Singularity Beast II Build Log Part 7

[sheek1982]

thats alota sucking going on!

[smoke1877]

are you using 2 unDesigns Infinite Pump Brackets to hold the dual pump top?

[SingularityComputers]

@smoke1877 Yes.

[mib8600]

How did you use 2 psu together?

[SingularityComputers]

@mib8600 I talked about it in detail in the build log. You need a dual power supply starter.

[alessandro4812]

@mib8600 io ho un pc simile al tuo e quando ci gioco ci vuole la centrale elettrica,figurati il tuo con 2 alimentatori da 1200 hahahaha a me ogni 2 mesi mi arrivano bollette da urlo tipo 3 400 euro anche di più. ciao

[devineace1]

till today i did not know that you could put a sound card on a pcie2 slot meant for a graphics card...

[carefulwiththat]

This rig is the Holy Grail! Cheers mate!

[mrtobsi3771]

you so awesome! big thumbs up for the upcoming full watercooling tutorial :)

[mikeallensonntag]

In my experience I have less dust issues running negative pressure.

[SingularityComputers]

@mikeallensonntag Negative pressure means that air gets sucked in through the cracks and anywhere else it can get in, and dust gets sucked in with it.

[Jebus63]

@SingularityComputers Nice, post an updated vid of it if you end up throwing those ssds in it. Regards

[mikeallensonntag]

Jesus...two AX1200's I bet your breaker cant handle both psu's maxed lol

[EliteHitokiri]

I got to thank you. I just order one of those Caselabs cases! I'm going to be adding two Swiftech mcr320rev3 drives to it. What would you say is the best placement for those considering the pump,rad, and res are built-in to them? I was thinking either both up top and tilting the case during priming? Or maybe one up top and one in the front with the 360 bay accessory? Thanks so much.

[fergdizzle9090]

your builds are just simply amazing. i love how in depth you go unlike other channels, truly shows how intelligent you are and how much you know about these builds

[niklasxl]

i was just going to ask about ssd's but then i saw what u are thinking and that is a great idea t put ssd's in the top :D reeely nice machine btw :D how much did you have to spend :O

[simonsmobile]

I noticed the temp sensor has gone from the dual pump top, was it not compatible with the onboard opt temp headers? I have the Rampage IV Formula and was hoping to take advantage of those headers.

[MajorG0A17]

I would Like to see the entry level water cooling setup. Cpu and motherboard. I see no advances for water cooling a gpu if you have one, or you have a pci slot between two gpus.

Is it worth water cooling ram? Also why don't water blocks for mobos are missing fins for air cooling with the water?

Also for the sata power cables those connectors are movable, they just need heat shrink where you remove them. watch?v=Pi7rWKDBIHA

[MrError303]

I wish I could afford this....

[Rickos1996]

Can you show us how you would build a gaming computer for 1500€ (1850 austrailian dollar)

[smoke1877]

love the build hope mine turns out this good since it will be my first watercooled build

[TheNotoriousGamer]

Should get 7970's if you want to break records.

[SingularityComputers]

@TheNotoriousGamer Yep you're right. I'm going to wait and see what NIVIDIA can do first.

[TheSkylie]

I know I can't wait for the water cooling tutorial. I'm building a system sometime either this year or next.

Definitely looking forward to seeing how you do it.

[vbstein]

Do you find the VRMS run abit hot while overclocking?

[SingularityComputers]

@vbstein It hasn't been a problem yet, but I haven't got that high with my OCs yet either. I will be water-cooling the motherboard soon anyway.

[FozCooled]

You've done it again mate, looks great! I just wish they taught this stuff in school :)

Learning a lot from your vids. Keep them coming.

[burgundypoint]

Why you so small Singularity Beast I ?

[TheFenrisDragon]

Maybe sand down those taps ?

[NameXXSensei]

Why is the SLI bridge upside down?

[s3thooligan]

absolutley awesome, but please, remove those wheels on the case.

[pete17989]

get rid of the tabs on the sli bridge or just use ur old one

[maphacker111]

Nice build :)

[xsecretx666]

I've never liked the idea of water cooling, seemed unnatural to me in the past, but after watching your videos I'm contemplating it for the first time. Great vids :)

[johnboy73525]

I can't wait for the water cooling guide! Plz hurry so I can get mine going for sure :)

[seigified]

Damn! I can't wait to see the benches, bro! Good work! Good work!

[WARFOX101]

I like what you have done with the wire management. Wire management takes forever especially if your going for a ridiculously perfect look. Which by the way is hard to pull off. Its nice and tidy i like it. Also great idea on not stuffing the wires between the hard drive. Ive tried to do that in one of my builds and it seemed like i would break the sata connectors on the hard drive. Also thought it would restrict airflow between the hard drives. I love what you have done so far.

[theyash06]

oh yeh dont forget the ROG connect if it has it :S wasn't sure if it had it like my mobo

[leanlifter1]

Anyone can you spray paint the GPU PCB just curious if the card will still function as intended from the factory after the paint drys.

