WILD TUNING CARS - Carbon Fiber Trunk Process

[unnamed15rus]

buy good camera lol

[NTGam1ng]

Lying naked on the floor, manly music you guys got going on in this video lol

[iixxBlack0utxxii]

funny stronger than stell but you can cut through it with a knife

[1106SMOK]

What theyre doing here is known as 'wet carbon', it's exactly the same as working with fibreglass. I knew someone that did all the carbon fibre stuff with the Benneton F1 team and they used a technique known as 'dry carbon' Now thats the real stuff !

[tkcwu]

Go Natalie!!!!

[antixs092]

After resin infusion what process is next. How would you dry it if you don't have an autoclave or oven.

[Tj1056]

@antixs092 you just let it sit like paint...

[JohneySoQlose]

cool process to think about, extremely weak video...

[barkingdog3107]

amazing work...hats of to u....m gonna begin doin my carbon fiber work for my car...but i wanna do it at home only....hoepfully i can do somethin good..

[OldHolborn24]

paidia, peite mou pou mporo na valo carbon sto mixanaki mou. Meno Athina. please apantiste.

[6mimis]

poli wraio re mages! bravo!

Pou mporw na vrw kai egw ta adistixa ilika xereis kanenas?

[qAyyUm]

wat does carbon fiber protect from?

[rikino2009]

carbon fiber make it lose weight kg

and it protect from fire its unflamable and really really hard like metal :P

sorry my english are bad i know.....

[omsigbug]

ρε πατριωτες που θα σας βρω να καρβουνιασω κατι πορτουλες για το 8 που δεν μπορω να βρω πουθενα αξιολογης ποιοτητας????

[williamfoubert]

Ya this is how it is done, this ia what i do at work to same prosses and same steps, these guys know what the doing...

I also work with carbon composits and I like your trick to make straight cuts Pulling out the Thread at 0 degreas, Nice trick i will have to use....

[DrAgOnBoY63]

Its an RX8's hood wow I LOVE YOU RX8 you are my dream :)

[mojorossi]

natalia imbrulgia - torn ... dat keeps dem goin.

[NOKIA50000000000]

afto einai ali8ino carbon???

[omsigbug]

@NOKIA50000000000 δεν υπαρχεο ψευτικο φιλε μου...υπαρχει το ανθρακονημα και υπαρχει και το αυτοκολλητο....αυτο απ οτι βλεπεις ειναι σαν υφασμα..πλεγμενες ινες αδρανους ανθρακα.Οποτε ειναι the real thing

[NOKIA50000000000]

@omsigbug popo apoti fadazwme panakrivo!!!

ala para poli elafri!!!

[omsigbug]

@NOKIA50000000000 ακριβο ναι αλλα ξερεις δεν πληρωνεις το υφασμα οσο την εργασια....το υφασμα ειναι παντα ιδιο ,αλλα ο τροπος εφαρμογης μπορειε να κανει την διαφορα απο ενα καλο και στιβαρο κομματι ανθρακονηματος με ενα σκατενιο.

Πληρωνεις 10% το υλικο και 90% το μαστορα οποτε παντα πας σε επαγγελματιες και οχι καραγκιοζακια που βγαινουν στο YT και λενε οτι ο μητρος πηδαει την γιαννη και κραζουν τους σοβαρους επαγγελματες

[NOKIA50000000000]

@omsigbug eisai para poli sostos!!!!



[xxsaranglubxx]

You're not supposed to run a brush across like that when applying the epoxy resin. It distorts the weave resulting in an unappealing carbon fiber hood. You're supposed to dab the epoxy on when working on the first sheet of carbon fiber. After your first sheet you can then use the brush to squeeze the epoxy around. The less epoxy you use, the strong the part.

[Bobbit323]

@xxsaranglubxx Exactly, and why aren't they working from the middle out?

[poutsa3000]

auta einai ellinika mastoriaaa!! : )

[uunleashedd]

rx8 carbon fiber hood

[craveman85]

why is it so lumpy in the middle?

[meandmyevo]

strengthening maybe?

[WestLosHomiez]

@craveman85 Its the bottom of the hood...

[shkssj88]

hi, i need a help!

i made some composite structure by resin infusion and it work well but after i have a problem ,,

when i spray 1-2 hands of clearcoat but i have the famous problem of pin hole in the surface!!

i try to degass the resin before to infuse. please, have you a solution for my problem? thank you very much

[96cobrakid]

while the resin is wet run a heat gun over it and it will pop all the air bubbles

[killersushi99]

RX8....thats a fail already! car needs more than a carbon fiber trunk!

[mimmymimmymim]

Torn, Natalie Inbruglia. :)

[Jaystring09]

lying naked on the floor;)

[atmospherejo1]

how did u ended this video the other part cause i saw the carbon width was not enough to cover all the mold.

[goomut]

hey dude, whats the name of that song that was playing??

and can u upload a video tutorial on how to make a carbon fibre spoiler?

[yunadezign]

Nathalie Imbruglia-Torn ;)

[bykashka75]

gay

[lester7c]

does carbon fiber decompose? because carbon is an organic material

[vladimir2277]

no, carbon fiber cloth is made of almost entirely pure carbon. the stuff that we usually see decomposing is carbon combined with other elements such as hydrogen, oxygen, etc. this stuff lasts.

[schaumsancor]

lol

[KAULAMANS]

den katalava to carbon dld einai etsi san ufasma to vrexeis kai meta stereopoieitai???kalo!egw vasika ena autokollito look carbon 8elw na valw sto 106 mou mono kai mono peeidh to kapo 8elei vapsimo.axsizei auto?8a krathsei dld to autokollito h na to vapsw kalutera?

