I hade that problême after a big crash 3 our after i received it and i discover that my rear blade was loose. The litle black rober that keep the blade near the moter get loose so i have put some glue to to stop it moving. And the litle gold washer near the moter, so a put it on the other site of the blade so the blade now is more solid in the motor. Sorry for my english. Hope it il help you guys
Got a new motor from hobby king and is working fine now. If you plug the wires in the wrong way it will spin. Hobby king motors are about 15 bucks and not walkera but walkera tail motors dont seem to last
Mine started doing this after a crash. I swapped all the components from my 43b ( both esc's, receiver) and it still did it, checked the front motor was not too tight or loose but nothing helped. Someone else complained of this happening, it seems the motor has had it. I have ordered a new one, you can get a superior motor from wow hobbies
tail motor has got to be damaged or shot. even though it spins, it could still be faulty. can you hold the rotor bell and turn the rotor? meaning to check if the blade is loose. . . good luck - always a bummer when something like this keeps the model grounded.
the person behind the transmitter xD
ipadize 4 months ago
looks like a weak sodering joint in the tail motor
kxyzrider22 6 months ago
reverse the tail rotor direction, change the direction of the input
johnnyboypdq 1 year ago
Turned out to be a faulty tail rotor. Works fine now after changing it.
Silaxe1 2 years ago
Twisted hair on the tailmotor?
wbayw 2 years ago
let us know what the solution was
billmuir 2 years ago
mine started to do just that
diagnosed the problem as broken connection to the speed controller (solder had failed)
most prob that as opposed to faulty motor
could also be as previously mentioned tail rotor loose - super glue rubber gromit
hope it helps
billmuir 2 years ago
Could be:
Bad Tail Motor
Bad Tail Blade
Gyro WAY out of tune
Controller Trimmed really far to the left
Bad Tail Motor ESC
TheRoostCrew 2 years ago
I hade that problême after a big crash 3 our after i received it and i discover that my rear blade was loose. The litle black rober that keep the blade near the moter get loose so i have put some glue to to stop it moving. And the litle gold washer near the moter, so a put it on the other site of the blade so the blade now is more solid in the motor. Sorry for my english. Hope it il help you guys
ferlandphoto 2 years ago
did you check your gene on the gyro
TheZipper380 2 years ago
I'm just wondering, Does it lift off at all?
wkialyleiam 2 years ago
change the speed controller of the tail motor.
aye2000 2 years ago
I don't want to sound like the jerk... but did you trim it?
Not meant to be insulting, some people don't know, I didn't know till I watched a bunch of guide videos.
TheRoostCrew 2 years ago
Got a new motor from hobby king and is working fine now. If you plug the wires in the wrong way it will spin. Hobby king motors are about 15 bucks and not walkera but walkera tail motors dont seem to last
C4eternity 2 years ago
Mine started doing this after a crash. I swapped all the components from my 43b ( both esc's, receiver) and it still did it, checked the front motor was not too tight or loose but nothing helped. Someone else complained of this happening, it seems the motor has had it. I have ordered a new one, you can get a superior motor from wow hobbies
C4eternity 2 years ago
unplug the tail motor wire from the tail ESC. It may be plugged in the opposite way so turn it around and plug it back in. Might help.
1May1984 2 years ago
tail motor has got to be damaged or shot. even though it spins, it could still be faulty. can you hold the rotor bell and turn the rotor? meaning to check if the blade is loose. . . good luck - always a bummer when something like this keeps the model grounded.
ultragroove1 2 years ago