This video has what all instructional videos should have: great lighting, focused close-ups, and audible description. Most detail-strip videos are missing at least two of these.
@SilverDollarSwede12 Glad to hear that, if you want to see this done faster for reference (less chatter) you might like to check out my, "Know Your Glock" video.
@PaidbyHim The extractor is the part that is visible on the slide, just behind the ejection port. It's spring loaded and grips the case head so that when the action opens the case is pulled back until it contacts the ejector which is an immovable piece of steel that is cast into the trigger mechanism housing. As the slide continues rearward the ejector forces the shell to pivot until the extractor loses it's grip on the case head, thus flipping the case clear of the ejection port.
Hi its Norbert again:-) Please please do the video on detail take down of Sig P200!!! I have Glock 21sf that i can clean perfect thanx to you :-) but i own like you Sig P220 and i do basic field strip only for cleaning:-( If you do such a great video about Sig you'll make people very happy:-) Thank you and take care .
@kwintoh That sounds like a good idea, first, though, I have to locate an armorer's manual and do some studying. I'd likely have to purchase some tools, not sure, though. That's one of the reasons I like Glocks so much, it's so darn easy to get inside of them quickly if you want to. I've never done more than a field strip on a Sig, either.
Thanks for this video. It saved me when I got lost trying to follow along with another YouTubers disassembly video. Was knocking away (lightly) on the unbudging trigger pin, thanks to the wiggle it came out in a matter of seconds.
@thayr That is the exact reason I made this video, there are too many tutorials on YouTube that don't use the Glock Armorer's method and what those videos literally teach, is how to damage parts on your Glock. Thanks for letting me know about your experience.
It's a thrill for me to know that my videos are being watched in other countries around the world. Thank you for the kind greetings.
The method that I used to use was to keep a .22 Long Rifle shell in my Glock kit and push that into the spacer sleeve and hold the assembly on the table while compressing the spring. Using the slide is pure genius but I can't take credit. This method comes straight from the Glock Armorers Manual.
I’m familiar with complete disassembling/assembling my Glock 19, but I don’t know the method You show at 04:37. Until now, I’m simply place the spacer sleeve over the firing pin, put them on the table and holding by hand while put the firing spring and spring cups in place. Using the slide as a tool to complete assembling the firing pin unit is something new for me! Next time I’ll try this method. You're right, there is always more to learn.........Thanks, and greetings from Hungary! :-)
Is there a source that lists common parts? I have a glock 19, but thinking of getting a 17. I'm wondering what parts are interchangeable. Like, is the firing pin assembly exactly the same?
@BfSkinnerPunk For the most part, if the caliber is the same there are few differences. Example of an exception: the mini Glocks have shorter breech blocks. I started to answer this but realized I was about to write a book. You will know when you order your parts online (find the cheapest deal on sale) which parts go to which models. The 17 and 19 are almost completely interchangeable.
@theKGB65 Thanks. Well, I looked at a couple of glock parts dealers... hoping to be able to find exactly this information ("This firing pin fits all glock 9mm"), but they aren't laid out like that (glockmeister and Topglock). Very well, I think I'll get a 17 and, when I buy a spare part, I'll just check it myself. You're video is a huge help, though. Thanks for your good work!... you seem like one of those rare people that insists on doing things right.
I just subscribed to your videos. I disassembled my Glock 19 according to other video instructions and was frustrated with the bad video and vague instructions. You videos are exposed very nicely (white background (slightly over exposed so that the darker glock parts are exposed correctly! Did you do that on purpose? very smart!)
This information is amazing. Very thoughtfully done. Can you give a list of spare parts to have for a Glock owner?...and essential Glock "stuff" to have?
@BfSkinnerPunk That's great, I really appreciate that! Yes, I increased the exposure on the camera so that the black parts would be visible and I also placed a white rag behind the translucent plastic tray so that it would be over exposed and make the gun parts really pop out. The camera is held by a vertical clamp from the ceiling and I'm looking at the screen while working. That's why I seem a little uncoordinated with my movements sometimes.
@BfSkinnerPunk As far as spare parts are concerned, they are relatively inexpensive so I like to have spares of the parts that could get lost like the firing pin safety spring, etc. But wouldn't it be fun to have a spare... everything? Just buy a whole new Glock and call it, "spare parts" :- )
@theKGB65 Just got back from a gun show and did exactly that ---> bought another glock 19. This one was very slightly used.... after washing it according to your directions, it is VERY hard to tell that it is used. I named the gun "spare parts".... but I think I'll get a few spare springs anyway. I paid $400 for it.... not an ultra bargain, but ok for these parts.
@BfSkinnerPunk That sounds terrific! The price was pretty darn good if you ask me. I pay close to top dollar for grungy police trade in Glocks (especially ones with night sights) because I honestly don't think there is any such thing as a "used" Glock. I tell my friends that if I were to sell my house and everything I own and invest in ammo, I could not even come close to wearing out a Glock pistol. I like your way of thinking... calling it "spare parts".