[Loginasdfg]

do you guys use a presurised oven? or just let them dry out on the open?

thanks.

[kjun13]

a hood won't be exposed to a lot of stress, so you wouldn't actually NEED to bake it......but it would be a good idea.

[dvsferrarilover]

carbon fiber boot lids and bonnets are most of the time carbon fiber ovr fiberglass. About 90%+ of the time. The carbon fiber hoods that cost 4-5G are FULL carbon fiber.. and VERY hard to find.

[nfin8one]

OK, I concede that it is probably a mold. I looked at other vids too from them and, yes, it looks like 100% carbon fiber. My only question now is what are the rolls I see on the bench at 2.47? Looks like e-glass, but it's probably white carbon fiber, huh? I don't know what they would need e-glass for in a carbon fiber shop... unless they are using it to fill the back for strength, and using the carbon fiber for a top coat, like what is usually done.

[kazuyeahdog]

good catch at 2.47. It probably is eglass. I mean these guys aren't building f1 cars, so they may add glass to their parts. There isn't such a thing as white carbon fiber. Unless a company advertises 100% carbon parts, there isn't a huge reason to expect it. An all carbon piece would be much stronger than one mixed with glass, but the cost is prohibitive, especially for the street rodder that just wants the carbon "look".

[bestcarbonparts]

carbon is always black. You can not dye carbon. If anything is advertised a colored carbon it is a lie. As far as the glass, every carbon shop has fiberglass. We make our molds from it, use it on plugs, and also on prototypes.

[Einimas]

you can add collor to the resin

[dekonfrost7]

kevlar...this is an expensive piece....by using two different fibers you get to capitalize on the advantages of each one...you even hear him say kevlar....

[WildTuning]

Are you talking for our carbon parts in any of our videos?

[kazuyeahdog]

you are mistaken. that orange part is not a oem hood, it is a negative mold. These guys are making full carbon fiber parts here of very high quality. They will bond that section to the top part of the hood shown earlier in the clip to make it more rigid

[WildTuning]

At last someone knows what we are talking about. You are 100% right

[Grunta30]

@WildTuning how much would a roll of carbon fiber like that most likely cost??

[omsigbug]

@nfin8one the ''part'' is a mold....its not the actuall part

[TheJaekryl]

@nfin8one lol cuz like 3:05, carbon fiber vinyl is see-through right? dont talk if u dont know kthx

[Proloco47chev]

@nfin8one so should we not paint our cars either? cause, you know, its an expensive decoration that adds more weight.

[aelaran123]

@nfin8one You know, there is stupid costumers that want some kind of cool decoration ( waste i agree ) but the guys is doing there job good................!!!

[sobotica]

how is made carbon fibre sheet?can't find nowhere!it is possible to knit yarn on flat or cirk. machine? thx

[teamEP789]

gia mpakalides kaloi eisaste paidia...afiste ta carbon gi aytous pou kseroun...

[WildTuning]

Profanos milate gia esas? Exete kapia eteria ?

Emeis milame me apodikseis.

Gia peste mas eseis pou kserete ti enoite?

[omsigbug]

@teamEP789 πολυ βαριες κουβεντες απο εναν ανθρωπο που σαν ιντρο βιντεο στο καναλι εχει ο μακις ξεματιαζει τον μητσο η οτιδηποτε γραφει....Ποιος ειναι ο μπακαλης λοιπον? Το παραπανω σοβαρο βιντεακι η ο τακης που ξεκολλιαζει το πετρο η οτι σκατα γινεται στο βιντεο σας?

[teamEP789]

@omsigbug poly sovaro to epixeirhma sou mastora...

[Adode310]

hey i have a question were can i lean how to make carbon fiber parts???.. is there like a school for that or something?

[DecalfxVideos]

LOL

[RealZoc]

you are dumb, of course there is, i'm studying there right now actually and it's not that hard, it just cost a lot of money and it takes a lot of time to make a part of your own

[Adode310]

hey i have a question... were can i learn to make Carbon Fiber Parts... like is there a school for that?? or something???... im very interested in it,.

[3r4ndo]

poly kalo video, poso peripou kostizei ena kapo gia to mikro mou cento?? aplo, xwris aeragogous kai fouskomata.

[sprsniper15]

ha ha music in the back ground around 1:33

I hope your baggin something that big

[Rayevo888]

dude u are only making your hood look like carbon fiber its not actually made with carbon fiber

[WildTuning]

I assume you dont know much about carbon fiber.

Its obvious, everyone who works with carbon fiber can tell the same, so dont denie it.

We work 100% real carbon fiber.

We dont mix our carbon with fiberglass of use the fake chinese stuff.

Thats why our rear wing is strong enough to handle the weight of 2 women on it.

Your comment was with very light thinging.

We are here for any info you need to know about CF.

Greetings from Greece

[CrazyGuyFromDaBay]

hey is it like a sticker add on too your regular "steel" hood

[WildTuning]

Stickers or airbrushing are for toy cars like hotwheels

Carbon Fiber is for real cars

[CrazyGuyFromDaBay]

im assuming it weights less than the original RX8 trunk. did you have to make a new RX8 trunk or ? are you using the original trunk. i mean i don't get it, is that the original orange RX8trunk. how does it work. i tought carbon fiber was molded like plastic. kinda like the fiber glass they use in NASCAR cars.

[V10SuprA]

What do you need to major in to get a job like this?

[bmydlarz]

Safety is obviously not a concern in this shop, if you know these people, tell them that they need to wear dust masks when cutting carbon fiber, as well a respirator which protects from organic vapors when handling the resin.

[dugwyyy]

+++