Added: 3 years ago
From: AirsoftHawaii09
Views: 27,423
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (80)

Sign In or Sign Up now to post a comment!
  • Yeah I bought this rifle and it does not shoot very far. I got it from Airsoft G.I for $240. Now I dont know if it could be the bbs that I`am using or the gun itself.

  • @robbysharolaid check your hop up

  • What is spr mean

  • @dylanmorales45 special purpose rifle

  • can you change the rail system that it has on to say just one long 4 sided rail system?

  • What type of battery are you using because the battery that came with the gun won't fit into the stock properly?

  • just curious with the 9.6 volt wat is the rate of fire? and is it lipo-ready?

    thanks looks sick!

  • what kind of red dot?scope is that? is i something like this:

    thanks

  • i plan on buying this gun at some point but until then i use a L96 sniper rifle and a M4A1 i only use for CQB

  • wait its compartment holds 3 cells with 1 in the buffer tube MAX? thats pretty small............

  • Comment removed

  • thats a mod 0, mod 1 is for navy and mod 0 is for army.

  • Is it accurate? Like, does it have hop-up?

  • What type of battery are you using?

  • Finger off the trigger, mister pro.

  • scope looks nice but sr25 is better than that i bet....

  • TWO DIFFERNT purpose gun sr25 is a sniper rifle this one is for cqb

  • an SPR is not ment for CQB...

  • the one i hav a 11 inch barrel not much for a snpr mine for cqb it still is very accurate 7 yard full auto 2inch circle 50 round

  • i'm talking real guns...

    an mk12 mod1/0 SPR is a 'snipers' rifle that can doubble as a carbine if needed, but by no means is it for CQB.

  • @CPLBSS88 whats it s ment for then i works fine for me in power edge cqb

  • sr-25 = DMR Designated Marksmen Rifle

    SPR = Special Purpose Rifle

  • 450 fps with special bbs full metal takes almost all m4 mags like tokyo marui and such.

  • can you use m4 mags?

  • yup but get the hi cap a&k mag 450round

  • that gun makes a great DMR

  • isnt that a spc?

  • Don't keep your finger rested on the trigger, bad habit.

  • What is the brand/make/model/spec of the scope used and is it magnified?

  • i had this gun and i upgraded to a 10.8v battery and it is awesome only bad thing is that battery that big can get stuck and break if not careful (trust me i no^-^; )

  • i bought my m4 spr here in cebu phil. at justin..before i bought we test it..in semi it reach 210fps & in automatic it reach 220-230..i never change anything yet like the battery..they said battery change the ROF.

    anyone has already modify their m4 spr?..

  • does it inculde a charger?

  • duh

  • Most higher-end guns don't come with chargers or batteries.

  • Oh, well when you put it that way, yes. But still, duh lol.

  • wow I thought the spr was longer than that. I must be stupid

  • no your right the spr is the m16 modded into a presision rifle this is like an m4

  • the SPR MOD 0 is longer

  • SPR doesnt mean its sniper,its a Special Purpose Rifle,That is the carbine version

  • i know. but as far as airsoft goes, it makes a good sniper.

  • Yeah dude you're thinking of the M16 SPR and BOTH MOD.0 and MOD.1 are long, this is an M4 w/ SPR style floating handguard.

  • i want it!!

  • can you make the ris longer on the bottom?

  • what tyoe of scope is that again?

  • I got one here and it has a 130 spring and we calculate somewhere between more than 430 fps with .20 We got a M4 Echo1 chronoed at airsoftgi before shipping with 390 fps with .20 and the A&K was shooting stronger than Echo 1. There was a huge difference

  • What do you mean 380 fps with .20g bbs

    I chronoed it (gun is from Evike) it was 400 fps with .25g bbs.

    Its very acurate for a stock gun.

    I was owning everyone at the skirmish during saturday. Really great gun for its price.

  • Nah, Trust me. The FPS will steetle down, Theres not way it can be 400FPs with .25g bbs..

  • I bought mine at evike, you bought yours somewhere else,I fired my gun with about 5000 rounds, its equiped with a m130 (450 fps with .2g bbs) spring. Maybe the store you bought it from downgraded your gun. Every one who bought it from the evike store said it is 450 fps with .2g bbs.

