@theycallmefibb stop looking for beef and grow up you clown.. everyone has the right to ask questions, so why don't you apply yourself and not look for beef, but thank you for the advice..
Anyone who downloaded these and are still saying this is stupid, stop talking about yourselves. Clearly you are retarded. Thanks for the uploads I will use this lots.
hey wasup im a 15 year old Dubstep producer and i would like to ask you guys if you wnna go listen my first Dubstep song ever made. please listen!: /watch?v=aUJfOLHag6E
@AcidicDreamer yes this is a stupid question, but which folder do I install the presets to?! thanks in advance.. there's 4 folders within the Data folder in the Sytrus folder?
@KOERLMK There's no need, you can install too any folder, then simply open fruity loops and the folder you installed to. Then drag and drop the files into fl, youll find them in green lettering.
@KOERLMK Are you fucking kidding me? Do you have any idea how easy this shit is to make if you were simply to apply yourself and learn how the fucking shit works? Jesus Christ this is sad.
also, kids, if you are using a controller you can assign the rates and speeds to knobs/slides and it makes editing all these wobbles a little bit easier and faster. right click the amount/rate in question, and click assign to controller, turn the knob or move the slide and it should automatically pick it up!
You can also use "Edit Events" and control the knobs' values directly with an LFO (Alt+O).
For a wobble bass, you're usually best with OSC one at a square and OSC two at a square or a saw. You then can then get rid of some of that 'hissing' by lowering the cutoff in the filter.
To get it to wobble, you can set LFO 1's type to 'filter', enable 'sync', turn up the amount and play around with the rate.
Also make sure to play with the 'reso' in the filter.
Also, what I should have mentioned is that one of the OSCs is often at a pitch one octave lower than the other OSC, and that the amount of OSC 3 I usually turn up very high to get a deeper sound. Also, make sure to play with the filter env if you are looking for a 'driving' kind of bass instead of a wobbling one. I would recommend against using 'drive' in the output, as it tends to blur your sound. Make sure to experiment with using 'ringmod'; I've gotten some good results with it.
@TheCodyx7 you must be a complete retard and have no understanding of synthesis.. i got it to wobble instantly. in any case these sounds are very amateur. for beginners. i recommend getting Rob Papen's Albino3, Blue and Predator. and watch some tutorials on synthesis. Because again you obviously have no clue.
Can someone tell me how to make the bass dirty?? If you know what I mean...Like when you are playing it in you're car...Or you have Sub Whoopers...How do you make them shake with bass?
How do I change the speed/ sound of the bass in the final version? I'm not great at FL Studio, but when I try and change it, it changes ALL my patterns. I can't seem to make more than one pattern.
ok, i set every control on Wasp XT to match up to the settings shown here on this video, and what comes out sounds NOTHING like any dubstep wobble i've heard.
dudes 'dubstep basses' are all about downpitching the bass. start with a sine wave and pitch -24. send to filter 1 with lfo on. play a bit with the cutoff, rate,.. . Then you proceed with other oscillators do same put keep in harmony (maybe -12 pitch, etc). Make sure too add reverb, whether onboard of the synth or external... EQ also
Download the file, open it in WinRar, Double click each one of them and they should open in one FL program. When open, Save the file as 'Dubwobble' or whatever you choose memorable.
most wobbles are using the lfo to time the sound with the beat you get a woble going by tweaking your lfo to get a spinning sound than you ajust the knobs acroding to your beat oce you screw with the lfos for awile to get the feel of the low freq osc than you will be set.
