Added: 5 years ago
From: cruzen
Views: 19,006
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (145)

Sign In or Sign Up now to post a comment!
  • Bogs like SHITT holy crap, clean carb, timing, things of that nature. P.s stop beating the shit out of it

  • Pro goon

  • well its a piece of shit any way you may has well have bought a decent second hand japanese bike for the same money then that pile of shit would have cost you

  • sounds like my lawn mower :D

  • Dude stp reving it lyk dat on a cld start nd cln ur carb man nd Jett it

  • NO throttle response its a pit bike NOT A KTM

  • the problem is your bike is made in china

  • you timing is off

  • keeps reving the shit out of it and u well c a bigger problem

  • i'm thinking you might be part of the problem

  • @199cr125199 lmao i was thinking the same thing!

    dude i hope a lesson learned. get what ya pay for!

  • thats not a problem i got a probem my piston i in 1000 pises

  • No wonder there's a problem, its a Chinese first of all and your revving the shit out of it.

  • There's your problem.

    It's a chinese piece of shit. They aren't meant to run lol.

  • I am a car guy know nothing about bikes, but sound like a cam timing issue if it was a car

  • The problem is you bought it at pep boys.

  • Chinese bikes rule! TBH your lucky it wont run. it will only hurt or kill you anyway.you cant call that thing a bike.

  • a dirty chink owned u

  • also dont hold the throttle pinned just at idle... that could be the reason its screwed up

  • the carb needs cleanin and the engine needs a run through

  • its because u brought a pice of crap off brand

  • the problem is that you bought a cheap ass bike

  • cdi problem man dosen't look old enough to have gummy jets unless u left old gas in it through the winter but still souldn't run like that

  • first thing is you rev the shit out of it when its cold and you bought a pice of shit from china!!!!!!!!!!!!!!!! FUCK!!!!!!!!! ppl dont know anything!!!!!!

  • dont get a chineese bike

  • had the same problem with one of these ended up being dodgey wiring loom cheak yr cdi box and make sure thers no burnt out or loose conections. it fixed my problem, i had the carbs out about 10times thinkin it was dirt, ended up being a dodgey spark!!

  • clean carb and more gas i thinks

  • Your carb needs to be cleaned and re-jetted

  • time for a carby clean..

  • give the hamster in the engine more food

  • its bcuz its a shit bike!!! get a real bike

  • stupid bike not worth anything made in china

  • Mate shit bike made n china,not worth repairn dude b woth more than whole bike,take it 2 steel factory 4 pocket money,or change 4 bread n milk!

  • hehehehe thats make me laught..!!!!

  • yeh clean the carb, what a shit wee bike u look like a stick insect

  • 3 words knock off brand

  • goddamm kid, its a chinamen look alike. an your revin the shit outa it.

  • kid are you fucking stupid!?

  • opening the throttle to the rev limeter dont help the bike at all,it sounds like your valves.you damaged the bike by your overev,now go buy a new one to abuse

  • I had this problem with a similar chinese CRF-looking piece of crap... i cleaned the carb and jet and it did the job.

  • Thats normally what happens when you buy chinese and not jap.

  • 1. Clean carb/ Jetting

    2. Smaller air filter

    3. Spark plug or stator

  • None

    4. Full revving it on a cold engine, blew the bottom wnd of the engine.

    It's worse than reaching it's limiter for 10 minutes.

    Also you'll need a new engine / New bottom piston enjoy!

  • I mean end not wnd.

  • could be that if he does that all the time but if he was just trying to show the lack of throttle response it was one of the three I stated lol. I doubt if it ran like that, that the bottom end was blown though.

  • Mine ran it was until you tried to pull off it'll stool, have no power even tried full rev, letting the clutch out slow, still had no power, it sount like this one, no power and stuff.