[theyash06]

oh love that upside down sli bridge

[GigabyteC300]

@theyash06 Australian!

[GigabyteC300]

Reposition the sata power plugs to the hard drives and/or ssd's on the power supply cable, so that they are the same pitch as the respective hard drive sockets. That way you will do away with all those loops, it will look much neater in that area.

[METALsyndr0me]

I love this channel.

[jounynFM]

Do you ever lap your CPU or block?

[SingularityComputers]

@jounynFM No I haven't bothered yet. The difference to temps is not enough and I often sell my CPUs down the track.

[jounynFM]

@SingularityComputers Ah gotcha. I did it once for fun on an old dual core LGA 755 and got ~5*C improvement, but I'm a bit hesitant to do it on my 2600k. I think I definitely won't now. Thanks for answering :),

[Mattcamel51]

Don't forget about the Dominator memory.

[SingularityComputers]

@Mattcamel51 I almost got some, but it was up on my suppliers site for like 10min and so I missed out.

[Mattcamel51]

@SingularityComputers That's too bad. Are you still going to buy them with they get back in stock?

[YCheez64]

good god why do you need 2 AX1200s?

[SingularityComputers]

@YCheez64 I had them already and I love overkill lol.

[udontseemebutiseeyou]

sand down the tabs on your extra sli bridge

[retpyrc]

Why is your SLI bridge upside down?

[SingularityComputers]

@retpyrc lol.

[hX4r15]

@retpyrc maybe watch the video, he explains in 1:40

[stewood1000]

@retpyrc Your a good listener.

[MachineMezziah]

@retpyrc You'll find out at 1:00 and the next minute or so =)

[TheBig117]

@retpyrc because he likes bananas.

[daol03]

i love your work so far, it has been a fun ride to see the empty case and now it's full with stuff. and the case is a beast :)

[xRevelations1]

Hey i really need help, i just put together my new system, Core i5 2500k, Asus maximus z68, 16Gb Corsair vengence 1600Mhz... But when i look on Cpu-z the RAM is only running at 800Mhz and on AI suite II its saying the same thing. I went into the Bios and changed the frequency to 1600Mhz but it hasn't done anything, any help please

[thesinzia]

@xRevelations1 beacuse its Double Data Rate, 800 x 2 = 1600

[MiseryIsMajesty]

@xRevelations1 Your RAM is dual channel, meaning it has two sticks running at 800MHz, totaling 1600MHz.

[Baraquiel62]

I wish I could have all that your really rich =(

[TylertheGeek28]

Great looking rig, I forgot u were running 480 rads for some reason i thought u were running 560 rads. Looking forward to the temps. With me being broke watching this video made me feel like crap lol nice work though on the build

[CaseyKCasey1]

quad sli this rig

[pointblack1000]

great video ! I´m definetely looking forward to your watercooling tutorial :)

[ravyxxs1]

hI DUDE,how you can use two power supplies ? where is the bitspower x-station for psu ???

Another thing,why you can't use the bitspower fitthing on "IN" d5mod kit bitspower on radiator bottom ? do you prefer directly connect the out of your graphic cards in the reservoirs ? what is the difference ?

sorry for my english i'm from paris ;) .ty for the answer !!

[SingularityComputers]

@ravyxxs1 I explained it in detail in the build log. I have another custom dual power supply starter.

[brodysstuff]

@SingularityComputers i just thought id tell you being that i love your vids and the way you do things is great that the waterblocks for your motherboard have just arrived at pc case gear well for pre - order anyway

[Jebus63]

it would be awesome if you filled that blank spot in the top right of the case with 2 or 3 SSDs. You got enough room plus the hole for the sata cables. looks like there is holes for the screws as well, if not use some double sided Velcro tape.

[SingularityComputers]

@Jebus63 Actually that is exactly what I have been thinking. Some Corsair Force GTs would look very nice up there, I will do RAID 0 with them.

[frozenskipper]

@SingularityComputers i think that's a great idea, that's what i would've done personally if i had the money :)

[TLC673]

Love the sound card, I was planning on getting it and I just watched your video on it, definitely buying it now as I'm getting the same speakers as well.

I'm really enjoying your build logs, keep them up :)

[Peanutsreveng3]

So, you don't leak test before powering up the system?

Wow, that's 'brave'.

[SingularityComputers]

@Peanutsreveng3 I used to, but after doing around 100 different water-cooled builds almost all without leaks, I save time by not doing it any more.

[matawin2]

im jaelous... but ill feel good 3 years later when it will be all low end. well... the mobo, gpu and cpu at least

[connor124694532]

Sand the tabs off of the SLI bridge. It wont hurt it, its just a connector.

[jasonblake49]

@connor124694532 STOLE ME THUNDER! lol Sometimes the simplest solutions just don't click. Well his was simpler but sanding them is not far off.

[Peanutsreveng3]

Dude, ya gotta work faster, soo much time been spent checking for updates!

[SingularityComputers]

@Peanutsreveng3 Yeah I had trouble uploading it.

[leafboy412]

@SingularityComputers 2x GTX 590's are better at higher resoloutions.