@theKGB65 "My" way of thinking? Hey, it's all your thinking...don't blame me. I never owned a weapon until a year ago, so I'm just starting to build a proper (very small) arsenal. The Glock is a given: It is common...very common, lots of available parts, simple, reliable, high capacity. The XD has all of that, but it isn't nearly as common..a major feature for me. Wish the glock had a clearer "chambered round" indicator tho. So, what type of personal defense ammo do you recommend?
@BfSkinnerPunk Okay... I love helping other people spend their money!!! As far as which ammo, my theory is to go with any high quality self defense ammo that is affordable enough to gain my confidence through reasonable testing in a particular firearm and one that is commonly available enough that I can pick some up without making an online order. Walmart sells affordable and plentiful Winchester Supreme Elite Bonded, you might try that stuff in your Glock(s).
I believe you wil find that most, if not all, comments will give this a five star. I would now feel very comfortable stripping down a Glock using your video as a guide. Thanks for doing such a good job and please continue doing similar videos. You know how to do it correctly.
This video has what all instructional videos should have: great lighting, focused close-ups, and audible description. Most detail-strip videos are missing at least two of these.
JoshDoubleM 2 months ago
@JoshDoubleM Thanks, Josh. Just wish I would have had my HD camera back then...
theKGB65 2 months ago
You did an excellent job explaining the procedure. I no longer have to worry about whether or not I can do this myself. THANKS!!!!!
SilverDollarSwede12 3 months ago
@SilverDollarSwede12 Glad to hear that, if you want to see this done faster for reference (less chatter) you might like to check out my, "Know Your Glock" video.
theKGB65 3 months ago
Excuse my ignorance, but is the extractor and ejector the same thing?
PaidbyHim 4 months ago
@PaidbyHim The extractor is the part that is visible on the slide, just behind the ejection port. It's spring loaded and grips the case head so that when the action opens the case is pulled back until it contacts the ejector which is an immovable piece of steel that is cast into the trigger mechanism housing. As the slide continues rearward the ejector forces the shell to pivot until the extractor loses it's grip on the case head, thus flipping the case clear of the ejection port.
theKGB65 4 months ago
Great video, thank you
jeeps100 4 months ago
@jeeps100 Nice of you to say so, thanks.
theKGB65 4 months ago
Hi its Norbert again:-) Please please do the video on detail take down of Sig P200!!! I have Glock 21sf that i can clean perfect thanx to you :-) but i own like you Sig P220 and i do basic field strip only for cleaning:-( If you do such a great video about Sig you'll make people very happy:-) Thank you and take care .
kwintoh 1 year ago
@kwintoh That sounds like a good idea, first, though, I have to locate an armorer's manual and do some studying. I'd likely have to purchase some tools, not sure, though. That's one of the reasons I like Glocks so much, it's so darn easy to get inside of them quickly if you want to. I've never done more than a field strip on a Sig, either.
theKGB65 1 year ago
When you're putting the firing pin spring back on does it matter which way it goes?
spiff2268 1 year ago
@spiff2268 No, actually the firing pin spring can go on either way.
theKGB65 1 year ago
Thanks for this video. It saved me when I got lost trying to follow along with another YouTubers disassembly video. Was knocking away (lightly) on the unbudging trigger pin, thanks to the wiggle it came out in a matter of seconds.
thayr 1 year ago
@thayr That is the exact reason I made this video, there are too many tutorials on YouTube that don't use the Glock Armorer's method and what those videos literally teach, is how to damage parts on your Glock. Thanks for letting me know about your experience.
theKGB65 1 year ago
It's a thrill for me to know that my videos are being watched in other countries around the world. Thank you for the kind greetings.
The method that I used to use was to keep a .22 Long Rifle shell in my Glock kit and push that into the spacer sleeve and hold the assembly on the table while compressing the spring. Using the slide is pure genius but I can't take credit. This method comes straight from the Glock Armorers Manual.
Very cool motorcycle you have there, by the way.
theKGB65 1 year ago
I’m familiar with complete disassembling/assembling my Glock 19, but I don’t know the method You show at 04:37. Until now, I’m simply place the spacer sleeve over the firing pin, put them on the table and holding by hand while put the firing spring and spring cups in place. Using the slide as a tool to complete assembling the firing pin unit is something new for me! Next time I’ll try this method. You're right, there is always more to learn.........Thanks, and greetings from Hungary! :-)
CagivaElefant900 1 year ago
EXCELLENT WORK!!!!!!!! Thanks for it!
CagivaElefant900 1 year ago
@CagivaElefant900 No problem, it was fun preparing for this video, always more to learn.
theKGB65 1 year ago
Is there a source that lists common parts? I have a glock 19, but thinking of getting a 17. I'm wondering what parts are interchangeable. Like, is the firing pin assembly exactly the same?