can you please make a video of you making the preset. i would much rather learn than just download. that would be awesome man. or just tell me the steps. thanks so much
make a seperate track.. right click the channel, hit 'clone' then edit the speed on there. You will need to do the notes seperately tho to make the rythm
@IGRAFF09 im sure its a little late but just create an automation clip of the speed setting. should be a knob on the plugin, right click it then click "create automation clip" and adjust the speed accordingly on your playlist
man i was supposed to rate this 5 star but i hit 1 by accident so dont take it personally lol btw were the hell do i extract them too? i cant find wasp xt in the plugins
on the left side of the studio it says paks an all that shit yhhh... well at the top left bit of all that there is a little down arrow click that and type in wasp XT and hit enter OORRRRRRRR u can click on channels and just find it that way OOOOOOOORRRRRRRRRRRRRRR when u 1st open fruity loops it says like
kick
clap
hihat
cnare aand wat not right click one of those and then presss insert and insert wasp XT
This has been flagged as spam show
/watch?v=oILTx6lD9r8&feature=g-u
Just found them, check em out. They used Fl studio too
RealityGamingVideos 2 months ago
133 337th view HOLY CRAP
benblue3 4 months ago
Dude, turn your sub up(IF you have one.).. you have way too much low end going on.
notuern 5 months ago
I could listen to this all day
gumdrops27 5 months ago
Dude those were amazing. Especially the first one.
gumdrops27 5 months ago
i love this so much. thank you!
knexdude180 6 months ago
Dudes, why u don't just download massive? Best dubstep plugin 4 free! /watch?v=QdOFn7LF9sE
Deduure 6 months ago
THANK YOOUUU!!!!!!
WoWRuleSify 6 months ago
much appreciated
JobanDhear2K8 7 months ago
Wasp and wobble are two words that sum up dubstep, also war of the worlds tripod
StraightUpStreett 7 months ago
This has been flagged as spam show
/watch?v=8x-IDaOe6DY listen if you want to. my first tune. made with nothing, only fl studio.
Alu142 7 months ago
very useful, thank you man!
atriskaters 7 months ago
good effort wouldnt it be easier too just get some better vsts tho ?
marshallhdc 7 months ago
thanks!!!!!!!!!!!!!!! :DDDD
PDSzONEia 8 months ago
Make a tutorial please? this is exactly the sound I'm looking for.
BlueEnigma34 9 months ago
GO TO MY CHANNEL FOR EPIC FL STUDIO DUBSTEP DONT JUDGE TOO HARD IM ONLY 13!!
flippinghellpatatoe 10 months ago
they sound awesome. now, how do we make them?
Seagerash 11 months ago
@Seagerash Fuck around with the basses, Automate the LFO. And bobs your uncle.
DubstepOnLockdown 10 months ago
Thank you very much maan!! Hello from Russian producers!)
sarwestside 11 months ago
i installed it and opened wasp xt
now what do i do???
REPODONE 1 year ago
these are great dubstep sounds
dutchyfalcon12 1 year ago
How do you make parts of a beat high speed and others not?
FutJJ 1 year ago
@FutJJ Yeah thats what i been asking on ever damn video haha
almostaperson82 1 year ago
@almostaperson82 I know it now: or you make multiple sounds or u use filters =D
FutJJ 1 year ago
@FutJJ right click on rate of lfo 1 and choose edit events, im sure u can figure it out from there
Iglo0DubStep 1 year ago
@Iglo0DubStep i tried it and i cant find out what to do?? :T
123Damonp 1 year ago
@123Damonp the higher u put the bar in that section the faster the wobble
Iglo0DubStep 1 year ago
Awesome!!! Thank you!
braddtatum 1 year ago
Thanks dude its works marvelously.Cheers.
bairrocorderosa 1 year ago
imo, sytrus is way better to make wobble
PhalanxIV 1 year ago
@theycallmefibb stop looking for beef and grow up you clown.. everyone has the right to ask questions, so why don't you apply yourself and not look for beef, but thank you for the advice..
KOERLMK 1 year ago
DUH DEACE!
legitGinger 1 year ago
Yeah! Ur song is fuckin' deep and cool!
Congratulations!
VlaazProjects 1 year ago
Doesnt work
JohnnyJohnJoe 1 year ago
That ain't even sounding good : /
Download Massive VST dude !
SjokkoladeBolleMusa 1 year ago
how do you get it to go wuuuub-wuuuub-wuuuub-wuuuub-wubwubwubwubwub? goes slow then speeds up.
AboveHighStandards 1 year ago
@AboveHighStandards I use automation clips on the speed
Redleader134 1 year ago
Comment removed
VlaazProjects 1 year ago
Guys.. install them here..
