wow ok my ? is what do you do if you have a four door sedan and they don't make a quarter skin for it i have a 71 impala sedan and whish some one did a video on the dog legs and ect.. love the vids
I have a 69 camaro that I am going to replace the trunk pan and floor pan partials. Do you recommend the car to be on all 4 tires or will it be ok on jack stands or a rotisserie?
@The69rscamaro I wouldn't recommend putting the car on a rotisserie when removing a lot of panels. You should put it on a body cart where the body cannot move and won't flex. If you're going to go through all the work it wouldn't be cool if it flexed.
@inkspray Don't like much about the paint stripper. I use it once a year, maybe. The stuff is bad for you, your neighbors, your water, etc. and rarely achieves the desired effect.
only up to the 1:48 mark and i see why in one of your current video's you mention you you rather the body lift to a rotisserie ,, will keep looking i am trying to see diffident methods of lead fill removal as it might be more work but the old quarter i am trying to remove in one piece as much as possible , do far from the factory there is lead in the sail panel i knew that but there is also lead in the door jam , measure 3x cut once
Hey, 3z. I'm Chris. That's my hulk in the video. We had them do just the shell from the firewall back w/o the doors or deck lid and had them skip the roof and rear cowl since the sand would have warped them. We also had it on a rotisserie which saved some time for the guy blasting. One could expect to pay between $350 and $500 with it set up like this, I suspect.
What is the ballpark cost for having that sandblasted? Any problems having it done and what should you look out for? Maybe you can give us some tips. Hey I bet you miss the snow in Watertown.
what is epoxy primer?
FordFalcon1962nBlue 3 months ago
My friend Pete brought me here! Great channel.
mkingy1 3 months ago
wow ok my ? is what do you do if you have a four door sedan and they don't make a quarter skin for it i have a 71 impala sedan and whish some one did a video on the dog legs and ect.. love the vids
Mrheavychevy71 4 months ago
I have a 69 camaro that I am going to replace the trunk pan and floor pan partials. Do you recommend the car to be on all 4 tires or will it be ok on jack stands or a rotisserie?
The69rscamaro 5 months ago
@The69rscamaro On the suspension would be good.
jamesfreddys 5 months ago
@The69rscamaro I wouldn't recommend putting the car on a rotisserie when removing a lot of panels. You should put it on a body cart where the body cannot move and won't flex. If you're going to go through all the work it wouldn't be cool if it flexed.
extremejm2 1 month ago
What's the advantage of sandblasting vs. aircraft paint stripper?
inkspray 6 months ago
@inkspray Don't like much about the paint stripper. I use it once a year, maybe. The stuff is bad for you, your neighbors, your water, etc. and rarely achieves the desired effect.
jamesfreddys 6 months ago
only up to the 1:48 mark and i see why in one of your current video's you mention you you rather the body lift to a rotisserie ,, will keep looking i am trying to see diffident methods of lead fill removal as it might be more work but the old quarter i am trying to remove in one piece as much as possible , do far from the factory there is lead in the sail panel i knew that but there is also lead in the door jam , measure 3x cut once
vcval 9 months ago
@vcval Door Jamb, rocker. If you can do so safely I recommend filling the seam with lead on the way back together.
jamesfreddys 9 months ago
I like that lift
oldford65 10 months ago
@oldford65 Chief Streamliner it's a frame bench. Sure makes life easy.
jamesfreddys 9 months ago
I have the same model plasma cutter. I love it! I wish I had more steel to cut!
John
hiltman 1 year ago
@hiltman works good.
jamesfreddys 1 year ago
So I assume there's no chance of bending the chassis on the rotisserie since both 1/4 panels have been removed?
CoolasIce2 1 year ago
@CoolasIce2 Haven't noticed anything.
jamesfreddys 1 year ago
Thanks Jeff.
426john 1 year ago
Hey, 3z. I'm Chris. That's my hulk in the video. We had them do just the shell from the firewall back w/o the doors or deck lid and had them skip the roof and rear cowl since the sand would have warped them. We also had it on a rotisserie which saved some time for the guy blasting. One could expect to pay between $350 and $500 with it set up like this, I suspect.
webleyaz 1 year ago
What is the ballpark cost for having that sandblasted? Any problems having it done and what should you look out for? Maybe you can give us some tips. Hey I bet you miss the snow in Watertown.
zzzdogutube 1 year ago
nice work that should look good with those zo6 rims
Ls3guy 1 year ago