BfSkinnerPunk 1 year ago
@BfSkinnerPunk For the most part, if the caliber is the same there are few differences. Example of an exception: the mini Glocks have shorter breech blocks. I started to answer this but realized I was about to write a book. You will know when you order your parts online (find the cheapest deal on sale) which parts go to which models. The 17 and 19 are almost completely interchangeable.
theKGB65 1 year ago
@theKGB65 Thanks. Well, I looked at a couple of glock parts dealers... hoping to be able to find exactly this information ("This firing pin fits all glock 9mm"), but they aren't laid out like that (glockmeister and Topglock). Very well, I think I'll get a 17 and, when I buy a spare part, I'll just check it myself. You're video is a huge help, though. Thanks for your good work!... you seem like one of those rare people that insists on doing things right.
BfSkinnerPunk 1 year ago
I just subscribed to your videos. I disassembled my Glock 19 according to other video instructions and was frustrated with the bad video and vague instructions. You videos are exposed very nicely (white background (slightly over exposed so that the darker glock parts are exposed correctly! Did you do that on purpose? very smart!)
This information is amazing. Very thoughtfully done. Can you give a list of spare parts to have for a Glock owner?...and essential Glock "stuff" to have?
BfSkinnerPunk 1 year ago
@BfSkinnerPunk That's great, I really appreciate that! Yes, I increased the exposure on the camera so that the black parts would be visible and I also placed a white rag behind the translucent plastic tray so that it would be over exposed and make the gun parts really pop out. The camera is held by a vertical clamp from the ceiling and I'm looking at the screen while working. That's why I seem a little uncoordinated with my movements sometimes.
theKGB65 1 year ago
@BfSkinnerPunk As far as spare parts are concerned, they are relatively inexpensive so I like to have spares of the parts that could get lost like the firing pin safety spring, etc. But wouldn't it be fun to have a spare... everything? Just buy a whole new Glock and call it, "spare parts" :- )
theKGB65 1 year ago
@theKGB65 Ah yes... the extra glock as spare parts trick! I'll have to talk to my girl about that!
BfSkinnerPunk 1 year ago
@theKGB65 Just got back from a gun show and did exactly that ---> bought another glock 19. This one was very slightly used.... after washing it according to your directions, it is VERY hard to tell that it is used. I named the gun "spare parts".... but I think I'll get a few spare springs anyway. I paid $400 for it.... not an ultra bargain, but ok for these parts.
BfSkinnerPunk 1 year ago
@BfSkinnerPunk That sounds terrific! The price was pretty darn good if you ask me. I pay close to top dollar for grungy police trade in Glocks (especially ones with night sights) because I honestly don't think there is any such thing as a "used" Glock. I tell my friends that if I were to sell my house and everything I own and invest in ammo, I could not even come close to wearing out a Glock pistol. I like your way of thinking... calling it "spare parts".
theKGB65 1 year ago
@theKGB65 "My" way of thinking? Hey, it's all your thinking...don't blame me. I never owned a weapon until a year ago, so I'm just starting to build a proper (very small) arsenal. The Glock is a given: It is common...very common, lots of available parts, simple, reliable, high capacity. The XD has all of that, but it isn't nearly as common..a major feature for me. Wish the glock had a clearer "chambered round" indicator tho. So, what type of personal defense ammo do you recommend?
BfSkinnerPunk 1 year ago
@BfSkinnerPunk Okay... I love helping other people spend their money!!! As far as which ammo, my theory is to go with any high quality self defense ammo that is affordable enough to gain my confidence through reasonable testing in a particular firearm and one that is commonly available enough that I can pick some up without making an online order. Walmart sells affordable and plentiful Winchester Supreme Elite Bonded, you might try that stuff in your Glock(s).
theKGB65 1 year ago
I believe you wil find that most, if not all, comments will give this a five star. I would now feel very comfortable stripping down a Glock using your video as a guide. Thanks for doing such a good job and please continue doing similar videos. You know how to do it correctly.
mjes51 1 year ago
@mjes51 Thank you for the encouragement, just wish this video could be condensed down to less than half as long without missing any critical info.
theKGB65 1 year ago
Very good! This is just what I needed! Thank you.
nbanolfkid 1 year ago
Really good job!!!!
hickok45 2 years ago
I am honored to receive the endorsement of the exalted Master. Thanks Hickok!
theKGB65 2 years ago
Looks like you hit this one out of the park. Good lighting, and explained clearly. I would expect your hit count to grow from this video.
bronk5150 2 years ago
Just get the Glock Tool and you only need 1 tool lol 5 stars
GlockAnimal 2 years ago
Yea, I heard that one too! Hey, I sure tried but even the Glock Armorer's Manual says you need all three tools.
theKGB65 2 years ago