\FL STUDIO\Data\Patches\Plugin presets\Generators\Wasp XT
Thumbs up so everyone can see this plz.
nickobro 1 year ago 143
@nickobro what url do you put before this please??
eMxSnIpeZ 8 months ago
@eMxSnIpeZ its not a url its in ure hardrive the thing above is the pc path
FreedomProductionsTV 8 months ago
@nickobro Whats the link so i can download it?
weeman1493 6 months ago
Anyone who downloaded these and are still saying this is stupid, stop talking about yourselves. Clearly you are retarded. Thanks for the uploads I will use this lots.
thimblemunch 1 year ago
THANK YOU
yUnGMoNeY98 1 year ago
Thaank you !!
MrKylePopovich 1 year ago
you should de-click dual, sounds better imo
Escobar197 1 year ago
tnx for presets mate :)
illquidOFFICIAL 1 year ago
FAIL I DID THOSE EXACT SETTINGS TO A TEE
gokusupersaiyan100 1 year ago
thanks
bumchiller 1 year ago
thanks man!
drunkenyeknom 1 year ago
nice.
bleakbeats 1 year ago
damm man thanks for posting those wobble presets. I like a little diversity in my music =]
if you have any more awesome sounding presets please post 'em!
DeadknightSixXx 1 year ago
Thanks
DjHoustoner 1 year ago
haha fkn gimps cant do it ... just common sence
FLEXX3199 1 year ago
thanx dude sounds gr8
jordanisyourfriend 1 year ago
hey wasup im a 15 year old Dubstep producer and i would like to ask you guys if you wnna go listen my first Dubstep song ever made. please listen!: /watch?v=aUJfOLHag6E
dragonkelv 1 year ago
Thanks alot man, I used one of these for my song that I posted in the video response section (Space Dip).
SwatbotDubstep 1 year ago
@AcidicDreamer yes this is a stupid question, but which folder do I install the presets to?! thanks in advance.. there's 4 folders within the Data folder in the Sytrus folder?
KOERLMK 1 year ago 7
@KOERLMK There's no need, you can install too any folder, then simply open fruity loops and the folder you installed to. Then drag and drop the files into fl, youll find them in green lettering.
XModzMeCodzX 1 year ago
@KOERLMK Are you fucking kidding me? Do you have any idea how easy this shit is to make if you were simply to apply yourself and learn how the fucking shit works? Jesus Christ this is sad.
theycallmefibb 1 year ago
thanx man
billfy13 1 year ago
You're awesome man, thanks for the presets.
gimmieurBRAIN 1 year ago
everyone here is idiots i found this video very helpfull tnx man a lot!!!
GXdrummer 1 year ago
I Downloaded your preset, but how do i import it?
NanoAudioX 1 year ago
check my vid in the response, (button) everything in the background was done with WaspXT
FamussAmuss 1 year ago
copied everything and tripple checked. Just getting a high pitched whine.
kevin0323 1 year ago
@kevin0323 me too man... :/
And just got some Sine sound.
that probably isn't wobble configuration...
DiavoloRS16 1 year ago
@DiavoloRS16 This video may just be a joke. I found a better video by searching around on YouTube.
kevin0323 1 year ago 6
@kevin0323 :D you making Dub-step too? :)
I found a madafakin' vst-i for wooble.... ;)
just pm me if you want it!!!
peace... \./
DiavoloRS16 1 year ago
@DiavoloRS16 hello, i make dubstep too! can you send me the VST-I for the wobble bass, please? i'm out.
DeKruidenwijk 1 year ago
@DeKruidenwijk Sure!
I'm gonna upload it, an' send you the link! If something is wrong, just pm me. ;)
DiavoloRS16 1 year ago
@kevin0323 Massive is the best dubstep wobble vst
adesattftl 10 months ago
Massive is shit
scottyxander 8 months ago
@scottyxander You can make pretty much every synth with massive if you know how to use it.
