@sanimalscoolzfriend Its a camo paint, and its painted to either blend with desert or dead leaves. The quality of the video doesn't do justice to the quality of that paintjob.
@Hamun002 it still looks great even in a lower quality,I just wanted to know how you were able to paint it and them make it look all worn out as if it had been used for a long time and extensively
lol, if you take your bolt out, look at the fake fire pin see if there is a small e clamp is there, if not you need to go to autozone and get it. because with out it the nozzle wouldnt be able to go back it the sitting position.
other possibility could be that your hop up chamber is cracking. and you need to disassemble the front, ( barrel, hop up) PS. dont lose the small hop up spring.
i have that gun and the bbs fly everywhere when i shoot. they curve so much. What gas should i use? how should i do the hopup? any tips? magazine fault? please answer
@mcskatin I just started looking at my agm cause I got a game coming up, but if I do remember right the stock hop up that comes with the Agm m4 gbb's is a piece of crap. I know Ra tech used to have a hop up kit they sold which if you can find prob run you 15. But yeah, clean ur barrel if that doesnt work play with the hop up and if you cant fix it you prob need to buya new hop up unit.
Everybody must be so fucking retarded. Dang the paint is obviously crappy but, in Iraq and Afghanistan most soldiers who have thier weapons painted it's done with spray paint and I also have a non painted G&P WOC M16A4 and also have a tan painted WE M4 that got very messed up but, who cares.
@nakazatoGTR that would be the worst eotech in the world if it lost its zero from an airsoft gun. if the ten dollar plastic Ncstar can hold i would hope that the eotech can hold
You shouldn't use green gas with this gun, unless you upgrade it first, duster gas (Even though it gives a lower fps, but hey 300-310 isn't that low+it's nice for CQB) will soften the problem. You should also do what he's going to do and buy a better nozzle..
my agm crapped out after about 3 mags...the bolt carrier split where the clip located the bolt, replaced that with a prime aluminum one. i had a npas fitted, the first one was plastic which parted through the housing. replaced with an aluminum one also. had to do a bit of tactical fileing to get it working smootly tho. the plastic nozzle on the bolt has just sheared off, getting a brass part custom made. still like it tho! 500fps with top gas...ace!
his gun is an impression of a special operation m4 that would be used in iraq/afghanistan. they paint them to make it less noticeable from a distance, and paint wears so....
yeah? after this shit brake, you then have to replace almost every single part of this gun, like the western arms. so might as well build one urself. cost you around a grand or so, if you go with gp body, prime is 400 more.
yes, but what I am getting at is that it's not the tight bore or the pressure system that fails it's the internals of the gun that fail over time, the gun last maybe a year then it goes downhill from their. You have to replace the bolt and the rest of the system. Stock it fire inconsistent.
wheres the brake down?
KenshenSim 3 months ago
Guys, calm down. Its not really a camo. Its a paintjob. Could be considered a camo if it blends in lol. Enough with the "bad camo"
BiGHARYSCOTSMiN 8 months ago
how did you paint the gun in such a way that makes it look all ruined and stuff?
sanimalscoolzfriend 9 months ago
@sanimalscoolzfriend Its a camo paint, and its painted to either blend with desert or dead leaves. The quality of the video doesn't do justice to the quality of that paintjob.
Hamun002 9 months ago
@Hamun002 it still looks great even in a lower quality,I just wanted to know how you were able to paint it and them make it look all worn out as if it had been used for a long time and extensively
sanimalscoolzfriend 9 months ago
this is why i run a kjw m4
theme57 10 months ago
Mine did that aswell ... nothing serious tough
Strikerz0r 11 months ago
lol, if you take your bolt out, look at the fake fire pin see if there is a small e clamp is there, if not you need to go to autozone and get it. because with out it the nozzle wouldnt be able to go back it the sitting position.
other possibility could be that your hop up chamber is cracking. and you need to disassemble the front, ( barrel, hop up) PS. dont lose the small hop up spring.
41ACE 1 year ago
would u recomend this gun i heard its not that great please answer back
duperman91 1 year ago
is this gun even any good?
marineman825 1 year ago
nice it look likes the one in medal of honor tier
TheBlabla1996 1 year ago
the word is "break" not "brake". Then again, you didn't break it down.
csmybuttt 1 year ago
WTF happened 2 ur gun
AuburnFootball44 1 year ago
@AuburnFootball44 i think thats called a paintjob
Killasniper232 1 year ago
my bolt did that exept it ended up completly exploding in my face...the bolt i mean
spiker84 1 year ago
@spiker84 deadly?
