8832 what are you waiting for, my johnny is ready and waiting for your ass.

[delsol7878]

I have been watching many of your videos and I like them!

You inspired me to purchase FPV and I did and I have the exactly the same model! Now you are making me to purchase heli and I need your advice. I'm total beginner when it comes to heli. I don't want to purchase just beginner heli. I'm looking for something that is not too big or not too small but good enough to make transition from beginner to 3D flight. What heli do you recommend? Also, I want the heli to be small enough to be portable.

[alishanmao]

@delsol7878 try some new walkera mini 3D helis :D

[stryker595]

@delsol7878 Get a Mcxp 2 its a collective pitch heli. Im actually getting mine tomorrow can't wait. Its going to be perfect for learning 3d very small light and strong.

[kokfah]

u ever thinking of flying a "jet" helicopter? it is new and i am really interested in those. nice videos by the way. :)

[kokfah]

@kokfah ooppss... i mean "jet" rc helicopter.

[daveandnikki123]

wtf is an elewaiter?

[alishanmao]

@daveandnikki123 dorks like you will never understand lol

[RcTinCan]

@daveandnikki123 And yet you use profanity.... I simply do not get children these days

[bratstarr]

@daveandnikki123 a man who gives u food in a lift :$

[Bazza019]

hi there when can you turn idle up 1 on from start or in flight

[alishanmao]

@Bazza019 yes you can but you need to carefully setup the pitch and throttle curves

[RockTouching]

What's that noise like something frigging ? Even if you don't move anything

[alishanmao]

@RockTouching those are just digital servos :)

[famasdan]

wow thats alot of info to take in, i dont have my own heli yet but its something i really wan tto get and get into soon as i can. how much dose a helicopter and control like that cost? i know its not a beginners heli but i really like the controls you show its kind of like in a video game, are there cheaper alternatives to have the same controls? I also wanted to know can you buy custom bodies for most heli's? like i could get a hind body or a apache and change them on and off?

[alishanmao]

@famasdan yes there are cheaper Transmitters too but for expensive helis like TREX600 you should go for a good transmitter. There are tons of beautiful scaled shells available in market to customize your helicopter.

[famasdan]

@alishanmao I found some kits that are arf its like the main frame chasis of the trex 450 in carbon fiber it doesn't have the servos or electronics in it i don't think but they are like $95 dp you think that is a good price as a project over time or where is the best place to get one? thank you for the previous response , thanks to your videos i have learned alot in just a day.

[alishanmao]

@famasdan only TREX450 kit in 95$ should be an ok price. but if you go for a TREX Clone you might be able to get an ARF with electronics in same amount :D

[famasdan]

@alishanmao that dosent sound bad i have seen how cheap they go for, seems good... cant wait much thanks.

[gizzle7445]

hey, what video software u have.. pretty cool affects

[alishanmao]

@gizzle7445 PD8 Ultra

[feldmuis]

well i have experienced the effect of putting helicopter in 3d with speed stick down .

it went 100% downwards (if i have this richt) and main gear was busted

my friend at work loked at it and switched the switch xd

also my falt for not telling him so i dont blame him

[NETWizzJbirk]

Ali, Nice Cat; Meow :-)

I found out the DX7 EU is the Europe edition, & it has less radio output and range than the US edition.

[alishanmao]

@NETWizzJbirk Arrggh really? I am gonna keep my planes and helis under 600 meters :D

[NETWizzJbirk]

@alishanmao Serch the Internet i.e. Google for DX7 vs DX7EU.  I found someone that the number 950 meters was quoted for the EU (Europe) and 1600 meters for the DX7 (no letters) US version due to the legislation by the European Union. Really, I think you should just buy a US edition next time because it is doubtful anyone will ever check compliance.

[alishanmao]

@NETWizzJbirk ooops 950 meters only :) well i fly mostly 600 meters, not more than that.

[djmedic2008]

BAHHAHAHAHA!!! THAT SNEEZE AWESOME!! Great editing

[holodad]

Hi Ali

Thanks for this great video. I fallow all you videos in general but this last one regarding the TX/RX is very good. I'am starting RC heli and i'am currently setting up a Futaba 6EX with my 450 TREX

I discovered all this by myself but it's very good to get a confirmation from you

Thx a lot

[alishanmao]

@holodad welcome. if you have some confusion feel free to contact me. I do own Futaba 6EXAP not the heli one but had a Futaba 7CAP for helis

[holodad]

@alishanmao thanks a lot Ali

Actually, since i saw a lot of posts/advices regarding this, i just changed my Radio system. I sold out my 6EX 2.4Ghz and got a Spektrum DX6i... I will try all the setup and hope everything goes fine. If needed, i will drop you a small question. Thx again

[poerik]

i hear a servo search for it's zero point it's dying slowly ali

nice serie i learned some things thkss

grtzz

[alishanmao]

@poerik thanks for comment mate. and welcome

[thefirstofmykind]

i think your vids are helpful, how are you liking the align? and drago?

[alishanmao]

@thefirstofmykind drago was good. but Align of course is pro stuff. I am loving the quality and performance of Align. Next thing TREX 700E in my list :D

[thefirstofmykind]

@alishanmao hehe nice man, i have a copterx myself (drago) hehe i like it it flies now, im at skills now where you were when you were all into your HBK3 hehe had that one too, i want to get a 450 trex align. when you get your 700 will you a description video?? thanks dude, have a productive week, peace

[alishanmao]

@thefirstofmykind sure will do