  • its cause its a fuckin Chinese chode bike

  • clean ur carb n new spark plug and it should run fine

  • its a cheap akuma assassin mark 1 there shite.

    thats y it doesn't work dum fuck

  • Cheap piece of crap is your problem

  • you need a new spark plug and good gas and buy a GOOD fuel filter not a 2 doller one then your bike should be good

  • stator

  • my old one did that i changed the stater plate and it solved it if not strip the carb dwon and clean it all up :)

  • check your fuel to could be bad gas or old gas

  • Check your flywheel (maybe its loose...ignition will be wrong), your carb and your coil.

  • CARB

  • chinese piece thats why

  • clean up your carburetor man, you have dirt in it

  • ya i no shit i have 2 yamahas 1 honda and a skidoo snowmobile and i no shit go fuck yourself

  • ya right you goofy little fu k

  • i got a honda 125cc never had a problem with it and is that a ktm

  • lol u dont own a bike if u owned a bike u would no u fucken wanker. grow a fucken dick.

  • your jets arent adjusted right on your carb

    thats elementary

  • wanna solve the problem? buy a honda.

  • get a hayabusa twin turbo

  • watch his thumb at 0:41 hes pressing the kill switch there isnt any problem with the bike

  • ya your right. what a dumb ass

  • Bikes are Bikes all bikes brake Who cares what make they are..?

  • its the coil it happend to my bros bike only a few quid nothing major

  • Find your coil! follow the sparkplugwire

    and one one the cables are loose, and wil cutt the ignition. Se if they are loose!

  • the problem is its a piece of shit chinese bike... sell it and get a real bike please

  • throttle spring in carb is jamin along wae throttle cable

  • sounds like its running lean. get a bigger main jet.

  • I think the problem here gentlemen is the economy

  • AIr/Fuel ration is wrong. turn the screw all the way in and back it out 1.5 turns and try it then. usually its close but fine tuning is needed. After that check your jetting

  • trottle jaming dude just fix it and it will be good

  • or taiwan bike :):):)

  • china bike hahaha

  • buy new engine on allegro xD

  • the problem is that the bike is a shitbox, here is my advice sell it on ebay and get a nice ~ 2000 125 two-stroke

  • good old china carbs!

  • throttle cable is busted

  • the calburator is moungted fail an the eingne cant get enougt fuile chek the fuile pipes i had the same problem once before my gass pipe was stuck in the filter

  • Your Trottle cable maybe, if you could explain the problem a lil more

  • it looks new i think you are a litle dumb about bikes

  • if its a china bike then that explain everything

  • adjust ure carburator. set him to low.

    and u have probably some water in ure oil.

    chek always ure magneto tooif u want trick mail me . since 6 years,i've been buying this littles shits and never had problems whit that.but u have sme things to know

  • sounds like carb problems to me...

  • wow is everyone here serious. thats not even the sound of his bike. look at his throttle hand and listen

  • the video is laggy your fucking retarted

  • lol you ppl are stupid..... the sound and video is off by a few seconds. watch when he starts it. ha

  • Almost all the bikes we have in the states are from overseas...

    besides harley, and a few other roadster's.

  • all chinese bike have probleme !!!!

  • no spark alot of the time. little electric box under tank chsck for loose connetions or get a new 1

  • what air filter is it.. cuz if its custom then its not getting enough air. take it off for a while. and then buy a new 1 mabey

  • Go buy a real bike and not a disposable Chinese piece of crap. My dad is a pro mechanic, and to him these bikes are the same as disposable cameras at the market.

  • throttle cable is sticking

  • my yamaha did the same thing, so don't say it's only vause this is chinese

  • maybe somethin in the ignition? chinese bikes are crappy tho! save ur money and buy an xr 100 or somethin ur only a kid but maybe a klx 125 or somethin

  • i know wat the problem is..

    its a chinese bike so its shit.

    hey man im giving u advice..

    chinese bikes r shit and fuk up all the time

    if u want ur bike to last make shore its japanies. thats yamaha and all that.

    its more expensive but the bike will last for ever.. but the chinese bike will last for like 2 seconds

  • not really... watch my video of "glowing exhaust burnout" its a loncin 125cc pitbike worth $1200... it done burnouts untill the exhaust was glowing blue so not all cheap chinese bikes are shit mate

  • what a piece of shit why do they even make chinga bikes, they suck massive cock. sounds hilarious

  • dirty carburator

  • lol that out of tune

  • the problem is it is not a good bike no offence but its chinese junk

  • slide in backwards?

