Im thinking of incorporation what you did with the project box and LED's into a potato cannon, with a stun gun as a power source. If it works, it should be awesome!
Cheap easy way to do this that I figured out when I was 10 y/o was with BOTTLE ROCKETS and PVC pipe. Good project but not for the faint of heart. If you just want a quick disposable way to do this try my idea? ;-)
Kick ass shoulder cannon i have one kind of the same but a bit bigger and the rockets i use are thin pieces of metal formed to a rocket shape with m80's at the end for the boom effect lol
Actually, like real rocket launchers; the rockets' fins are angled slightly so it spins during flight. The spinning would cause the spastic flight pattern you mentioned to stop. Also the spinning would also give the rocket more accuracy.
What kind of rocket did you have before you modified it? Just wondering if I can get a rocket at the hobby store and turn it into one like yours, or if i have to make one completely from scratch.
hahaha that is AWESOME when i saw the first shot i was like dam its just one of these crappy designs and was about to move on to a different vid until i saw you second shot i was like YES FINALLY a rocket launcher that actually works!!!! thanks for the tip on the guide rails awesome video you just got your self a subscriber!
One thing you could do to save some money just take apart the launcher box from a model rocket launcher and attach that to a PVC pipe and wire LEDS and buzzer to it :D
This design wastes a lot of energy that could otherwise be used to propel the rocket. If you want to really get some umph out of a shoulder fired model rocket, look into piston launchers and rail guidance. Not much more difficult or expensive to build and will outperform most other launch systems. Not hating; this is a cool set-up. Just has room for improvement. :-)
Very clever way of preventing yaw in the barrel. I hadn't thought of that. One approach I've had success with is mocking the shape of a bazooka round, they are as wide at the nose as fins are on the rear with the cg being forward. You have to make sure you have enough drag on the rear to compensate (typically done with velocity). And enfantcool, this is nothing close to an AT-4. Military style rockets are more similar to recoiless launchers.
I would make a bunch of cheap rockets out of PVC or something, but they would have an explosive charge on the end. Then I would shoot it at cars or something.
shit make the launcher but add some from shields to protect your face and extend it just a tad bit more in the back to make sure you don't catch your shoulder on fire and it should work perfectly i have something similar except mine shoots the aritilary shell fireworks bitch is a blast as soon as i get a video camera i will post some videos
I NEED TO KNOW WHAT SUPPLIES I NEED, HOW TO MAKE IT AND WHERE TO GET THE SUPPLIES. PERSONAL MESSAGE ME. I DON'T WANT TO FIRE IT JUST SHOW IT TO MY FREINDS. IF YOU CAN TELL ME I WILL SUBSCRIBE.
Just get the launch tube for fireworks and glue it to the inside of some white plastic building pipe and shoot firework rockets out that actualy go bang.
forget the wires on the front, just take some styrofoam <-(or whatever it is called in US) and make a shell, 6 inches long, cut it in half after you cut a hole 4 the rocket
this big problem with most videos i see here people make rocket launchers look cool but the rocket does nothing it just flys out and nothing it does explode it does make a giant cloud of smoke it just flys out, but my rockets were designed to take out small sized houses and cars.
Dude! That is awesome me and my freibd made one that shots artillery shells and if we want a baseball but it's nothing like that when we get more artillery shells we will make a video of it cuz we have one but it's to dark to see it launch but it works pretty good. It's suprising what you can do with simple things like pipping and duct tape
Well done on the rocket launcher man, can you tell me though how the ignition system works, preferably with a video tutorial, but failing that an explanation will do so it will, and you need not worry its for a school project not for nothing illegal or anything like that, perish the thought, thanks in advance...
btw firing 1/2" kno3 rockets out of a 1" pipe is tons more fun...put a second fuse that leads to the endcap and have 2oz. of gasoline in a plastic baggie
im building a 200ft tall death canon like a giant ass moater and im using 1000gals of Hydrogen gas to launch the 1ton iron projectile...lol of coarse im not :P but imagine if i did xD
Outfreakin'standing! That's good old American ingenuity, there! Say, when you launch that thing, how much of the back-blast do you feel? Ever consider installing a shield on the front between your face and the muzzle?
lol i like his advices "dont do this at home... "i probably shouldnt have fired if from my shoulder but i did and it was alot of fun!" hahahaha.... and like and ironic DONT DO THIS AT HOME let the fun for me XDD
It probably wouldn't be as fun, but you could use an actual estes launch controller and mount it to the handle. Not as bad-ass though. On a side not, this is how Imma spend my summer!
