Adding proper CV/Gate inputs to a Roland MC-202

[NatureProgramme]

I've gotten my cv mod to work but only intermittently. I used banana plugs and wonder since they are not grounded if this could be part of the problem? I also did not use shielded wire, just run of the mill rubber coated wire.

[NatureProgramme]

Nice!

[pomfrit93]

wow this is wonderfull! double acid .. hell yeah. nice mods.

[efectomariposa93]

Thanks!

Could you tell me where to solder the ground on the mono jacks? I guess it is obvious for anyone with the slightest knowledge in this area, but I am not one of those.

I am doing this mod tonight and this is not described on any site I have found so far...

[efectomariposa93]

@efectomariposa93  The ground on the board I mean of course.

[phono1337]

@efectomariposa93 i guess the easiest place to find teh ground would be the sleeve of any of the cv/gate jacks, then you can use a multimeter to find a more convienient place

[efectomariposa93]

@phono1337 Thanks! I will have a look at this now...Pray for the MC-202.

[phono1337]

@efectomariposa93

well if you are unsure i can always modify if yor you ;) drop me a line on info@dinsync.info

[efectomariposa93]

@phono1337 Thanks, but I will do this now.

But I will surely make more mods later and if I find some too tricky for me, I will let you know for sure!

[StrangeFindings]

Niceone! thnx!