line-x complete inside and out gmc k5 blazer reving

[85oscarin]

Nice truck man. I just bought an 84 gmc like that one.. Cant wait for the summer.. I need some help.. Im about to put an exhaust but dont know what to use. I want it.to sound nice. What u guys recomend???

[markunit72]

how did the liner hold up over the years?

[motorromp13]

hey man im thinkn bout doings this to my truck what does it all require do you have to order this specific brand or can you use the stuff at the store??

[ImaTruckKindaGuy]

looks like spray paint

[0122358]

hey how wide are your 33s? they look like 12.5s?

[wtfshit1]

THAT IS BY FAR THE SICKEST K5.

[Cyrus057]

Sick Blazer bro! How much did it cost you to get a full body line-x? I'd love to do that to my Blazer.

[penguingt]

hey is that a custom grill? i need a new one and i was wondering if u could tell me what one it is

[trac0808]

how are those maxxis bighorns do they hold up well on road i might be gettin a set in 33 12.5 15 on my jeep and its a on and off road vehicle so just wonderine if they are worth the money

[destroyerzx1]

@trac0808 i like em bought them for off roading and taking my jet skies out i used my car for everything else but when i moved to az it became my main vehical an i have put 4000 miles on it driving back and forth moving my stuff, so far there holding up real well, only thing i wish i did different was get wider rims

[XxClemsonTigersXx]

@trac0808 i got a set og bighorns 285/75/16 on my silverado and i've put 7000 miles on them and so far there holding up pretty good, they don't harldy make any humming...all in all just a good tire!

[xxchimpyxx]

@trac0808 i got a set of bighorns on my 01 dodge and they're great in mud and on the road. i havent gotten to try em out yet in snow and the only downside is they pick up a lot of gravel and dont get rid of them haha

[jpcs302]

Now Just under coat the bottom half....

[destroyerzx1]

@jpcs302 ya that would be cool but a lot of work, would have to remove every thing sand blast and clean the surface then cover all the holes coat it take masking tape off stick everything back just dont feel like, itd be easier to buy military one cause they come fully coated

[wheaties1993]

im thinkin about gettin a set of these tires, i got a deal where i can get a set r16 265s for $500. would any of u recommend them?

[PullinEasy]

GMC didnt make a blazer their version was called the GMC Jimmy

[destroyerzx1]

@PullinEasy I know but there the same thing

[zizwop]

I had two friends with these-one was the GMC, the other was the Chevy-mid to late 80's, and I was always really surprised by how well they did off-road, even in tight spots. Covering your whole rig with Line-X is also not cheap-if you're friend gave you a deal you're lucky. I like it. 

[danscomprider]

how much did those wheels cost ya? and whered ya get'em?

[destroyerzx1]

@danscomprider I got them at les schwab's there maxxis big horn and cost wise I only had to pay $461 but there about $180 or so apiece

[MrRknapper]

@danscomprider And if your on a budget you can go with the cragar soft 8 steel wheels. They have the same look. I paid $75 a piece for my 16" cragars.

[powercord1]

nice.

[javierneptuno]

undestructible coating, that was genius

[pozzerbob]

I want to do this to my tundra

[KIAdarktide]

Get a ford.

[onewheelwonder1000]

@KIAdarktide so it can break down

[destroyerzx1]

@KIAdarktide honestly this is the lamest comment I have seen, If you took the time to look at my other video's you would see that I already own a ford but thats really indifferent I already have time and money into this rig why would I want to start over? plus I got it for one hell of a deal.

[KIAdarktide]

@destroyerzx1 i posted it 5 months ago and you're just now saying this??

[destroyerzx1]

@KIAdarktide nothing gets by you

[chriswantsbeer]

how much did the linex cost you? i am trying to get my wrangler done like this.

[destroyerzx1]

@chriswantsbeer truck cost me $1200 I dunno how much it cost to line-x though. my cousin used to work at a line-x shop and he did it himself. go to a shop and see what they quote you.

[3R1CD4V15]

I think you coulda went bigger on the tires.

[destroyerzx1]

I could of but thats what they had in stock and thats what i could afford at the time.