  • my xr100 did the same thing. lol

    there is a high and low rmp on the spark plug cap. (the high is gone) just buy a new one and put it on and good as new.

  • no sory. the flyweel looks like it is lose

  • check carb!

  • is tsunami the name of the company that makes that bike?

  • carb mabe jetting

  • ur carbi is fucked

  • get a real bike

  • lol its like a godzilla movie you give it gas and like 3 secs. it revs hahahaha

  • you have a prob! it is your fucking shit china bike! clean the spark plug and take apart ur carb.

  • thats exactly what i was going to say.

  • that is what you get for having a china bike lol you should blow out your exhaust and clean the carb

  • spark plug, probably. but spent a little more money and buy a real bike

  • first never buy a chinese shit then get a new one but if you want to fix it im guessing the spark plug im probably wrong but w/e

  • u need to take apart carb. and then fix idol lol u f***** up ur bike lol

  • ya u do have a problem the bikes a piece of shit

  • your air and fuel ratio is wrong thats why its back firing

  • i dont know if it is a sound prob with the video or if u are talking about the throttle response it happens alot with remote control cars take it to a shop and get it looked at its probably the throttle cable

  • its a chineese pice of shit buy a fucking japenesse bike and never worry bout that

  • shit happens to shit bikes!!

  • i think after the vid u blew up the engine :P anyway just clean out carb and change your fuel filter, clean out tank and DO NOT take the engine apart if you dont know what your doing

  • i had one kinda like this and i changed the throttle cable and it started doing this, it was because the clip on the cable and fallen out and the cable was going in to far and making it miss

  • if u open the engine thats it u fucked it

  • lol wut u need to do is throw that pos out and tell ur mommy and daddy 2 buy you a kawasaki.

  • Take out your engine and put in a honda crf50 engine, then swap the frame for a honda crf50 frame, then the wheels, bars, forks and everything else - then your problem should be fixed

  • lmao haha funny

  • haha lol go buy a new bike is that what ur saying

  • lol thats what u get when u buy a chinese POS

  • first problem its a chines piece of shit !!!

  • WTF SOUNDS AWFULLLLL

  • Dude same problem i had, just change the spark plug

  • good morning, I have the same problem as you and I shall want to know if you to repair it your motorbike? where from came problem? thanks for your answer

  • take your carb off and take it apart then put it in a bowl of petrol for a bit so all the oil and junk come off, come back to it put all the bits on a washing line and leave it to dry, then put it bck together and it should work. this happens quite alot with pocket bikes especially with off road bikes because of mud and dirt being splashed and kicked up.

  • its youre floats/jets/slide/cable sticking get carb cleaner spary it in the wd 40 for evrything else...might work might help//

  • worst comes to worst, take the whole carb apart, put it back together, you are bound to find any problems that way.......

    P.S if you leave gas in the bike for over a month, u may find that the old gas has turned to varnish at the bottom of the float bowl.check it out, hope this helps

  • nice bike

  • If it were my bike id first pull off that carburetor and check to see if theres any hesitation when you pull the throttle and the slide and needle come up and then fully off the throttle and see if it gradualy comes down, if it comes down in a fast motion its ok but id replace the cable if it sticks before any further diagnosis

  • nice bike

  • Wait, I didnt notice it was reving without throttle input. Or was that audio lag in the video playback? If not, look for an air leak between the carb. and the engine (bad gasket or reed valves).

  • Turn up the idle air screw a little.

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more