Hydrogen1994 8 months ago
also, kids, if you are using a controller you can assign the rates and speeds to knobs/slides and it makes editing all these wobbles a little bit easier and faster. right click the amount/rate in question, and click assign to controller, turn the knob or move the slide and it should automatically pick it up!
FamussAmuss 1 year ago
@FamussAmuss
You can also use "Edit Events" and control the knobs' values directly with an LFO (Alt+O).
For a wobble bass, you're usually best with OSC one at a square and OSC two at a square or a saw. You then can then get rid of some of that 'hissing' by lowering the cutoff in the filter.
To get it to wobble, you can set LFO 1's type to 'filter', enable 'sync', turn up the amount and play around with the rate.
Also make sure to play with the 'reso' in the filter.
Kelarre653 1 year ago
Also, what I should have mentioned is that one of the OSCs is often at a pitch one octave lower than the other OSC, and that the amount of OSC 3 I usually turn up very high to get a deeper sound. Also, make sure to play with the filter env if you are looking for a 'driving' kind of bass instead of a wobbling one. I would recommend against using 'drive' in the output, as it tends to blur your sound. Make sure to experiment with using 'ringmod'; I've gotten some good results with it.
Kelarre653 1 year ago
Very nice Plugin!
RoodyAlex 1 year ago
Comment removed
TheCodyx7 1 year ago
@TheCodyx7 you must be a complete retard and have no understanding of synthesis.. i got it to wobble instantly. in any case these sounds are very amateur. for beginners. i recommend getting Rob Papen's Albino3, Blue and Predator. and watch some tutorials on synthesis. Because again you obviously have no clue.
zigomyte 1 year ago
Comment removed
TheCodyx7 1 year ago
Comment removed
TheCodyx7 1 year ago
@zigomyte learn to spell faggot
TheCodyx7 1 year ago
@zigomyte and btw im a fucking DJ so shut the fuck up
TheCodyx7 1 year ago
@TheCodyx7 looks like some one is getting defensive... obviously his comment hit home
TheOfficialHostile 1 year ago
@TheOfficialHostile shut up faggot
TheCodyx7 1 year ago
mate you are a fucking legand! thanks alot pal! :D
SGTB1ADE 1 year ago
I just broke my computer trying to learn how to use this program... ;-)
MrSonne86 1 year ago
NICE!! check my first dubstep out
ACCLUDE31 1 year ago
thank you!!
hanslutherh 1 year ago
OMG these are dirty! haha thanks man
ScrillaDamage 1 year ago
Thank you :)
bobbziz 1 year ago
I made one DIRTY DubStep Track with this guys Presets
Thanks for Posting
ArGyProductions 1 year ago
where can i find the full version?
i cant save the sounds in a beat
bozzano269 1 year ago
Can someone tell me how to make the bass dirty?? If you know what I mean...Like when you are playing it in you're car...Or you have Sub Whoopers...How do you make them shake with bass?
FL0DR0 1 year ago
@FL0DR0 wut the fuck i a sub whooper
pazeamk 1 year ago
This was easy to figure out. All you do is mess around with the LFO 1.
d0gg0d 1 year ago
This has been flagged as spam show
please check out my Linkin park - catalyst (electro dubstep) remix on my channel - its much more different!
Cheers!
timothysan 1 year ago
dude that is fucking sick
spreadtheword420 1 year ago
this is sick yo
check my shit using garageband
SoRipsMusic 1 year ago
@dormiturefl dude mess with the knobs the lfo section, turn amount up all the way and play with the speed
synthplayer69 1 year ago
How do I change the speed/ sound of the bass in the final version? I'm not great at FL Studio, but when I try and change it, it changes ALL my patterns. I can't seem to make more than one pattern.
LukeElsdonVideos 1 year ago
thanks, you are a good person for uploading those.
TCminneapolis 1 year ago
Thank's alot mate, helped alot :) subbed
MercOhra 1 year ago
You can make a much bether bass with The Vst Massive and Sylenth1 but this was a ncie bace thumbs up:)
HardLiquor145 1 year ago
Did you do anything else to the Wasp XT besides what's in the pic because I matched all the settings and it sounds nothing like what you have.
slappoof 1 year ago
@slappoof
did the same thing !
