BlueOrchidMods Console Ring of Light Installation

[freerunning9z]

What kind if lights the controller mod lights or what and were can I buy the lights

[blueorchidvideos]

@freerunning9z - They are available on our website BlueOrchidMods com. All of the colors we offer will work.

[PBboy08]

What kind of leds are they? smd 0805?

[blib1blob]

How much would it cost to buy this already done and could i choose the colours?

[blueorchidvideos]

@blib1blob Check you PM Inbox

[thormx47]

The error lights dnt work for me. its weird

[blueorchidvideos]

@thormx47 check the polarity of the LEDs are facing the right way. You can also use a voltmeter to make sure the wire you connected to the Positive is generating a pulse to the 2nd negative for the error light.

[thormx47]

@thormx47 Okay at 1:32 wich side of the led is to the wire? positive or negative.

Thanks

[XvBobMarleyvX]

can u just buy the board with blue lights in it already? or will your xbox not reconize it and banned you?

[blueorchidvideos]

@XvBobMarleyvX You can buy seperate circuit boards and use them. Microsoft does not check for unique serial numbers with this component.

E-mail me if you are interested in one.

[SuperBrandango]

@XvBobMarleyvX gaminggenerations has them for like 20 to 30 bucks

[SuperBrandango]

@XvBobMarleyvX gaminggenerations has them for like 20 to 30 bucks, they also have bad ass controller shells.

[funny962]

Q: So to make the error you need to connect the negative of the red led to the large soldier square (THE ONE NO USED YET) and the positive to the common positive (the other square that is connected to the "green" led positive)?

[blueorchidvideos]

@funny962 Yes, to make the secondary error lights light up if there is an error, (RRod or if the AV Cable wasn't plugged in), you need to use the positive from the left side, by pass the smaller middle negative and finish it with the LED connecting to the right most point. As always, the proper polarity direction matters.

[geometrywarsiscool]

How do i know what side of the 3 points to solder the LED to ?

Also can i use some tissue instead of desoldering wire.?

[blueorchidvideos]

@geometrywarsiscool The diagram is available when you purchase from our webstore. As for using tissue instead of desoldering wire? Good Luck and let me know how it goes. Never tried it.

[geometrywarsiscool]

Lol thanks. I accidently like took most of the silver stuff off one of the three mounts, does this mean it wont work?

[blueorchidvideos]

@geometrywarsiscool The silver stuff is the solder. That doesn't matter. Its the copper mounts that you need.

[blueorchidvideos]

when you purchase from our webstore. See info box on the right to make a purchase.

[BATMANJDx]

were do you get the diagram? pdf file

[elatesword4xboxlive]

never buy a wireless soldering iron, the heat made melted the batteries in mine and its now only hot enough to to melt itself, i should have got a wired...

[tanz957]

how easy is it to screw up putin new ledz on???

wat kan go wrong doin this???

[blueorchidvideos]

If you use too much force, you can break the mount off where the LEDs attach to. Then, that LED will not light up anymore. Besides that, you could burn the board, yourself, or anything else around you.

[tanz957]

if i take my 360 into the shop wil they do this stuff 4 me or iz it a elegal mod????wer do u get the leds from an the solders???

[blueorchidvideos]

I sell the LEDs on my website.

The link is on the right in the information box.

No it is not illegal to modify the lights.

David

[thormx47]

what kind of tweezers are those?

The ones i use solder sticks to them.

Ty

[blueorchidvideos]

They are made by tweezerman. I think I ordered them online so you'll need to Google it.

Good Luck