  • @AirsoftHawaii09 how do you get silencer on? the screw on my orange is impossible t unscrew.

  • @AirsoftHawaii09 my gun has 430 fps with .20 and about 400 with .25 but mine is very powerful lol

  • @AirsoftHawaii09 ya mine was shooting 450 stock with 2g

  • You shoulda got a utg tactedge(scope) for that baby i got the same gun with the and mine in my opinion looks 3 times better.

  • stick with your ca m15a4 carbine sportsline, and buy a metal body 1airplane21.

  • how much fps does it have?

  • Watch the whole video before you comment and then you'd know.

  • What kind is the scope is and how much are they?

  • Is it made of pot metal or is it good?

  • this m4 is no joke i have it and it rocks

  • I was thinking about getting this. Is the metal pot metal, or is it good?

  • Which gun do you think I shuld go with, the new A&K spr mod 0 or the Echo1 m14 ris sniper (I will be using these for very long range/sniper). Please respond to this on my account page.

  • If you get an M14, I suggest going with the CM.032. It is much better than he Echo-1 version and has a tightbore barrel pre-installed!

  • im pretty sure you can but you would also need to upgrade the internals even farther then they are now which would cost me more so thanks thats what i thought would happen but i just was making sure i might actually do that onc ei get enough money

  • Total, I am guessing it would cost upwards to $400-$500 just to get all of the needed re-enforcements.

  • how much did this gun cost should i get this gun or stick with my ca m15a4 carbine sportsline

  • what kind o connector do you need for the crane stock battery and should i get the full stock or crane stock

  • @AirsoftHawaii09 If you don't care about RPS then all you need to upgrade that gun to shoot over 400 FPS with .25's is an M125 spring and possibly a high torque motor. So 50$ total

  • isnt this gun the mod 0 and the longer (sniper one is mod 1) and where di you get yours off of and idk if you would know but can you upgrade this to the m160 systama spring???

  • No, no.. This is the MOD 1. :D

    There is no AEG around that can ever handle a M160 stocked.. It will just implode on itself.. stupid idea.. [no offence]

  • Does any1 know the internals on this gun if there high quality or crap. Because a&k doesn't have the best rep /w their AEG's and for 200+ dollars i would like to get my money's worth. Also what is the real fps?

  • this gun has a reinforced steel gearset, its pretty decent

  • also the barrell is a 6.02mm bore, which as standard is amazing, even most upgrade barrells are only 6.03, hence its accuracy despite being short as mentioned.

    id want to put a 9.6v battery in it to beef its output up a little more, which i will do soon.

  • You said its pretty accurate for the barrel length.. Actually, if its over 25cm long, and you change 50cm barrel to it, its not going to make it more accurate. I've seen some tests, that proove that 25cm barrel is as accurate as 50cm barrel in the same gun. It sounds weird, but its true. In real firearms it helps, but not in airsoft guns, because of that there is no grooves in the barrel and bb has some room to move sideways inside the barrel.

  • Yeah, Thats becuse if your barrel is that long, There is a vacume effect. Thats why most AEG's with barrels that long need Bore up kits.

    I said it was accurate for the small legth it was already. The barrel isnt that long at all.

  • Less than 25cm? I'd think its at least 30cm, because m733 has 30cm long..

  • what makes this gun so accurate is the bore of the barrell, its 6.02mm bore, most stock airsoft rifles of this price are about 6.04mm so for the price the barrell is outstanding, the tightness of the barrell increases the accuracy although i dont know if they can get any tighter than 6.02 and still function properly.

  • Most of the aegs have stock barrel around 6.10-6.20. If its under 6.04 its tight bore then.

  • weird. most people have been getting over 430FPS on this gun

  • I am guessing thats right, This is an older verion, so I am guessing there wasnt perfict seals on this model. I may be wrong, Its a very hard hitting gun.. I know based on the fact that I was shot in the head by it.. lol

  • what size scope do u have on there?

  • A guy from another local team and friend of mine got the M16 version. The metal body is amazing and there are no sqeaks compared to my JG M16. They are great guns, but I hate having a mini type battery in the full size stock.

  • ur so lucky u live in hawaii in california in the city i live there are very few places to airsoft

    so we travel lol

  • That looks awsome! What is the barrel length? And btw did you get my PM?

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more