Stefan777x 1 year ago
HE SHOWS U HOW TO MAKE IT, LOOK AT THE EFEFING PICTURE AND SYNC UR WITH IT!!!!!!!!!!!!!!
RayRay2781 1 year ago
hey guys go on my youtube file n look at my latest dubstep beat called - feed me more! :)
farhad888166 1 year ago
where do i put the FL files once I've downloaded it?
erikmabry 1 year ago
@erikmabry C:\Program Files\Image-Line\FL Studio 9\Data\Patches\Plugin presets\Generators\Wasp XT
DustedOne1 1 year ago
@DustedOne1 thank you!
erikmabry 1 year ago
i did it exactly the same but its all quite and not electronic sounding!
stabslash81 1 year ago
how do i create this?
091nick 1 year ago
how do you make those changes in the speed of the wobble?
morphingrecords 1 year ago
how do i layer for my bass? is it sub bass than normal bass than mid bass?
flotex123 1 year ago
where should you download the file to?
flotex123 1 year ago
FUCK OFF
KungenWP 1 year ago
Thanks!
FenderBender93 1 year ago
Yo could you please tell me how to automate with wasp XT? xD just can't find the right knob < lol
DuBStepHeadz 1 year ago
@DuBStepHeadz Nevermind i think i know :P
DuBStepHeadz 1 year ago
@DuBStepHeadz Tell me the right knob then plz, I can't find it either.
Lollerotjeh89 1 year ago
@Lollerotjeh89 It's the rate knob on osc 1 u right click and click edit events. :)
DuBStepHeadz 1 year ago
ok, i set every control on Wasp XT to match up to the settings shown here on this video, and what comes out sounds NOTHING like any dubstep wobble i've heard.
Crimson126 1 year ago
@Crimson126 Did yours sound like a flute? Cus thats the sound I got!
sarcasticSte 1 year ago
@sarcasticSte ya, definately sounded like a flute, i didnt get no fuckin wobbles
Crimson126 1 year ago
What's goin on :S ?
SjokkoladeBolleMusa 1 year ago
That picture is the original settings...
mitchelltjee 1 year ago
Woah, Where do i stick them?
Samuellx3 1 year ago
dudes 'dubstep basses' are all about downpitching the bass. start with a sine wave and pitch -24. send to filter 1 with lfo on. play a bit with the cutoff, rate,.. . Then you proceed with other oscillators do same put keep in harmony (maybe -12 pitch, etc). Make sure too add reverb, whether onboard of the synth or external... EQ also
equaleyez187 1 year ago
@equaleyez187 // ok maybe it's not ALL about the down pitch
equaleyez187 1 year ago
wer dyou get sytrus isit like downloadable on the net for free ?
ConorHandy 1 year ago
@ConorHandy sytrus comes with FL, just right click on a channel, and hit insert, then slick sytrus down towards bottom. Then you have it up :)
lDarkTurkey 1 year ago
some one please check out my Dub pls comment, so i can spot my faults
ultimategrow 1 year ago
yo, wasp aint soundin too bad. i use sytrus, but this shit is legit. i might have to make a new preset haha
DressLikeAGuitarget 1 year ago
how do i get these presets in wasp xt ?
TheBazzPounderz 1 year ago
@TheBazzPounderz
Download the file, open it in WinRar, Double click each one of them and they should open in one FL program. When open, Save the file as 'Dubwobble' or whatever you choose memorable.
KongraDNB 1 year ago
where is this lfo?
TheAceDub 1 year ago
Add distortion and you are all set :)
BatspindaVL 1 year ago
@BatspindaVL how do you add distortion?
lDarkTurkey 1 year ago
most wobbles are using the lfo to time the sound with the beat you get a woble going by tweaking your lfo to get a spinning sound than you ajust the knobs acroding to your beat oce you screw with the lfos for awile to get the feel of the low freq osc than you will be set.