Now you need to move up to F class motors and higher. I've been making my own G class (and higher) for years, but you can buy F class at most hobby shops.
dude awesome video is there any way u could do a more detailed video on how u actually construct the launcher if u did it would be greatly appreciated
And none of them are hated terrorists blah blah balh channel taken away. No none of that has happened. I just think its very cool what you did and you should be showing how to make it to the rest of us, and if you do you will be not hated but liked a lot and will get much more channel and video views.
ok first of all you should just chill out theres tons of people on youtube who have put instructional videos on things worse, way worse than this. Ill send you links of them if you dont believe me.
hey man can you please either put an instructional video on youtube for all of us or send me instructions on how to make it. I really want to know how to make it Its so cool, Great Job btw! How are you igniting the rocket?
I know they at least have model rocket engines online, but how does he like i guess, its wiring through everything, i just wanna know how it works, how is he wiring to the igniter and stuff?
man i love ur missil launcher very very impressive and very cooooool can you tell me how to make the rocket ?? i am gonna try to make my own one lol please tell me how to do it and thnx
this is my bestest friend jairus... miss these days brother
HeartAE86 3 weeks ago
Might need the prints for that puppy soon if Ron Paul don't win lol
SMASHER1099 2 months ago
Dope as hell!
Stoned483 2 months ago
Nice Job! If you wanted to you could put a payload consisting of flash powder and gravel for an impact explosion.
badmf13 2 months ago
I would put fireworks in it and shoot them out hahah
TheCrispyShow 3 months ago
your house is so clean
Incrue 3 months ago
Im thinking of incorporation what you did with the project box and LED's into a potato cannon, with a stun gun as a power source. If it works, it should be awesome!
mmknope 4 months ago
I think you can expect a visit from the CIA very soon...
warriors156 5 months ago
@warriors156 I think whoever tried walking in the kitchen at 1:20 was homeland security lol
pinmedownbaby 1 month ago
i like the rocket but wouldnt an IED just pay off as much
warriorxp111 5 months ago
Cheap easy way to do this that I figured out when I was 10 y/o was with BOTTLE ROCKETS and PVC pipe. Good project but not for the faint of heart. If you just want a quick disposable way to do this try my idea? ;-)
tom97031 6 months ago
its very cool but i want to see something with more power, think you should go with a E rocket instead.
brandonhughes7 6 months ago
thats awesome
physcosykes 6 months ago
What's the name of the song at the end?
MechaRogers 7 months ago
one word
blueprints
herpfreakuk 7 months ago
Dude has way to much time on his hands lol
davidmartling 7 months ago
"don't try this at home" guess what you just did.
Trentonater47 7 months ago
But will it Blend?
TboltHurricane 7 months ago
How much power is required to lite the fuse?
TboltHurricane 7 months ago
Kick ass shoulder cannon i have one kind of the same but a bit bigger and the rockets i use are thin pieces of metal formed to a rocket shape with m80's at the end for the boom effect lol
darkpaladin6662001 7 months ago
nice launcher
Thefunnydudes100 7 months ago
very super frickin' cool. and i dont care wht you say im making one.
iam732rock 8 months ago
Awsome dude
aclockwork1971 8 months ago
vid to how to make this? :D
Tin200 8 months ago
THUMBS UP IF YOU THINK ITS RETARDED TO TELL PEOPLE TO THUMBS UP
cmeron45654 8 months ago
could you teach us step by step how to make it. it would make a great video lots of views.
jokerjosh3 8 months ago
nice &cool
sh3ifan 9 months ago
That was soo cool
lego0931 9 months ago
Actually, like real rocket launchers; the rockets' fins are angled slightly so it spins during flight. The spinning would cause the spastic flight pattern you mentioned to stop. Also the spinning would also give the rocket more accuracy.
EagleEye1251 9 months ago
I wonder if ill get thumbs up for no reason?
