12-14-2008 Craigs 454 powered K5 Blazer bouncing the back end in the air trying the truck trap.

[acecaretaker1981]

hey there i live in arkansas to in heber springs but i was woundering where that mud hole is at there is no places around here to go and i have a 78 ford f150 step side with a 6in suspension lift and 3in body and 39 1/2 tsl's on it with a 400 if u could let me know where or any other places it would be greatly appricated thank u

my e-mail is acecaretaker1981@yahoo.com thank you

[sport454]

@acecaretaker1981 Its in Double Wells, Arkansas about 100 miles from you going south down through Pine Bluff. I am around 7 miles southwest of Pine Bluff on Sulphur Springs rd./highway 54

[1997petercar]

is this blazer street legal

[sport454]

@1997petercar it was at that time, I have made some changes to it now that makes it to big for legally street driving it. Here in Arkansas we have headlight laws so if I really wanted to I could lower the headlights and add different tires and it would be legal....but not safe in my opinion. So its not going to happen...lol

[1997petercar]

@sport454 I have a friend neither one of us is able to drive and he is telling me that if he has a jeep cherokee pretty muck stock and I had an 80's silverado with a 454 and 44 inch tires that he could beat me any where. I could understand maybe on a trail that was small but he couldn't beat me in a mudpit or drag racing or some thing that has a lot of room could he?

[sport454]

@1997petercar No I dont think he is living in our reality...then again Jeep guys are that way...ha ha ha

[MrJesspatrick]

@LoNgBeAcHfIvEsIxTwO Stock SB mounts will work, but you have to use different alignment holes. Swapped a 350 for a 454 in an '80 Sub. Only issue was reconfiguring the exhaust...All in all, fairly easy.

[UmpquaOffRoad]

@LoNgBeAcHfIvEsIxTwO You can ask at the parts store for the big block mounts for your year blazer.

[bigcheifsmokempuff]

lol....face full of visor and chest full of steering wheel.......been there done that.....lol

[drifter5064]

that hole raped that driveshaft xD

[idiot199]

my damn stock '89 bronco II will go through that puddle.

[sport454]

@idiot199 ummmm lol? That hole is open 24 hours a day cuz I own it. Come on by and give it a try...

[idiot199]

@sport454 i cant now ive got my wheelie bar on there for the drag strip but maybe in the fall?

[surfing1234]

@idiot199

ya you faggett! come try it bitch

[jfo420]

@idiot199 your name speaks for itself!!!!

[SRVFa21]

@idiot199 Your stock bronco won't do shit in that hole. If you think it will, we will be more than happy to film your POS going under water in that hole.

[guadi24]

@idiot199 YA BULLSHIT dude those stock bronco II's are gutless man...i could beat one of those on an 18b speed with a back flat tire

[SDR450R]

My eyes playing tricks, is that pumpkin on the wrong side?? What other mods?

[SDR450R]

@SDR450R - oh nevermind, i read your other posts.

[Mr390cid]

@SDR450R He is probably usin a ford d60 in the front. Also possibly using a t-case from a 1992 or newer chev ... but im just guessin.

[sport454]

@Mr390cid right on the Ford D60....up front...but it was a Ford NP205 adapted to the th400 with an Advance Adapters kit.

[sport454]

@LoNgBeAcHfIvEsIxTwO

The 454 will use the same motor mounts just fine..

[6Camel6Finger6]

ive done this with a bronco ll lots o fun!

[Paixaocolibry]

nice .... chevy all the way....

[barharnowen]

that thing is SICK i have always wanted to build a blazer

[coolguy125]

yea im try to get a 454 carb so i can get rid of this tbi bullshit

[coolguy125]

what year is that k5 hope it wasnt 87 with that stupid tbi  my sierra has the tbi worse shit ever

[sport454]

85 no TBI for me thanks....lol

[klemishz]

what kinda mpg does it get

[sport454]

This one gets Gallons per mile....lol

[Bigmanghs03]

This Is IRONHORSE from K5 Blazer you need to hurry up with your up grade I am ready to see the 2.5TONS IN Action!!

[sport454]

I am working as fast as I can...lol

Sucks having a full time job. I am headed out the door to go rebuild the TH400 now.

Wont be long...

[jstrout91]

what front axle you running noticed the pumpkin was on the opposite side?

[sport454]

Running a Ford High Pinion Dana 60 with Chevy outers, using a Advance Adapters kit to adapt a Ford NP205 to the TH400 transmission to get a drivers side drop for the front end.

[k5blazer66]

hahaha, kick ass

[iansmethurst1987]

personally my favorite of the full size SUV's

[Idaho4x4Bronco]

YAY !

[nosman69]

whoa man!

what all broke on the truck when that happened?

[sport454]

Well nothing should have broke, but my lack of maintenance and three loose bolts on the front drive shaft resulted in it letting go at the transfer case. I replaced the bolts and the CV centering yoke and all is good again.

[nosman69]

Sweet. Ya, if everythin' is tight and maintained then a Chevy will take any abuse thrown it's way...

[sport454]

Yea I am thinking a root or stump...had that area clear cut a couple years back. I am going to drain it this coming spring and get a track hoe in here and do a little digging..

[dbzgt545]

damn Bro, there gotta be a stump right there or big ass rock, to stop ya like that.

TRUCK still kicks ass bro.

[KILLAKON5]

hahah magmount what u must like jeeps

[magmount]

that chevy sucks. boring vid.

[sport454]

Its ok...cuz everyone knows Magmounts cant hold on during excessive speed or handle excessive pressure either.

[magmount]

chevys suck.

[dbzgt545]

you VID suck way more bro, just plan GAY