GhostTech100 1 year ago
ur not explaining shit!!
dancepeda 1 year ago
hes made presets? and this is a demo? your eyes are shit. and shout outs to the dickhead that give him a thumbs up :/ sorted that though didnt i rofl
skatejam7 1 year ago
I've done everything the same as you on that picture but i don't hear wobble! lol
I'm a complete beginner on FL and i'm getting frustrated with it. Can anyone help me?
Dannyj0e1 1 year ago
Yes, Message me. :) i could email you a fl studio project file on with some good 3x0sc dub wobbles on
alexxj220 1 year ago
idiot.
skatejam7 1 year ago
How do you increase the wobble speed with wasp
weinerwaffle 1 year ago
@weinerwaffle turn the LFO 1 Rate up or down
DJeX 1 year ago
nice wooble
djFriehs 2 years ago
This has been flagged as spam show
come check out my channel
new tracks
chill and confused up
marsstu
marsstu1000 2 years ago
nice !
hsReBurnhs 2 years ago
thx!
Cheatplayer 2 years ago
once upon a time there was a vst version of the wasp that worked on a pc and it worked on other VST platforms, not just fruityloops.
Anyone got a link to it or a version of it?
gordongate 2 years ago
can you please make a video of you making the preset. i would much rather learn than just download. that would be awesome man. or just tell me the steps. thanks so much
dormiturefl 2 years ago 52
@dormiturefl
I wanna learn too! Don't leave me out!
Kelarre653 1 year ago
@dormiturefl why? just take the preset and look at it you can learn a lot by that
8B6EB8 1 year ago
@dormiturefl LFO Madulation Rate 1
Right Click> Create Automation Clip
wads40 1 year ago
sorry, can't find on google, anyone know how to import presets into FL studio?
SimLees 2 years ago
people check my tunes using fruity loops studio 9 not that good but still learning rate and comment please :D
blaker9333 2 years ago
This is pretty sweet. Thanks!
guitarist809 2 years ago
i dont get how u do the speed on key, i always get some offbeat wahwah wobble bass
amfiliosis 2 years ago
alright thanks i try that i have dun a diffrent way 2 but i will try this thanks mate
IGRAFF09 2 years ago
how to u change the speed like u dun in the vid ???
IGRAFF09 2 years ago 5
make a seperate track.. right click the channel, hit 'clone' then edit the speed on there. You will need to do the notes seperately tho to make the rythm
stephengriifith 2 years ago
@IGRAFF09 Try linking the a midi knob to the LFO and vary it's speed (1/8th, 16th etc..)
supadupa555 2 years ago
if u download massive for fruity loops u can do that..
blaker9333 2 years ago
where can i download massive from?
goonerboy93 2 years ago
type in on google native instruments (massive) rapid share P.S subscribe to my channel and check my beats :P
blaker9333 2 years ago
@IGRAFF09 im sure its a little late but just create an automation clip of the speed setting. should be a knob on the plugin, right click it then click "create automation clip" and adjust the speed accordingly on your playlist
wheelymeneely 1 year ago
@wheelymeneely I dont really get how those automation clips work:(
123435454646453434 1 year ago
Comment removed
TheCodyx7 1 year ago
@IGRAFF09 automation clip > lfo 1 speed
postkip 1 year ago
@IGRAFF09
just make the wobble, right click and click "clone", and then make that one a different speed
OutKryStep 1 year ago
man i was supposed to rate this 5 star but i hit 1 by accident so dont take it personally lol btw were the hell do i extract them too? i cant find wasp xt in the plugins
DrumVibes2k9 2 years ago 2
on the left side of the studio it says paks an all that shit yhhh... well at the top left bit of all that there is a little down arrow click that and type in wasp XT and hit enter OORRRRRRRR u can click on channels and just find it that way OOOOOOOORRRRRRRRRRRRRRR when u 1st open fruity loops it says like
kick
clap
hihat
cnare aand wat not right click one of those and then presss insert and insert wasp XT
blaker9333 2 years ago
thanks for this! really cool wobble bass! i used it in my song:
watch?v=AsCbCyjziIo
TripTune 2 years ago