[3R1CD4V15]

oh I got yeah.  Yeah moneys tight for me too. Hows the paint holdin up? A buddy of mine used rhio-liner on a mercedes... LoL it was black with Red racing stripes(all bed liner) after a year or so it faded to like a grey and pink...

[destroyerzx1]

ouch thats a bummer. mine still black doesn't appear to be faded if it is it ain't much lets put it that way. hardest thing really is washing it, I use a commercial steam presser washer to get it clean. I think its been linex for 2-3 years or so we'll see what the future brings.

[hudson600]

how much did it cost to get the whole exterior linexed

[destroyerzx1]

not sure my cousin used to work for them and got the materials for $400 and sprayed the truck on his day off

[balda2000]

Nice one. 33s look small on it though. =)

[michael70h7]

ok cool, now drive it through a sword bush and see it everything goes. when your done let me know how it all panned out

[destroyerzx1]

deal

[6rkidzx]

@michael70h7

whats a sword bush lol and what will happen ?

[bawlsinjs]

thats ok but a tacoma is way way better than that!

[mightyjoelaith]

That suspension isn't stock is it?

[destroyerzx1]

whats that have to do with anything

[mightyjoelaith]

I was just curious. I'm doing a lift on my k10.

[Letsmakeasamich]

Nice! I've seen bikes with coats of rhino liner on it and I have a shotgun that has a coat of it. Tough as nails.

[cjlamberson]

cool. i want to line a sububan outside. do you just pressure wash it? does it make it quiter inside or make sound echo?

[destroyerzx1]

a steam pressure washer and simple green is the best way to clean it as far as sound I'm not sure didn't own it when it wasn't line-x'd

[C0LEgasmaxx]

how much did that cost you?

[destroyerzx1]

didn't cost me anything bought the whole truck for $1200, my cousin used to work at line-x and it cost him $400 for materials retail I have no idea ur gunna have to get a qoute

[C0LEgasmaxx]

cool! ya i was looking into getting it done on the wheel wells and trim on my jeep cherokee not the whole thing!

[mickblock]

That's a good idea.

[GSRGOPEDRIDER247]

sounds great, looks great, nice truck. are those straight pipes?

[chikotube]

that exhaust is perfect

[foolsonparade]

haha me and a buddy thought about doin that to an old silverado. Except we were gonna line x the whole thing except the bed lol

[TSxUCEHADOUKEN]

im in the process of doing my 91 S-10 shortbed standard cab with HERCULINER. THE WHOLE TRUCK ITSELF.. CAUSE IT CHEAP AND BETTER THEN LINE X..DO RESERCH FRIST.

[Kriswixx]

what's cheaper than Working for the company, and getting free product in offtime, probably got the bosses giggle to do it to. Do reasearch first. Heh. use the internet much?

[tpvalley]

WTF is line X?

paint?

[xratedpk]

bedliner

[billiondollardan]

linex is like a spray on vinyl or something akin to it. people use linex, rhino lining, duplicolor, and tons of other stuff on the market now on areas that get heavy wear cuz the stuff can take a real beating

[steve93lm]

I think you have head problems kid. There are doctors out there that can help you!

[antman1978]

very nice...

[WickedSickMetal]

Nice truck Bro! I had an 83. Sounds great. Buying another one the summer. :)

[jhsknight2008]

what does the inside look like???

[0Gibson0]

what engine is it?

L35?

[jadudleyjadudley]

no offense but its not a K5 its a jimmy if its a GMC btw i would be cool to see the inside too plz and how hard is it to clean?

[destroyerzx1]

i know but there the same thing with a different name

[rudedog79blazer]

How many cans of line x did you use to do it? And is that line x a rough surface or smooth? I want to do the interior of mine but not sure if i'll do the outside. And what exhaust is that? I just scored some 40 series flows and want to know how it will sound.

[destroyerzx1]

i don't know how much line x it took but i know at wholesale it cost $400 just for the material go to your local line x shop and get a qoute for what it would cost. its a rough surface they'll also have samples of it at a line x shop. the exhuast is 3" pipe from the cat to the back.

[dbzgt545]

nice ride man, looks a bit like my skull crusher check it out. =0) lovin the line X Alot

[antonyr123]

First view!! fuck yea!! Sounds sweet