TheBlabla1996 1 year ago
@TheBlabla1996 deadly fun my friend
theoriginalwickfish 7 months ago
ugly color camo, haha
stonefosho 1 year ago
@Fox11010
A 6.01 tightbore is made to increase fps not accuracy, if you want great accuract you should get a Prometheus 6.03 barrel
RYDERkN 1 year ago
ya that same exact thing happened to me with the air nozzle
MrBigfatturd 1 year ago
i have that gun and the bbs fly everywhere when i shoot. they curve so much. What gas should i use? how should i do the hopup? any tips? magazine fault? please answer
mcskatin 2 years ago
@mcskatin I just started looking at my agm cause I got a game coming up, but if I do remember right the stock hop up that comes with the Agm m4 gbb's is a piece of crap. I know Ra tech used to have a hop up kit they sold which if you can find prob run you 15. But yeah, clean ur barrel if that doesnt work play with the hop up and if you cant fix it you prob need to buya new hop up unit.
schoolkid1001 2 years ago
This has been flagged as spam show
fuck u all
masbator 2 years ago
I'm so building my AGM M4 GBB after yours I like man I realy do. The weathered look looks awthentic an makes the gun look badass. Five stars
Ginjew90 2 years ago
Everybody must be so fucking retarded. Dang the paint is obviously crappy but, in Iraq and Afghanistan most soldiers who have thier weapons painted it's done with spray paint and I also have a non painted G&P WOC M16A4 and also have a tan painted WE M4 that got very messed up but, who cares.
ktmracer3500 2 years ago
does your eotech lose zero with all that recoil?
would tasco 1x30 survive?
nakazatoGTR 2 years ago
@nakazatoGTR that would be the worst eotech in the world if it lost its zero from an airsoft gun. if the ten dollar plastic Ncstar can hold i would hope that the eotech can hold
Wabaanimkii 1 year ago
You shouldn't use green gas with this gun, unless you upgrade it first, duster gas (Even though it gives a lower fps, but hey 300-310 isn't that low+it's nice for CQB) will soften the problem. You should also do what he's going to do and buy a better nozzle..
AwesomelyEpicMan 2 years ago
what kind of eotech is that
TOMMYGUY99 2 years ago
What brand is that RIS on the agm m4? Or is this AGM's RIS version?
driftinsti 2 years ago
my agm crapped out after about 3 mags...the bolt carrier split where the clip located the bolt, replaced that with a prime aluminum one. i had a npas fitted, the first one was plastic which parted through the housing. replaced with an aluminum one also. had to do a bit of tactical fileing to get it working smootly tho. the plastic nozzle on the bolt has just sheared off, getting a brass part custom made. still like it tho! 500fps with top gas...ace!
ailifelike 2 years ago
Sticky I found over 20 sites with every parts of that agm gbb fir sale.
Complete agm bolt $30
Upper and lower $45
Ra-tech complete cnc bolt $250
So don't be a tool.
shadowblack1987 2 years ago
I haven't got shit on my face unlike you.
And anyway I've never ever seen any troops in Iraq/Afghanistan with that on their guns so WTF !!!1
CRC1770 2 years ago
Your an idiot
LazyWaffleman 2 years ago
who the fuck are you why dont you just stay out of this you fucking dick head
CRC1770 2 years ago
Why have you covered you'r gun in shit ?
CRC1770 2 years ago
why have you covered your face in shit?
his gun is an impression of a special operation m4 that would be used in iraq/afghanistan. they paint them to make it less noticeable from a distance, and paint wears so....
animalmoth3r 2 years ago
broke down?
Oxstayne 2 years ago
thats what you get for buying cheapo chinese shit.
41ACE 2 years ago
ya i considered buying this, but i didnt want to have replace everything in it so im going with KJW M700 for now
Oxstayne 2 years ago
yeah? after this shit brake, you then have to replace almost every single part of this gun, like the western arms. so might as well build one urself. cost you around a grand or so, if you go with gp body, prime is 400 more.
41ACE 2 years ago
That M700 will eventually break down and will not have replacement parts for a cheap price.
The parts are so hard to find... and when you do find them they are from an over seas seller, so good luck with that gun.
Stickyittoyou 2 years ago
yeah im getting a 6.03 tightbore and im lok for a new hop up and the CO2 system
Oxstayne 2 years ago
yes, but what I am getting at is that it's not the tight bore or the pressure system that fails it's the internals of the gun that fail over time, the gun last maybe a year then it goes downhill from their. You have to replace the bolt and the rest of the system. Stock it fire inconsistent.
Stickyittoyou 2 years ago
ya i know i plan on buying the G&G power bolt.
Oxstayne 2 years ago
The back of your loading nozzle is cracked and is about to break off. Get a replacement ASAP. It's the whole white part.
Nice gun by the way...
-Luis
LuisG2185 2 years ago
Hmmm det känns som att min kommer att göra det oxå :P
Knacke30 2 years ago