TheSoonerfan444 9 months ago
Can I ask, What is so dangerous about this??
lukewilliams1995 9 months ago
What kind of rocket did you have before you modified it? Just wondering if I can get a rocket at the hobby store and turn it into one like yours, or if i have to make one completely from scratch.
lucasprocee 9 months ago
thumbs up if you saw the bullet before he showed you it
zatajena7 9 months ago
Can you send me the instructions to build it at kaelan246@yahoo.com
Thanks
kaelan102 9 months ago
This has been flagged as spam show
Can you send me the written out instructions at:
vectorprime95@hotmail.com
138jhardy 9 months ago
im still making it
holdenm1244 10 months ago
nice house you got there
HyperFireworks 10 months ago
this is what u should do, put some dynamite inside da rocket and u got a rocket that could take down a plane
takaKizne007 10 months ago
hahaha that is AWESOME when i saw the first shot i was like dam its just one of these crappy designs and was about to move on to a different vid until i saw you second shot i was like YES FINALLY a rocket launcher that actually works!!!! thanks for the tip on the guide rails awesome video you just got your self a subscriber!
htkendall 10 months ago
One thing you could do to save some money just take apart the launcher box from a model rocket launcher and attach that to a PVC pipe and wire LEDS and buzzer to it :D
AirsoftIdiot23 10 months ago
This design wastes a lot of energy that could otherwise be used to propel the rocket. If you want to really get some umph out of a shoulder fired model rocket, look into piston launchers and rail guidance. Not much more difficult or expensive to build and will outperform most other launch systems. Not hating; this is a cool set-up. Just has room for improvement. :-)
CorruptReverend 10 months ago
Comment removed
CorruptReverend 10 months ago
Nice, if you hate people that say "I want 5 minutes of my life back" thumbs up!
Fireisfun97 11 months ago 13
If you put a few grams of quality flash pwder in with the ejection charge.... DAMN!!!
donpepe836 11 months ago
"I prolly shouldn't have done it, i prolly shouldn't have fired it from my shoulder, but i did and it was fun" haha
makeshiftskiier4 11 months ago
if you really want to have some fun, in the egection charge put fireworks in there
Spicyperson9123 1 year ago
wonder how a "SABOT" type system would work... i'd love to see some kind of guidance too..
Munky332 1 year ago
Dude i just gotta say....that is freaking awesome...How much did it cost to biuld it?
beetleboy96 1 year ago
@beetleboy96 a i built mine for around 30 40 dollars but i already had a tube
weoponlover 11 months ago
This has been flagged as spam show
@TrueHeartHero
i agree
Blitzerjunge 1 year ago
@TrueHeartHero
i agree
Blitzerjunge 1 year ago
that is so freaking awesome
antMANscochiey 1 year ago
telling us NOT to makes it even FUNNER!
geckoboy222 1 year ago
so how long u been muslem
drunkensmiley 1 year ago
can i put explosives in it?
deathproof97 1 year ago
This has been flagged as spam show
1) Hold your breath.
2) Copy all of these steps.
3) Go to two other video.
4) Paste it in the comments.
If you can do all of this without breathing you're a good pot smoker
nami5555 1 year ago
Very clever way of preventing yaw in the barrel. I hadn't thought of that. One approach I've had success with is mocking the shape of a bazooka round, they are as wide at the nose as fins are on the rear with the cg being forward. You have to make sure you have enough drag on the rear to compensate (typically done with velocity). And enfantcool, this is nothing close to an AT-4. Military style rockets are more similar to recoiless launchers.
shob77 1 year ago
I would make a bunch of cheap rockets out of PVC or something, but they would have an explosive charge on the end. Then I would shoot it at cars or something.
SkyePyro 1 year ago
is there anyway you could send me a list of materiALS and how to assemble it
xhxBOOMxix 1 year ago
lmao " Don't do it....It's a lot of fun " :)
freakiefilms 1 year ago
shit make the launcher but add some from shields to protect your face and extend it just a tad bit more in the back to make sure you don't catch your shoulder on fire and it should work perfectly i have something similar except mine shoots the aritilary shell fireworks bitch is a blast as soon as i get a video camera i will post some videos
xXPvtParts50Xx 1 year ago
add a gunpowder charge and u got a fully functional espionage/terrorist weapon
Mrjameslat 1 year ago
Soldier 1: Enemy Tank!
Soldier 2: Pvt. Allen, use your Estes PVC rocket launcher to take it down!
