Kershaw Designs E-maxx Dual 700 Motor Conversion

[EmaxxRider]

Milemarks thx got love the power getting

The lipos charger and lvc  Great motors

[EmaxxRider]

Do they fit the e maxx 3903 ?

[milemarkers]

@EmaxxRider

Yes, that kit can be found...

204.186.93.64/NewE-Maxx-700-HO­Conversion.htm

[milemarkers]

The kit at the enxt web address has, I'd say, about 85-90% of the power of a 4S brushless system. But it's cheaper and still water proof.

204.186.93.64/E-Maxx3906-700-H­OConversion.htm

Dan

[cocorocks100]

hey im looking at doing this to my emaxx do you recomend these motors and how much power do they really have like tourqe and acceleration

[14nSilver]

what kind of speed should i expect with two 5000mah 7.2V packs. how much faster would adding a cell to each pack making them each 8.4V total make this system go. Is the original EVX able to withstand 16.8V with those motors

[milemarkers]

@14nSilver

Expect the low 30's with 6 cell apcks and mid to high 30's with 7 cell packs. Yes, these particular motors were chosen to work well with the original EVX.

[14nSilver]

@milemarkers how many teeth should i have on the pinion to get those speeds, 26t 32t or 33t. i also want to be able to wheelie easily

[milemarkers]

@14nSilver

expect mid 30mph. And yes, adding an extra cell to each pack will make a big dfference. The original EVX will hand the 700 motors. However, i'm out of the 700 motors right now. Email me directly at dan @ kershawdesigns,com for alternatives.

[bigguy55100]

damn! u could probably kick ass in a mud bog competition!!!!!

[wtsig76]

what kind of run time will i get with two 5100 8.4v packs? if im running lots of full throttle?

[milemarkers]

@wtsig76

I'd looks for about 12-15 minutes of runtime.

Dan

[Tbomb187]

very nice, How much are the motors and anything else to complete project. I mean total cost of the swap is????? Nice video great driving and showing off the potential power this truck has.

[EmaxxFan]

Where do you get kershaw motors at?

[sournerdhottie]

with all those upgrades is it still waterproof

[milemarkers]

Well, first off, there really are not any upgrades to the truck other than the 700-HO motor kit and a good set of 7 cell packs. And yes it is still waterproof.

[rexxar479]

where do i get these?

[tounne92]

put two 11.1v by losi

[442paul]

unless u want to fuck ur eswc with 22.2v then i would not do that :)

[hardcoretam]

Does anyone know how many turns these motors are?

Can they take 16.8volts at all?

[stewieleetsauce1994]

16.8 volts is what you want for best performance.

[paintsplat20]

how much for 1 motor?

[stewieleetsauce1994]

I'm not sure if they sell it with one motor alone. But they DO sell a 970motor alone.

I would suggest the 970, as it's MORE powerful, and faster.

I'm sure you can contact Dan (as he's a GREAT person to deal with), and he might sell you one 700.. Don't take my word for it.

[hardcoretam]

Seems like a good alternative to brushless to save money

[stewieleetsauce1994]

Definitely.

[hardcoretam]

I bet it has a lot more torque. What ESC can handle those motors though?

What turn are they and/or watts amps drawage?

Them seem a lot quicker to spool up than stock but top end looks the same

[milemarkers]

Any Traxxas EVX, whether it be the original or EVX-2 can handle the motors. They are a 179 watt motor at 14.4V. If the ESC is not overheating, then the motors can be geared up for more speed.

[miniheli]

is that brushless?

[milemarkers]

No. It is powered by 2 x 700-sized brushed motors.

[stewieleetsauce1994]

Though, it may be as powerful, or MORE powerful (MAYBE), than brushless... It's definitely a great alternative.