Pvt. Allen: Ok! *beep* *Fires rocket* *hits the tank, rocket falls, gets ran over* *little parachute flys out*
Soldier 1: Well were screwed... -.-,
ipwnuall2 1 year ago 8
Next thing u know, the military pounds down your door with a battering ram and raids your house
HedgehogStudios1 1 year ago
I NEED TO KNOW WHAT SUPPLIES I NEED, HOW TO MAKE IT AND WHERE TO GET THE SUPPLIES. PERSONAL MESSAGE ME. I DON'T WANT TO FIRE IT JUST SHOW IT TO MY FREINDS. IF YOU CAN TELL ME I WILL SUBSCRIBE.
therealme3333 1 year ago
can you send me a personal message with the materials i need to make this?
cienaga1000 1 year ago
Just get the launch tube for fireworks and glue it to the inside of some white plastic building pipe and shoot firework rockets out that actualy go bang.
hoboman8 1 year ago
forget the wires on the front, just take some styrofoam <-(or whatever it is called in US) and make a shell, 6 inches long, cut it in half after you cut a hole 4 the rocket
ThePatrickOliver 1 year ago
it needs sights
truestyleoutlaw 1 year ago
this big problem with most videos i see here people make rocket launchers look cool but the rocket does nothing it just flys out and nothing it does explode it does make a giant cloud of smoke it just flys out, but my rockets were designed to take out small sized houses and cars.
Nabiyur 1 year ago
That's awsome!
Batchelli 1 year ago
Dude! That is awesome me and my freibd made one that shots artillery shells and if we want a baseball but it's nothing like that when we get more artillery shells we will make a video of it cuz we have one but it's to dark to see it launch but it works pretty good. It's suprising what you can do with simple things like pipping and duct tape
ledgen95 1 year ago
can u plzzzz make a video showing the circut of the part that lits the rocket
trx450rshow 1 year ago
Well done on the rocket launcher man, can you tell me though how the ignition system works, preferably with a video tutorial, but failing that an explanation will do so it will, and you need not worry its for a school project not for nothing illegal or anything like that, perish the thought, thanks in advance...
SeamusOLepreachaun 1 year ago
Dam billed weapons for the military they'd love ur dizing
elton5519321 1 year ago
Sweet, wonder if I can make one that fires mortar rounds
Cityj0hn 1 year ago
wow, you've done a really nice job of making this, nice work! :)
SlashAndBurn666 1 year ago
I am telling you....
DON'T do this at home
DON'T even build it
But this thing is SO MUCH FUN
rofl
btw firing 1/2" kno3 rockets out of a 1" pipe is tons more fun...put a second fuse that leads to the endcap and have 2oz. of gasoline in a plastic baggie
THAT'S intense.
medaman103 1 year ago
im building a 200ft tall death canon like a giant ass moater and im using 1000gals of Hydrogen gas to launch the 1ton iron projectile...lol of coarse im not :P but imagine if i did xD
tjinga2u1 1 year ago
please market this or get someone else to do it so i dont have to make this XD
BitOveRate 1 year ago
how much does it cost to produce this rocket????
plzzz telll meee.... =DDDDDDDDDD OMGGG i so want this rocketttttt
mehrong69 1 year ago
@mehrong69 under 75 bucks. all you really need is a model rocket kit with an included detonator, and some pvc pipe...
yomommasooofat 1 year ago
the speaker is annoying
thefarmer32 1 year ago
Dude, you should patent that and sell it at walmart or something I would be the first to buy it
Supadman72 1 year ago
damnnnn thats awesome xD lmfao
matthlikestoskate 1 year ago
Nicely done!
Johannesmostert 1 year ago
i give you mega props for this video your not to quiet or to loud and you know what your talking about congrats
franczyk94 1 year ago
lol i'd hate to be that guy at 1:20 that walked into the back of a real rocket launcher firing. =D
9DragonMaster 1 year ago
Outfreakin'standing! That's good old American ingenuity, there! Say, when you launch that thing, how much of the back-blast do you feel? Ever consider installing a shield on the front between your face and the muzzle?
AffectionateDan 1 year ago
holy crap thats amazing
pommyboyinoz 1 year ago
Great video , awesome rocket!
Sprinterdrift 1 year ago
"Nice" shot at the beginning XD
cod007skilldfan 1 year ago
Can you post a shcematic for the wiring you used to make it?
MAHONAPRODUCTIONS 1 year ago
this is amazing you are so talened i wiould not be able to withstand all the problems and bugs that where found during this project. wow
br4nd0n136 1 year ago
just to let you know you should get closer to the handel not to the end you wont burn your hair off if you do this.
ironfist4u1 1 year ago
Dream Dad hahaha
TheSplatter21 1 year ago
Rofl!!! XD bounce rocket FTW!
Kage999 1 year ago
haha look at the camera not at the screen with ur face on it.
cyrus987987 1 year ago
man great idea that is amazing how long did it take to build love the sound and speaker keep up the good work
LRE96 1 year ago
AWESOME VID! Finally someone knows how to build a PROPER rocket launcher! lol the first rocket test was like a javelan!
DORC101 1 year ago
thank you very much
TheAdventuresOfQuinn 1 year ago
i love how he tells every1 how to make it....THEN tells us not to build it...
123414life 1 year ago 41
hey could you PLEASE send a list of what you used to make the rocket and launcher to patrickfairbairn@yahoo.com thx
thatwierdkiduknow 1 year ago
lol i like his advices "dont do this at home... "i probably shouldnt have fired if from my shoulder but i did and it was alot of fun!" hahahaha.... and like and ironic DONT DO THIS AT HOME let the fun for me XDD
squallgf88 1 year ago
It probably wouldn't be as fun, but you could use an actual estes launch controller and mount it to the handle. Not as bad-ass though. On a side not, this is how Imma spend my summer!
MALLEUSDOMINUS 1 year ago
thats so cool!!!
tordvillegas 1 year ago
how much would you be willing to be sell one launcher and three rockets
damnitstakenfilms 1 year ago
oh my lord?? lol just swear
dont do this at home??? ya right because someone looking this up isnt going to
do this haha
basoboii 1 year ago
Also, can you show us how the wiring is set up on your rocket launcher? It would take a lot of stress off the project if i knew how to do it.
EagleEye1251 1 year ago
imma make me 1
2Up2DownTV 1 year ago
how much money do u spend into this projekt?
Konsolenrocker08 1 year ago
Awesome, now make a real missile.
KlTTYFAT 1 year ago
i will buy it from u!!!!!!!!!!!!!!!!!!!!!!!!!!!!
dodgeman341 1 year ago
I made one exactly like this except mine was black looks almost identical great video
fnd1220 1 year ago
you probably should put a baloon full of oxy/acetylene inside the rocket tube, the parachute ejection blast will provide a very satisfying BOOM!
mikerstew 1 year ago
I was hoping you'd blow a hole through your wall @ 1:08. That would have been bad ass.
fasle2 1 year ago
thats amazing nice job
drumline064 1 year ago
does the PVC show any signs of melting
serasfan666 1 year ago
Can you make one for me? I wanna buy one!
parmalat1184 1 year ago 5
make a tut.. so i can do make the same thing...
guyinheart 1 year ago 3
that soldier is a spy!
TheMgStudios 1 year ago
hahaha in slow mo it sounds so reall
scootermaniaman 1 year ago
nice VID
thatsnotmyleg 1 year ago
that is awesome as shit. i jizzed alittle in my pants
950rpm 1 year ago
oh shi-
you recruitin?
3DGiggity300 1 year ago
Gr8 man .... good work..
aspdeepak4yt 1 year ago
whats the song?
seagullssuck2 1 year ago
is this guy was brown... he would be in jail for doing this LOL
penguin422 1 year ago
Now you need to move up to F class motors and higher. I've been making my own G class (and higher) for years, but you can buy F class at most hobby shops.
bamboo4tameshigiri 1 year ago
its easy . and nice
BorgPaul 1 year ago
dude awesome video is there any way u could do a more detailed video on how u actually construct the launcher if u did it would be greatly appreciated
jakemusicman.
jakeman121acdc 1 year ago
how about sharing those building plans ( actually i just need the speaker, relay and l.e.d. part ) ....... looks like fun!!!!
mybiz42 1 year ago
What was the name of the song in the end?
RayJtheFilipino 1 year ago
0:30 "And i just bought a Cat for the End"
Haha, I was hoping he'd be aiming for it, But not actually kill a Cat.
PharsaNets 1 year ago
0:30 "And i just bought a Cat for the End"
Haha, I was hoping he'd be aiming for it, But not actually kill a Cat.
PharsaNets 1 year ago
This sort of thing is what will cause congressmen to want to ban model rockets. One person screwing it up for thousands...
bigone5500 1 year ago
That looks great
RssMMA 1 year ago
damn...so much fun u can do out there in the country...if thats where u at rite? lol
aK47yeahnigga 2 years ago
this is very cool. And youre a pretty good speaker, most people mess up when they try to say things. 5 out of 5.
mmknope 2 years ago
i just love do it yourself stuff and this really takes the cake beside a homemade tank for paintball
ARKSOLDIER7 2 years ago
That is the most badass, fucked up thing Ive ever seen.
marsh1044 2 years ago
this is the only well-made launcher on youtube. im currently making one and hope it turns out this good
MechInvent 2 years ago
This has been flagged as spam show
is there anyway you can send me the schematics ? thanks
XxorcraiserxX 2 years ago
And none of them are hated terrorists blah blah balh channel taken away. No none of that has happened. I just think its very cool what you did and you should be showing how to make it to the rest of us, and if you do you will be not hated but liked a lot and will get much more channel and video views.
dylanchillin77 2 years ago
ok first of all you should just chill out theres tons of people on youtube who have put instructional videos on things worse, way worse than this. Ill send you links of them if you dont believe me.
dylanchillin77 2 years ago
u should put a warhead on it so it gos boom
ntbmxman 2 years ago
hey man can you please either put an instructional video on youtube for all of us or send me instructions on how to make it. I really want to know how to make it Its so cool, Great Job btw! How are you igniting the rocket?
dylanchillin77 2 years ago
@dylanchillin77 walmart rocket engines? if they still have them
akshooter762 2 years ago
I know they at least have model rocket engines online, but how does he like i guess, its wiring through everything, i just wanna know how it works, how is he wiring to the igniter and stuff?
dylanchillin77 2 years ago
Sure that the launcher are homemade? Looks like you have stolen it from the Army!
cheeznutmaker 2 years ago
@cheeznutmaker army rockets are way more sophisticated than that
enfantcool 1 year ago
@enfantcool, No Shit Shurlock, Btw This Dude Is Not in the Military, Jeeeez...
Trooper300 1 year ago
@Trooper300 dude cant you read the comment im responding too before dissing mine?
enfantcool 1 year ago
@Trooper300, Hmm Fair Enough ...
Trooper300 1 year ago
@enfantcool Actually thats pretty damn close to an AT4 just got to add a war head on the end of that rocket
SMASHER1099 1 year ago 10
@SMASHER1099 So very true the only plus to this over an M136 AT4 is that this one is reuseable
Darkklown86 1 year ago
that was brilliant. well made rocket, well made video, 12 out of 10
DistrustingToaster 2 years ago 25
idiot. That things awesome (Y)
CR0SBO 2 years ago
O_O that... was... AWESOME!!!
Too bad you didn't show us how to make it :(
xXbrokenvoidXx 2 years ago
should have used 2 stage rocket motor and put a charge so it actually blew up, neat but no bang baby
katskratchkustumz 2 years ago
that.......was....... AWESOME!
WizzyFilms 2 years ago
AWESOME please send me step by step ill make one not take credit thanks Freggin awesome man !!!!!!!!!!!1
BuckeyeNation22 2 years ago
i need an instructable step by step... where can i find 1?
turkd13 2 years ago
Nobody knows the song at the end?!
PLSSSSSS tell me
OnkelzF4n 2 years ago
we share the same idea, but I'm kind of young so I dont go into too much technology. Just physics. But thanks for some better designs.
Jeeeewce 2 years ago
Dude what state u at. Then I pay u money to make one. And u test it.
TheGameReapers 2 years ago
o hey it's the motorcycle-mounted rocket salvo guy
pillowby 2 years ago
Nice Vid.
One question.
Whats the name of the song which is played from 03:30 till the end?
OnkelzF4n 2 years ago
Suspects, alibis, and partners and crime by chasing victory
BiGoDeLsKi 2 years ago
Shit man thats insane i tried this with a small firework and a bit of pipe, was hialrious. But this is the real deal, grats man
TheSmok3yJoe 2 years ago
@fixdeluxe1 thanks man
this owns!
Mithrite1 2 years ago
awesome 5 stars. Shouldn't have made it? You should have made it and you did make it so thumbs up!
grannman 2 years ago
That's awesome,I am going to try myself.
fixdeluxe1 2 years ago
@fixdeluxe1, what a cool video. Thanks for sending it to me.
grannman 2 years ago
man i love ur missil launcher very very impressive and very cooooool can you tell me how to make the rocket ?? i am gonna try to make my own one lol please tell me how to do it and thnx
1974888 2 years ago